Like the title says, I blew the 100 A ALT fuse in the engine bay. Naturally, nothing power works anymore (widows, locks, radio, etc). So, I'm trying to remove the fuse and the darn thing won't budge. I can remove every other fuse inside the box except the one I need out. The plastic is old and brittle, and of course broke while trying to force it out. Can anyone else confirm the difficulty of removing the fuse? I have pulled and yanked to no avail and have destroyed the fuse in the process. When I ever do get the fuse out, will this be a dealer specific part or would some place like Autozone carry a 100 A fuse? Thanks.

that fuse is bolted in 8mm bolt.

Can you please elaborate on how to get to the bolt? I have taken the fuse box apart, but there is no slack in the wires, so I can't really maneuver around at all. Is the bolt directly below the fuse? Thanks.

I found this: http://www.6gc.net/forums/index.php?showto...814&hl=fuse

But when I release the four clips holding the fuse casing I still can not pull it down. It's loose on one end, but not loose near the 100 ALT fuse. It feels like something else is attached.

Finally got the fuse casing out, removed the two bolts and replaced the the fuse