hey all.


My 7afe already came equipped with an oil cooler so I tee'd that feed for the turbo.

However there is another source (where the oil pressure switch is) but the last time i fitted a t piece, it snapped.

I would like to fit a stainless line to the block, leading to a T piece that will serve the pressure switch, temp gauge and aftermarket oil pressure gauge.

What fittings do I need.

Thanks.

What was the fitting made of? tunertoys.com sells a nice peice that is stainless, and is the proper threa to fit the stock block thread(1/8 bspt) and and 1/8 ntp on the sides to feed the turbo and aftermarket gauges as well.

ah dont remember. almost 2 years ago. have you got a link. basically I don't want a T piece on the block due to vibrations. Would rathe secured to the body or something solid, hence looking for remote system.