Over 1M Posts • 84K Topics • 9K Authors

alarm remote problem - 6G Celicas Forums

Topic #66370 6 posts Started by GaryZR
hey guys im sort of new on this site. i have the factory toyota alarm that came with my 95 zr and i seem to have a problem with the remote. i unplugged the module under the passengers seat then put it back in and the remote would still not work. i put a brand new battery in the remote the light only comes up when i press hard on the button. sometimes it works and sometimes it doesnt. i was unable to drive my car for a week! so now im locking the car with the key. i was wondering if i could find another 'celica remote' and how would i program it. where can i find another remote? i have checked this forum and ebay, no luck.
gary
Hi mate,

Your better off getting a new alarm, then trying to fix the current issue.
The standard alarm is out of date now, security wise. So your better off upgrading to a new 3 point immobilisers, black wiring and you can get a few more features like window lifters etc.

98 ST204 ZR - Black Beauty - Roaming the streets of Sydney73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser75 TA22 LT - Snow White - Mint Classic Weekend Cruiser77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser94 MX-5 NA8 Clubman - Red Racer - Looking for cornersWIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona86 Corona RT142 - Daily Driver6GC 4 Life Baby!!!
>
QUOTE (GaryZR @ Mar 25, 2009 - 5:46 AM) *
>hey guys im sort of new on this site. i have the factory toyota alarm that came with my 95 zr and i seem to have a problem with the remote. i unplugged the module under the passengers seat then put it back in and the remote would still not work. i put a brand new battery in the remote the light only comes up when i press hard on the button. sometimes it works and sometimes it doesnt. i was unable to drive my car for a week! so now im locking the car with the key. i was wondering if i could find another 'celica remote' and how would i program it. where can i find another remote? i have checked this forum and ebay, no luck.
gary


The following might help - Did for me

1. Make sure it's all plugged back in
2. Put the key in the intition and turn it to on (not start, i.e. you can use all the stuff like lights/radio but the engine is not running)
3. Hold down the bottom button on the alarm fob (and keep holding)
4. Start the car (still holding button)
5. When started, release alarm buttom.
6. Take out key, get out of car and try to lock it using the fob.

Hope this Helps

This post has been edited by LTom: Mar 25, 2009 - 12:33 PM
i tried that but button plays around. finally bought a new remote from a dealer for about 127 AUD just gotta research on how to program it. i can get it done for 34 AUD. thank for the help anyways.
I just had to reprogram mine this past week after having my battery disconnected for a while. It was a fluke that I figured it out, but the steps LTom posted are the basic procedure. I just turned the ignition to ON, then pressed and held the bottom remote button. The light would come on, then after a few seconds the light flashed a few times. Then I turned off the car, pressed the top button on the remote, and everything worked again.
search rs3000 remote on ebay, there are a few on.

1994 Supra TT1999 Cadillac Escalade (winter ride/tow truck)1994 Celica GT-4 Converted1998 Celica GT-4 Converted1987 Corolla FX1986 Corolla AE86 (Next Project)