>
nice!
and that is roughly 38mm.
QUOTE (808celica @ Jun 1, 2010 - 5:16 AM) 
>1.5" converted into mm???
nice!
and that is roughly 38mm.
:.....Flush Wheel Fitment Guide.....:
:.....Flush Wheel Fitment Guide.....:
Flush Fit Wheel Fitment - 6G Celicas Forums
:.....Flush Wheel Fitment Guide.....:
So my wheel is 7.5" and 45mm offset. the chart says +15mm front and -2mm rear, does that mean I need 30mm spacers on front and 47mm rear?? I'm just trying to understand, I'm not sure I'm doing the math right. That seems a little big
This post has been edited by HectortheRican: Aug 3, 2010 - 12:28 PM
This post has been edited by HectortheRican: Aug 3, 2010 - 12:28 PM
taking too long to mod since '09June '12 COTM'95 AT200
>
get your car up there already!
QUOTE (Harold_Fastwaker @ Feb 9, 2010 - 1:36 AM)
>>
I was going to submit my car once my exhaust is finished and I am fully happy with my stance. So hopefully it will be on there shortly.
QUOTE (808celica @ Feb 8, 2010 - 3:21 AM)
>just something i keep forgetting to post
http://fatlace.com/hellaflush/
Harold, you down???
If I see your car on fatlace i'll get my car up there too
http://fatlace.com/hellaflush/
Harold, you down???
If I see your car on fatlace i'll get my car up there too
I was going to submit my car once my exhaust is finished and I am fully happy with my stance. So hopefully it will be on there shortly.
get your car up there already!
Ok I have question.. Someone might asked this before but my only access to 6gc is thru my phone and I can't serch to much from here cause is slow.. Ok my question is... I want my rear wheels to look flush! I have 18x7.5 35 offset and I already rolled my fenders... The chart says I have to get 37mm sapcers? That's = to 1.5 inches spacers.. Is that right? And I would need to get the camber bolts?
this wheel flush thing is confusing me. LOL....i've been reading so much and it's still confusing! maybe im just not getting this at all...
>
x2 im so confused. im interested in this thread because i like the deep dish rims and want some for my celica but i know you have to have certain measurements/offset which is confusing to me...
QUOTE (block @ Sep 13, 2010 - 11:36 PM)
>this wheel flush thing is confusing me. LOL....i've been reading so much and it's still confusing! maybe im just not getting this at all...
x2 im so confused. im interested in this thread because i like the deep dish rims and want some for my celica but i know you have to have certain measurements/offset which is confusing to me...
QUOTE (Galcobar @ Oct 15, 2008 - 2:44 AM)You want power but have no money. That's a problem.Cheap. Reliable. Fast. Pick two.
tell me about it bro 
i just want my wheels flushed lol
i just want my wheels flushed lol
>
What size are your wheels? diameter, width, offset
QUOTE (easternpiro1 @ Sep 13, 2010 - 11:55 PM)
>>
x2 im so confused. im interested in this thread because i like the deep dish rims and want some for my celica but i know you have to have certain measurements/offset which is confusing to me...
QUOTE (block @ Sep 13, 2010 - 11:36 PM)
>this wheel flush thing is confusing me. LOL....i've been reading so much and it's still confusing! maybe im just not getting this at all...
x2 im so confused. im interested in this thread because i like the deep dish rims and want some for my celica but i know you have to have certain measurements/offset which is confusing to me...
What size are your wheels? diameter, width, offset
taking too long to mod since '09June '12 COTM'95 AT200
right now i have some 7.5 widths on there, but i plan on buying some new ones towards the end of the year. i want some rims with a 2-4 inch lip i like the look just not sure how that applies to the dimension of the rim.
QUOTE (Galcobar @ Oct 15, 2008 - 2:44 AM)You want power but have no money. That's a problem.Cheap. Reliable. Fast. Pick two.
>
You just need to find out the offset & width of the rim you want and use the chart to do the math for spacers Like me for example, I have a 7.5" wide wheel with a +45mm offset. According to the chart, I need a +15mm in the front, and -2mm in the rear, which means I'll need a 30mm spacer up front and a 47mm in the rear (which is crazy, that's too big)
QUOTE (easternpiro1 @ Sep 14, 2010 - 11:12 PM)
>right now i have some 7.5 widths on there, but i plan on buying some new ones towards the end of the year. i want some rims with a 2-4 inch lip i like the look just not sure how that applies to the dimension of the rim.
You just need to find out the offset & width of the rim you want and use the chart to do the math for spacers Like me for example, I have a 7.5" wide wheel with a +45mm offset. According to the chart, I need a +15mm in the front, and -2mm in the rear, which means I'll need a 30mm spacer up front and a 47mm in the rear (which is crazy, that's too big)
taking too long to mod since '09June '12 COTM'95 AT200
http://www.youtube.com/watch?v=IBWeQHZy_nw...ture=grec_index
Great video that gets to the point of pros and cons of spacers
Great video that gets to the point of pros and cons of spacers
[b]My Build Thread|Flickr|My Blog
Great video!! 
taking too long to mod since '09June '12 COTM'95 AT200
so do we use hub centric spacers or the lugs spacers?
i have 17x7.5 35mm offset...
option with roll or not?
how did you guys do the math....i want to be hell flush too.
This post has been edited by chacha: Sep 23, 2010 - 9:08 PM
i have 17x7.5 35mm offset...
option with roll or not?
how did you guys do the math....i want to be hell flush too.
