danggg, cause I'm thinking about getting the CF GT4 Hood over the winterr haha
it looks amazing IMO.
it looks amazing IMO.
GB: Megan Racing Coilovers (94-99 Celica)! - 6G Celicas Forums
hope so 
can't wait man
can't wait man
just looked back through this thread and im just wondering. since the brake lines wont mount up properly..ill have to have zipties too right?
>
Fa sho bro. Use the beefier ones. And check them every now and again.
QUOTE (sunwukongg @ Oct 15, 2010 - 9:37 AM) 
>just looked back through this thread and im just wondering. since the brake lines wont mount up properly..ill have to have zipties too right?
Fa sho bro. Use the beefier ones. And check them every now and again.
taking too long to mod since '09June '12 COTM'95 AT200
guess what i just got...
I want me a pair sooo bad.....How long will this offer last??
>
SWEETTT!!! Thanks for posting the pics!!
>
Currently there is no 'end-date'. I would really suggest getting in on one of the 4 sets left though. Once those are gone, I foresee a long backorder on these again.
QUOTE (sunwukongg @ Oct 15, 2010 - 1:08 PM)
>guess what i just got...
SWEETTT!!! Thanks for posting the pics!!
>
QUOTE (aznpnoiboi55 @ Oct 15, 2010 - 1:35 PM)
>I want me a pair sooo bad.....How long will this offer last??
Currently there is no 'end-date'. I would really suggest getting in on one of the 4 sets left though. Once those are gone, I foresee a long backorder on these again.
Upscale Automotive LLCYour Source for Performance, Reliability, and Stylehttp://www.UpscaleAutomotive.comfulfillment@upscaleautomotive.comPhone: 201-298-3608AIM: SalesUpscaleAuto
i hope there are still some left by the end of december!
this is the out of the box height of the megan coilovers installed on my car. took about 4 hours to install with a buddy. front brake lines didnt mount up so i used stainless steel zipties. the rears mount up perfectly however
wouldve been faster if the old bolts and nuts werent so stubborn >:( its hard to tell cause its night time how low it got. but basically before there was a 4 finger wheel gap. and now i cant even put my finger in. the rear was 2 1/2 finger gap, and now i cant put my finger in there either. damper adjustment to 26. pretty stiff already, but i LOVELOVELOVE the handling now i feel MUCH safer taking corners and much more confident.
This post has been edited by sunwukongg: Oct 19, 2010 - 11:45 PM
>
+100000!! Woooo!! Nothing like the feeling after the install of these. Makes the car feel like a whole new beast!! For those wondering how LOW these can go, just check those pics out and that's before any adjustments!! They can go plenty higher too of course!! Earlier in the thread you can see the pics I posted of the black Celica with 17" wheels sitting a bit higher.
QUOTE (sunwukongg @ Oct 19, 2010 - 11:44 PM)
>this is the out of the box height of the megan coilovers installed on my car. took about 4 hours to install with a buddy. front brake lines didnt mount up so i used stainless steel zipties. the rears mount up perfectly however wouldve been faster if the old bolts and nuts werent so stubborn >:( its hard to tell cause its night time how low it got. but basically before there was a 4 finger wheel gap. and now i cant even put my finger in. the rear was 2 1/2 finger gap, and now i cant put my finger in there either. damper adjustment to 26. pretty stiff already, but i LOVELOVELOVE the handling now i feel MUCH safer taking corners and much more confident.
wouldve been faster if the old bolts and nuts werent so stubborn >:( its hard to tell cause its night time how low it got. but basically before there was a 4 finger wheel gap. and now i cant even put my finger in. the rear was 2 1/2 finger gap, and now i cant put my finger in there either. damper adjustment to 26. pretty stiff already, but i LOVELOVELOVE the handling now i feel MUCH safer taking corners and much more confident.+100000!! Woooo!! Nothing like the feeling after the install of these. Makes the car feel like a whole new beast!! For those wondering how LOW these can go, just check those pics out and that's before any adjustments!! They can go plenty higher too of course!! Earlier in the thread you can see the pics I posted of the black Celica with 17" wheels sitting a bit higher.
Upscale Automotive LLCYour Source for Performance, Reliability, and Stylehttp://www.UpscaleAutomotive.comfulfillment@upscaleautomotive.comPhone: 201-298-3608AIM: SalesUpscaleAuto
dropping it lower on sunday..
>
QUOTE (sunwukongg @ Oct 20, 2010 - 1:04 AM)
>dropping it lower on sunday..
sunwukongg did you happen to take pics of it dropped even lower?
havent done it yet..i dont even know if ill do it anymore. i have 2.5" custom piping and im already scraping it on speedbumps with the out of box height 
..and this is how my car currently looks right now with out of box height with 205/40/17 tires.
..and this is how my car currently looks right now with out of box height with 205/40/17 tires.
>
Looks awesome! You could even raise the rear up a bit and still look really nice!
QUOTE (sunwukongg @ Nov 11, 2010 - 1:13 PM)
>havent done it yet..i dont even know if ill do it anymore. i have 2.5" custom piping and im already scraping it on speedbumps with the out of box height ..and this is how my car currently looks right now with out of box height with 205/40/17 tires.
..and this is how my car currently looks right now with out of box height with 205/40/17 tires.Looks awesome! You could even raise the rear up a bit and still look really nice!
Upscale Automotive LLCYour Source for Performance, Reliability, and Stylehttp://www.UpscaleAutomotive.comfulfillment@upscaleautomotive.comPhone: 201-298-3608AIM: SalesUpscaleAuto
Just sold the last set from the current batch. Not sure on an ETA for more at the moment. If anyone is interested and needs to know ETA, let me know!
