hey guys my pedal is having a tough time returning...i checked for leaks there are none and it will only do it with the car on if the car is off it works perfect
clutch pedal - 6G Celicas Forums
bump now it doesnt return
its either the master or the slave.
if you pump the pedal and hold it down, and the slave comes out and slowly goes back in, the slave is bad. if the slave dont move at all, the master is bad.
if you pump the pedal and hold it down, and the slave comes out and slowly goes back in, the slave is bad. if the slave dont move at all, the master is bad.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
>
i was just about to say that...
QUOTE (presure2 @ Jun 18, 2009 - 9:12 AM) 
>its either the master or the slave.
if you pump the pedal and hold it down, and the slave comes out and slowly goes back in, the slave is bad. if the slave dont move at all, the master is bad.
if you pump the pedal and hold it down, and the slave comes out and slowly goes back in, the slave is bad. if the slave dont move at all, the master is bad.
i was just about to say that...
>
ok thanks man gotta check yhat
QUOTE (presure2 @ Jun 18, 2009 - 9:12 AM)
>its either the master or the slave.
if you pump the pedal and hold it down, and the slave comes out and slowly goes back in, the slave is bad. if the slave dont move at all, the master is bad.
if you pump the pedal and hold it down, and the slave comes out and slowly goes back in, the slave is bad. if the slave dont move at all, the master is bad.
ok thanks man gotta check yhat
>
well now my next problem would be getting these parts......cause they are not local
QUOTE (pipes @ Jun 18, 2009 - 9:36 AM)
>>
ok thanks man gotta check yhat
QUOTE (presure2 @ Jun 18, 2009 - 9:12 AM)
>its either the master or the slave.
if you pump the pedal and hold it down, and the slave comes out and slowly goes back in, the slave is bad. if the slave dont move at all, the master is bad.
if you pump the pedal and hold it down, and the slave comes out and slowly goes back in, the slave is bad. if the slave dont move at all, the master is bad.
ok thanks man gotta check yhat
well now my next problem would be getting these parts......cause they are not local
ok good news guys for those who care... i rebuilt my clutch master car is back on the road again
sounds like the best solution for you
I was gonna say, pipe leak. I had that with a Passat once. If the rebuild worked for you, that's great news!
Sweet deal...I think I have the closest replacement for your master cylinder and you aren't getting mine 
what did you rebuild it with?
what did you rebuild it with?
>
toyota has a rebuild kit with new spring seals and clips
QUOTE (playr158 @ Jun 23, 2009 - 7:45 AM)
>Sweet deal...I think I have the closest replacement for your master cylinder and you aren't getting mine
what did you rebuild it with?
what did you rebuild it with?
toyota has a rebuild kit with new spring seals and clips
bringing this back up. my clutch pedal occasionally gets stuck while at a stop and sometimes when i accelerate while letting go of the clutch pedal, the pedal gets sucked back in on its own so I imagine one or both of my clutch cylinders need to be replaced or fixed. i want to rebuild my clutch cylinders on my own instead of purchasing an entirely new cylinder assembly. can you post the part number for the rebuild kit as I can't seem to find it on toyodiy. thanks.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
>
sorry i took so long its not hard to rebuild 20 mins tops.... http://www.toyodiy.com/parts/p_J_1995_TOYO...BLMVZ_3103.html
QUOTE (azian_advanced @ Oct 19, 2009 - 2:02 AM)
>bringing this back up. my clutch pedal occasionally gets stuck while at a stop and sometimes when i accelerate while letting go of the clutch pedal, the pedal gets sucked back in on its own so I imagine one or both of my clutch cylinders need to be replaced or fixed. i want to rebuild my clutch cylinders on my own instead of purchasing an entirely new cylinder assembly. can you post the part number for the rebuild kit as I can't seem to find it on toyodiy. thanks.
sorry i took so long its not hard to rebuild 20 mins tops.... http://www.toyodiy.com/parts/p_J_1995_TOYO...BLMVZ_3103.html
I cant' seem to get my Celi into gear. The clutch pedal goes down and comes back up ok, but it feels REALLY loose.
Ideas?
Ideas?
KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
>
Should I get all 3?
>>04311 CYLINDER KIT, CLUTCH MASTER
04311-12080 ST20*..MTM 1 $42.57
04311-12110 ST20*..MTM 1 $38.62
04311-60150 ST20*..MTM 1 $35.69 >>
QUOTE (pipes @ Oct 20, 2009 - 5:15 PM)
>>
sorry i took so long its not hard to rebuild 20 mins tops.... http://www.toyodiy.com/parts/p_J_1995_TOYO...BLMVZ_3103.html
QUOTE (azian_advanced @ Oct 19, 2009 - 2:02 AM)
>bringing this back up. my clutch pedal occasionally gets stuck while at a stop and sometimes when i accelerate while letting go of the clutch pedal, the pedal gets sucked back in on its own so I imagine one or both of my clutch cylinders need to be replaced or fixed. i want to rebuild my clutch cylinders on my own instead of purchasing an entirely new cylinder assembly. can you post the part number for the rebuild kit as I can't seem to find it on toyodiy. thanks.
sorry i took so long its not hard to rebuild 20 mins tops.... http://www.toyodiy.com/parts/p_J_1995_TOYO...BLMVZ_3103.html
Should I get all 3?
