drilling for new spoiler - 6G Celicas Forums

silverceli09

#1

i just purchased a TRD "style" wing and i have to drill new holes for it. can anyone show me some pics or tell me how they went about doing it. i'm sure somebody out there has had to drill for a new spoiler. thanks in advance

Celica Or Die, check outhttp://www.redlinemotive.com!

presure2

#2

you use a drill thru the top, cut thru the several layers of metal, then use a holesaw on the underside to create room for the bolts.

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

njccmd2002

#3

you did not see my post!!!!!! see the last ones......

it all depends where your holes go, thats what you need to do, this is on a vert, with a two post spoiler

>

QUOTE

>did a little drilling. difficult to make the template. but did it...

this holes to fit the socket were a pain in the arse

this helped a lot

the spoiler had no screws, could not find a proper set.

tapped in some 30 mm, and with a little JB weld. will cut tomorrow... Oh the spoiler is primed...

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

drilling for new spoiler - 6G Celicas Forums

Contact 6GC Archives