Upscale Automotive LLCYour Source for Performance, Reliability, and Stylehttp://www.UpscaleAutomotive.comfulfillment@upscaleautomotive.comPhone: 201-298-3608AIM: SalesUpscaleAuto
will the next set be available by the summer?
Any by mid February? Lmk!
hey upscale can you tell me about how well two set of camber bolts would work as opposed to one and post pics up of where it is installed?
>
We went for 2 sets on the black Celica pictured in this thread. It worked like a charm and gave just enough adjustment for the height and wheels we used.
I meant to get pics a long time ago! Sorry! I will try to get this done asap!
>
Checking and will let you know asap!
QUOTE (sunwukongg @ Dec 30, 2010 - 4:38 AM)
>hey upscale can you tell me about how well two set of camber bolts would work as opposed to one and post pics up of where it is installed?
We went for 2 sets on the black Celica pictured in this thread. It worked like a charm and gave just enough adjustment for the height and wheels we used.
I meant to get pics a long time ago! Sorry! I will try to get this done asap!
>
QUOTE (block @ Dec 30, 2010 - 12:51 AM)
>Any by mid February? Lmk!
Checking and will let you know asap!
Upscale Automotive LLCYour Source for Performance, Reliability, and Stylehttp://www.UpscaleAutomotive.comfulfillment@upscaleautomotive.comPhone: 201-298-3608AIM: SalesUpscaleAuto
>
Next batch is due in January!
QUOTE (block @ Dec 30, 2010 - 12:51 AM)
>Any by mid February? Lmk!
Next batch is due in January!
Upscale Automotive LLCYour Source for Performance, Reliability, and Stylehttp://www.UpscaleAutomotive.comfulfillment@upscaleautomotive.comPhone: 201-298-3608AIM: SalesUpscaleAuto
Megan Racing Street Series, right? Let me know when you get em, I want in.
>
Yes, Street Series. I will post here asap to confirm stock once they are in again.
QUOTE (block @ Dec 30, 2010 - 10:45 PM)
>Megan Racing Street Series, right? Let me know when you get em, I want in.
Yes, Street Series. I will post here asap to confirm stock once they are in again.
Upscale Automotive LLCYour Source for Performance, Reliability, and Stylehttp://www.UpscaleAutomotive.comfulfillment@upscaleautomotive.comPhone: 201-298-3608AIM: SalesUpscaleAuto
Looks like more All-Trac and 00+ Coilovers are now in stock!
Upscale Automotive LLCYour Source for Performance, Reliability, and Stylehttp://www.UpscaleAutomotive.comfulfillment@upscaleautomotive.comPhone: 201-298-3608AIM: SalesUpscaleAuto
i now have the camber bolts...sorry for the newb question but exactly where am i supposed to place these..lol, can you send me pictures of what they're supposed to look like on the coils?
>
This video is for a Mustang, but it's the same process for ours. Same camber bolts too.
http://www.youtube.com/watch?v=ZIBFXe5SW8A
QUOTE (sunwukongg @ Feb 3, 2011 - 10:37 AM)
>i now have the camber bolts...sorry for the newb question but exactly where am i supposed to place these..lol, can you send me pictures of what they're supposed to look like on the coils?
This video is for a Mustang, but it's the same process for ours. Same camber bolts too.
http://www.youtube.com/watch?v=ZIBFXe5SW8A
taking too long to mod since '09June '12 COTM'95 AT200
Just a FYI on the camber bolts. If you go to pepboys, ask them for a camber kit, they have one. Might not be as nice as the eibach's, but I don't recall them being very expensive... Used them on them on my car and it worked out pretty well..car tracks straight and tread wear looks good so far. (needed two kits, 4 bolts)
This post has been edited by al94st: Feb 3, 2011 - 12:27 PM
This post has been edited by al94st: Feb 3, 2011 - 12:27 PM
>
I can second that. They sell a kit that goes farther than the Eibach ones (+2/-2 vs Eibach's +1.5/-1.5) and they sell them for $17 I think.
QUOTE (al94st @ Feb 3, 2011 - 12:23 PM)
>Just a FYI on the camber bolts. If you go to pepboys, ask them for a camber kit, they have one. Might not be as nice as the eibach's, but I don't recall them being very expensive... Used them on them on my car and it worked out pretty well..car tracks straight and tread wear looks good so far. (needed two kits, 4 bolts)
I can second that. They sell a kit that goes farther than the Eibach ones (+2/-2 vs Eibach's +1.5/-1.5) and they sell them for $17 I think.
taking too long to mod since '09June '12 COTM'95 AT200
thanks guys. haha and i dont understand how youre able to put 4 bolts on? O_O
This post has been edited by sunwukongg: Feb 3, 2011 - 7:14 PM
This post has been edited by sunwukongg: Feb 3, 2011 - 7:14 PM
>
^in that image right there you have your camber bolt washer with the large tab pointing inwards..according to the video above it says that gives it moar negative camber..i have too much negative camber and i want it to be more positive..so i would be directing the large tab towards the wheel correct?..
This post has been edited by sunwukongg: Feb 3, 2011 - 7:20 PM
QUOTE (upscaleauto @ May 3, 2010 - 3:26 PM)
>
^in that image right there you have your camber bolt washer with the large tab pointing inwards..according to the video above it says that gives it moar negative camber..i have too much negative camber and i want it to be more positive..so i would be directing the large tab towards the wheel correct?..
This post has been edited by sunwukongg: Feb 3, 2011 - 7:20 PM