This post has been edited by chacha: Sep 23, 2010 - 9:08 PM
HUB centric
[b]My Build Thread|Flickr|My Blog
>
The chart is on the 1st page of this thread.
QUOTE (chacha @ Sep 23, 2010 - 7:53 PM)
>so do we use hub centric spacers or the lugs spacers?
i have 17x7.5 35mm offset...
option with roll or not?
how did you guys do the math....i want to be hell flush too.
i have 17x7.5 35mm offset...
option with roll or not?
how did you guys do the math....i want to be hell flush too.
The chart is on the 1st page of this thread.
taking too long to mod since '09June '12 COTM'95 AT200
i saw the first page...with mines...since the rims are the same....front and rear...confirming i need 15mm?
>
Nah. The fenders are wider in the back so you need more offset in the rear. Proper offset for 7.5" wide is +15mm front, -2mm rear
QUOTE (chacha @ Sep 23, 2010 - 10:06 PM)
>i saw the first page...with mines...since the rims are the same....front and rear...confirming i need 15mm?
Nah. The fenders are wider in the back so you need more offset in the rear. Proper offset for 7.5" wide is +15mm front, -2mm rear
taking too long to mod since '09June '12 COTM'95 AT200
thanks...so i would ask for a -2mm rear hub cent spacer and +15mm hub cent spacer.
>
Nononononono! That would do nothing lol
Your wheels are +35mm offset, all 4. So fronts need a 20mm spacer to bring it down to +15mm and rears need a 37mm spacer to bring it down to -2mm. Get it? It took me a while too lol
This post has been edited by HectortheRican: Sep 24, 2010 - 12:06 AM
QUOTE (chacha @ Sep 23, 2010 - 10:58 PM)
>thanks...so i would ask for a -2mm rear hub cent spacer and +15mm hub cent spacer.
Nononononono! That would do nothing lol
Your wheels are +35mm offset, all 4. So fronts need a 20mm spacer to bring it down to +15mm and rears need a 37mm spacer to bring it down to -2mm. Get it? It took me a while too lol
This post has been edited by HectortheRican: Sep 24, 2010 - 12:06 AM
taking too long to mod since '09June '12 COTM'95 AT200
man...hahaha....craziness...reading didn't seem like you had to be a rocket scientist to figure it out, BUT the end results makes you feel like a fool; i ended with some many question marks on my face. 
THANKS for the clarification Hec...
This post has been edited by chacha: Sep 25, 2010 - 3:01 AM
THANKS for the clarification Hec...
This post has been edited by chacha: Sep 25, 2010 - 3:01 AM
No problem man
taking too long to mod since '09June '12 COTM'95 AT200
is it possible for me to just get a flushed aggressive stance look without rolling fenders and stretched tires?
>
You only need stretched tires for hellaflush. You can get a great looking and aggressive functional flush look, but you'll still need to roll the rear fenders. The fronts are already rolled.
QUOTE (sunwukongg @ Oct 1, 2010 - 11:28 AM)
>is it possible for me to just get a flushed aggressive stance look without rolling fenders and stretched tires?
You only need stretched tires for hellaflush. You can get a great looking and aggressive functional flush look, but you'll still need to roll the rear fenders. The fronts are already rolled.
taking too long to mod since '09June '12 COTM'95 AT200
>
that looks BA bro, thats how i want mines to look. wat size spacers did u use and did u have to roll the fenders?
QUOTE (Driveby @ May 3, 2010 - 2:07 PM)
>By looking at the pictures Im running a bit of negative camber in the rear Ill have to measure it at work.
Ill have to measure it at work.that looks BA bro, thats how i want mines to look. wat size spacers did u use and did u have to roll the fenders?
st205 powered ss3 coupe
Ok so i think that i may have this,
with my 7th gen gts wheels they have an offset of + 38 i believe, so a 16 mm spacer up front, and a 33mm spacer in the back and i would be flush correct? running 205 series tires
with my 7th gen gts wheels they have an offset of + 38 i believe, so a 16 mm spacer up front, and a 33mm spacer in the back and i would be flush correct? running 205 series tires
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
Damn, 7th gen wheels are 8"?! Didn't know that. But yeah, you'd be flush as a toilet.
Sorry for the pun.
Edit: I did some research and 7th gen wheels are 6.5", from what I found.
This post has been edited by HectortheRican: Nov 16, 2010 - 4:52 PM
Sorry for the pun.
Edit: I did some research and 7th gen wheels are 6.5", from what I found.
This post has been edited by HectortheRican: Nov 16, 2010 - 4:52 PM
taking too long to mod since '09June '12 COTM'95 AT200
the wheels are 6.5 wide but a 205 tire is 8 inches wide
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
>
Gotcha. Why do that, may I so ask? Lol
QUOTE (96stgreendemon @ Nov 16, 2010 - 3:54 PM)
>the wheels are 6.5 wide but a 205 tire is 8 inches wide
Gotcha. Why do that, may I so ask? Lol
taking too long to mod since '09June '12 COTM'95 AT200
was oem spec on the tire and gives me more grip
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
>
Ah, makes sense. Well I think those spacers would work...
QUOTE (96stgreendemon @ Nov 16, 2010 - 3:59 PM)
>was oem spec on the tire and gives me more grip
Ah, makes sense. Well I think those spacers would work...
taking too long to mod since '09June '12 COTM'95 AT200