>>04311 CYLINDER KIT, CLUTCH MASTER
04311-12080 ST20*..MTM 1 $42.57
04311-12110 ST20*..MTM 1 $38.62
04311-60150 ST20*..MTM 1 $35.69 >>
----------------------------------------------------------------------------------------------------------------------------------------------------------------
>
no im sorry they will all work just cant remember wich one iklkl check at work 2morrow.....if anything ask them wich one is 20.50 if you weere an employee and thats the one you need
QUOTE (azian_advanced @ Oct 20, 2009 - 9:08 PM)
>>
Should I get all 3?
>>04311 CYLINDER KIT, CLUTCH MASTER
04311-12080 ST20*..MTM 1 $42.57
04311-12110 ST20*..MTM 1 $38.62
04311-60150 ST20*..MTM 1 $35.69 >>
QUOTE (pipes @ Oct 20, 2009 - 5:15 PM)
>>
sorry i took so long its not hard to rebuild 20 mins tops.... http://www.toyodiy.com/parts/p_J_1995_TOYO...BLMVZ_3103.html
QUOTE (azian_advanced @ Oct 19, 2009 - 2:02 AM)
>bringing this back up. my clutch pedal occasionally gets stuck while at a stop and sometimes when i accelerate while letting go of the clutch pedal, the pedal gets sucked back in on its own so I imagine one or both of my clutch cylinders need to be replaced or fixed. i want to rebuild my clutch cylinders on my own instead of purchasing an entirely new cylinder assembly. can you post the part number for the rebuild kit as I can't seem to find it on toyodiy. thanks.
sorry i took so long its not hard to rebuild 20 mins tops.... http://www.toyodiy.com/parts/p_J_1995_TOYO...BLMVZ_3103.html
Should I get all 3?
>>04311 CYLINDER KIT, CLUTCH MASTER
04311-12080 ST20*..MTM 1 $42.57
04311-12110 ST20*..MTM 1 $38.62
04311-60150 ST20*..MTM 1 $35.69 >>
no im sorry they will all work just cant remember wich one iklkl check at work 2morrow.....if anything ask them wich one is 20.50 if you weere an employee and thats the one you need
>
Gerard; do you have an ST205? those parts that he linked us to were for the 205 chassis. The parts for the 204 are significantly different in price...
QUOTE (azian_advanced @ Oct 20, 2009 - 7:08 PM)
>>
Should I get all 3?
>>04311 CYLINDER KIT, CLUTCH MASTER
04311-12080 ST20*..MTM 1 $42.57
04311-12110 ST20*..MTM 1 $38.62
04311-60150 ST20*..MTM 1 $35.69 >>
QUOTE (pipes @ Oct 20, 2009 - 5:15 PM)
>>
sorry i took so long its not hard to rebuild 20 mins tops.... http://www.toyodiy.com/parts/p_J_1995_TOYO...BLMVZ_3103.html
QUOTE (azian_advanced @ Oct 19, 2009 - 2:02 AM)
>bringing this back up. my clutch pedal occasionally gets stuck while at a stop and sometimes when i accelerate while letting go of the clutch pedal, the pedal gets sucked back in on its own so I imagine one or both of my clutch cylinders need to be replaced or fixed. i want to rebuild my clutch cylinders on my own instead of purchasing an entirely new cylinder assembly. can you post the part number for the rebuild kit as I can't seem to find it on toyodiy. thanks.
sorry i took so long its not hard to rebuild 20 mins tops.... http://www.toyodiy.com/parts/p_J_1995_TOYO...BLMVZ_3103.html
Should I get all 3?
>>04311 CYLINDER KIT, CLUTCH MASTER
04311-12080 ST20*..MTM 1 $42.57
04311-12110 ST20*..MTM 1 $38.62
04311-60150 ST20*..MTM 1 $35.69 >>
Gerard; do you have an ST205? those parts that he linked us to were for the 205 chassis. The parts for the 204 are significantly different in price...
KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
>
What if the pedal goes in and comes back out, but I cannot feel the clutch engage?
QUOTE (presure2 @ Jun 18, 2009 - 7:12 AM)
>its either the master or the slave.
if you pump the pedal and hold it down, and the slave comes out and slowly goes back in, the slave is bad. if the slave dont move at all, the master is bad.
if you pump the pedal and hold it down, and the slave comes out and slowly goes back in, the slave is bad. if the slave dont move at all, the master is bad.
What if the pedal goes in and comes back out, but I cannot feel the clutch engage?
KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|