**** NOVEMBER 18, 2009....I HAVE ANOTHER WRC GEN3 ST205 3SGTE COMPLETE MOTOR SET UP FOR SALE****


Up for sale is one of my WRC GEN3 ST205 3SGTE COMPLETE Motor sets. There is nothing wrong with this motor set, its just I need to start making some room. I currently have 4 complete motor sets and its just time for one to go. I have gone through this motor set ensuring that EVERYTHING is there. There are no missing parts on this motor set. Motor set includes:

WRC GEN3 ST205 3SGTE motor
AWD transmission
Uncut wiring harness
ECU
ALL the accessories
Intake Manifold
COMPLETE W2A IC kit
Ignitor
Map sensor
etc.

Unlike Importers who dont know the 3SGTE and will sell off "complete" motor sets that are from complete....this set has EVERYTHING!

Price
2600 shipped With W2A IC system

2200 shipped with out W2A IC system for those wanting to go FMIC















Price
2600 shipped With W2A IC system

2200 shipped with out W2A IC system for those wanting to go FMIC

ST_205 front clip with awd parts

Price :
4800 shipped with the rear AWD parts.
4300 shipped without the rear AWD parts.

Pictures:







This post has been edited by _Jim_: Nov 29, 2009 - 4:43 PM

Isn't that pretty damn cheap? Good luck with the sale.

thats amazingly cheap haha...WRC is rare as F!ck....GL with the sale jim

This post has been edited by CelicaST_CALI: Aug 24, 2009 - 11:37 PM

I have been getting a lot of PM's about the differences between the WRC GEN3 ST205 and the standard GEN3 ST205

I copy and pasted this from my build thread (http://www.6gc.net/forums/index.php?showto...20&start=20):

The WRC and the standard ST205 are identical in almost every way except for the fact the WRC has a lot more goodies on it. A WRC came with factory water injection, factory intercooler/heat exchanger sprayer, Antilag system, heat "protection" piece between the header and the TMIC, the hood comes stock with the hood spoiler. The Water injection, intercooler/heat exchanger sprayer, and the anti lag system all come inactive in the street version of the WRC, and only the race car had the ECU to control all of these features. But that doesn't mean we cant get them to work .

The factory water/meth injection nozzle (which looks like a GEN2 Cold Start Injector) comes Installed into the bottom of the throttle body on the WRC edition, which is going be a big help in getting my devils own kit to work on the GEN3. Manny will get a better look at it when he has the motor up there. The problem with the standard ST205 is that when trying to install the nozzle of the devils own kit, you need to install it between the intercooler and the throttle body. The problem here is that the only place to install the nozzle is about 2 inches long and is made of rubber so installing there is not an option. For my setup, with the WRC already having the CSI I have a couple of options. We can try to gut the electronics and drill out the holes of the CSI to the same size holes the devils own claims is X gph (for example 1/8" hole = 5gph's etc). Or option 2 is to completely take the CSI out, as Manny mentioned and cut a 3/8 think flange out of aluminum and drill out the 2 bolt holes and tap in the nozzle that comes with the Devils Own kit and installing it all back together with a GEN2 CSI gasket. Option 2 sounds a bit better because it will be a lot easier to change nozzles when the time comes, instead of taking out the CSI and drilling bigger holes.


The factory intercooler/heat exchanger sprayer also comes inactive on the WRC street car, but I should be able to get around that as well with very little work. The intercooler/heat exchanger sprayer is mounted on the inside of the JDM crash bar, it comes with 3 nozzles pointed at the heat exchanger all on a continuous line that runs to the window washer tank. You cant believe the amount of stuff that is on the WRC window washer fluid tank, it has more wires, pumps, hoses, etc. I believe I read somewhere that the pump for the intercooler/heat exchanger sprayer is a working pump (which also supplies fluid for the water/meth injection), and all that is required to get it working is to wire it in. Well I couldn't find information on when it comes on, how long it sprayers for, or even if it does spray with out a switch. All that I read was that it could be wired in, but made no mention of to control the spray. Realistically I will only need the intercooler/heat exchanger sprayer to work when I am at WOT and wanting to cool the intake charge as much as possible. So based on the lack of information on the factory pump, I will install a new pump in place of the factory pump and connect all the factory lines that go the intercooler/heat exchanger sprayer to the new pump. As for wiring I will tap the power source for the pump to the wire off the Devils Own kit that sends power to the water injection pump so that way I only use the intercooler/heat exchanger sprayer when needed at WOT. So basically when the water injection starts spaying at 11psi, so will the intercooler/heat exchanger sprayer.

