So Im currently looking into converting my 94 st headlights to a projector style but Im at a bit of a loss. So if I was theoretically able to get all 4 headlights off of a gt4 is it possible to just to replace the projector unit with an LED one that already has a cutoff shroud built in? What complications would come from this?
Projector Modification Write-Up - 6G Celicas Forums
soooo. im doing this because i cant stand the ugly cut off and i hate these headlight covers that i bought for $70. it also gives me an excuse to take off the bumper to maybe install fogs. but really
$52 for this nissan stuff!? whats the alternative 3m stuff???
https://www.amazon.com/Genuine-Nissan-B6553...t/dp/B00GKBDG4A
$52 for this nissan stuff!? whats the alternative 3m stuff???
https://www.amazon.com/Genuine-Nissan-B6553...t/dp/B00GKBDG4A
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
I used Morimoto RetroRubber a few months back when I had to open up the headlights and refurbish them a bit for my LeMons Celica. Worked fine, excellent reviews. Once I got the process down (bake, open reseal, re-bake), it was very simple.
https://www.theretrofitsource.com/morimoto-...UTYL?quantity=1
https://www.theretrofitsource.com/morimoto-...UTYL?quantity=1
Yes, and you can dispense it with a hot melt glue gun to do an even better job!
https://youtu.be/XUj-CGDHtHw
You need a glue gun you don't care about and a 7/16ths threaded rod to advance the butyl rubber in the gun once it's cut into sections.
https://youtu.be/XUj-CGDHtHw
You need a glue gun you don't care about and a 7/16ths threaded rod to advance the butyl rubber in the gun once it's cut into sections.
2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E
ahh got it i see some butly tape on amazon for around $25. but wow that link for morimoto has it in grey like oem...
luckly the window guy at my dealership gave me a tube of his black sealant.
if youve got a big enough oven. you can easily fit both lights.
cook @ 250 degree Fah for 7 minutes and remove one headlight, separate glass and grab the last one.
This post has been edited by BonzaiCelica: Feb 28, 2021 - 1:44 AM
luckly the window guy at my dealership gave me a tube of his black sealant.
if youve got a big enough oven. you can easily fit both lights.
cook @ 250 degree Fah for 7 minutes and remove one headlight, separate glass and grab the last one.
This post has been edited by BonzaiCelica: Feb 28, 2021 - 1:44 AM
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
this is what lagos and bitter were talking about. differences between a halogen projector assy and a HID projector assmebly
https://www.theretrofitsource.com/morimoto-...LACK?quantity=1
https://www.theretrofitsource.com/morimoto-...LACK?quantity=1
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514