As far as the antilag system goes, I am not going to fool around with that for now because I really don't have a need for it. The pea shooter ct20b spools plenty fast on its own and doesn't need any help. I have some ideas for the antilag, but they aren't going to come into play until I am ready to upgrade to a bigger turbo. And no, not all antilag systems will destroy turbos. Many EVO's use antilag and hold up just fine turbo/motor. I will do more research on this to see what makes the EVO antilag system less harsh compared to other systems. I obviously cannot use the antilag system like the WRC race car had, but with the plumbing in place, I do have a few options. Just need time, and a bigger turbo to make it all worth considering. In due time.

The WRC GEN3 ST205 also comes with a Steel wheel CT20B, which is less likely to fatigue/fail as compared to its Ceramic cousin (Standard Ceramic CT20B found on the Standard GEN3 ST205). It can also handle Higher boost MUCH more safely then the Cearmic CT20B found on the Standard GEN3's

For a shorter version, the differences are:
Steel Wheel CT20B
Factory water injection
Added heat protection for the W2A IC
Antilag system installed, by inactive


Rumors of the WRC that I have yet to confirm or deny:
More aggressive ECU
Stronger AWD transmission

On my BONE STOCK WRC GEN3 Swap, I made 330WHP (about 400bhp) and 310WTQ at 21psi with nothing more then Intake, exhaust, Boost controller, and water injection.

dibs on this as well.. pm sent

PM replied

Do you own, jdm engine depot? LOL. If you have this in the next 2 months LMK. Dont have money right now, plust torn between this and a beams...

i will take it if you install it for me lol.

God i need to start saving my money. I've been wanting and needing a 3s for so long.. But can't seem ta save any money lol.. Well if this is still for sale in the next couples months i might just have ta take it..

you accepting payments

man check your pms,,, i have sent you 2 already and no answer......

guys he's currently selling this set to me.. transaction should be finished in a few days.

you gotta be kidding me man!!! u sure
i wanted it so bad!

JIM!!! GET ONLINE SO I CAN BUY THIS MOTOR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

hahaha, NP man.

hey Jim it went through.. im 3Gs shorter in my balance lol.

i knew it looked familiar, I almost bought it when it was still on ebay

This post has been edited by lalojamesliz: Sep 12, 2009 - 4:14 AM

I HAVE ANOTHER WRC GEN3 ST205 3SGTE COMPLETE MOTOR SET UP FOR SALE

see first page/post for details and pricing.

pictures of the clip :

Looking REAL sexy!!!!!

Super clean

Jim, if you sell a gen3 clip and the buyer just wants the motor I will pay big bucks for fenders and a guage cluster without a spider crack in it *sigh*

This post has been edited by presure2: Nov 28, 2009 - 12:35 PM

I just wanna let anyone kno that may have a question for Jim that he wont be home until moday night so any pms will not be answered until then, he will get to them but there will be a delay. Sorry.

>
that is not an wrc..........

I am sorry I really am not sure what he has sold and hasn't sold all I know is he asked me to put the pictures up. If he told you he has it he prob does please don't go by me. I should just not say anything lol I was trying to help but I don't think I am.

Just checked the pms and the engine has not sold but there is interest in it.

For the clip its a gt-4 clip and he has the awd parts with 50k orignally miles price he pmed to someone was as follows.
4800 shipped with the rear AWD parts.
4300 shipped without the rear AWD parts.

This post has been edited by supershannon77: Nov 29, 2009 - 4:32 PM

Front clip is still available. I will not be taking any parts from it so no worries.

Jim an I would like ideas on how to better this service I think we will give members 1-2 weeks to look over any engine and let us no what part could be broke or missing. After the set date it will become the buyers responsible but we are always a pm or phone call away for help or advice.

What do you as buyers feel? Any suggestions?

This post has been edited by supershannon77: Dec 1, 2009 - 11:49 PM

>

No. The fact that he helps with problems and troubleshooting and anything else that may occur (taking his/your word for it that he did) shows he's a good seller. I would rather pay extra for an engine from him (again, taking his/your word for it that he checks compression and completion of parts) than have to buy from somebody I don't know from ebay.

This post has been edited by SwissFerdi: Dec 1, 2009 - 12:21 PM

to the OP: if i still had a celica id be all over this clip. GLWS
i miss my celica so much these days

This post has been edited by spolski07: Dec 1, 2009 - 2:49 PM

jim... i want this engine soo badly... haha. i have come to the decision that i want a 3rd gen 3s. i don't have money or time right now. i was however wondering where you bought all of your 3s engines from ebay, i guess. if this is still available in june i will gladly take it off your hands!

>

Garin, I have a few importers that I deal with. They call me when they get motors in, then I go there, inspect them, and if the motors are in good condition, I buy them.