so here is my question i was curious to who made the lowest drop spring for a 6g this is the the first 6g I have ever owned. Im not sure if i want to go with coil overs or not yet . any in put is appreciated thanks!
how low can i go - 6G Celicas Forums
tanabe df210
2.2" front, 1.5" rear
2.2" front, 1.5" rear
here
http://www.6gc.net/forums/index.php?showto...62&hl=df210
there are more, use the SEARCH button top right corner
http://www.6gc.net/forums/index.php?showto...62&hl=df210
there are more, use the SEARCH button top right corner
that sounds like the front will dip lower than the rear because even with equal drop it looks like it already.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
1999 Celica GT
thats what I thought too but remember our rear fenders arch is smaller than the front, I've tried two springs TRD and INTRAX and they created a CALI type drop look. Front lower and rear higher, my car is a good example. You cannot compare the factory springs with aftermarket because they are not the same in terms of spring rate or height in that matter. 240s are another great example, the rears have to be lowered more than the front because its not the gap people look at, its the level of the cars body.
This post has been edited by trdproven: Feb 14, 2009 - 9:13 PM
This post has been edited by trdproven: Feb 14, 2009 - 9:13 PM
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
got tanabes just installed on my car not too long ago and they ride really nice, now im shopping for rims, sorry to jack your thread, but will 17x8 with 15 offset sit flush with the fender? or will it still look sucked in as opposed to be ligned up with the fender???
I have megan springs on mine. It drops pretty low esp with the 15 inch stock rims. My gap is approx 3 in front and 1 1/2 in back. Although Id like to go lower, it scrapes a lot. I had ground control before and I tucked my tires under the fender. It scraped like no tomorrow. Megan springs ride nice. Very clean cut and stable ride.

tanabe df210's on 205/50zr16 tires
perfect height IMO
This post has been edited by spolski07: Mar 2, 2009 - 11:52 PM
2015 Subaru WRX. World Rally Blue/Black2001 Honda S2000. Spa Yellow/Black
^^^that does look good
but what if i were on 215/45/17s?
i don't feel like doing the math haha
but what if i were on 215/45/17s?
i don't feel like doing the math haha


215/45r17's
This post has been edited by spolski07: Mar 2, 2009 - 11:59 PM
2015 Subaru WRX. World Rally Blue/Black2001 Honda S2000. Spa Yellow/Black
wow thanks.
that's not as low as i hoped it be tho.
might have to go with ground-controls
that's not as low as i hoped it be tho.
might have to go with ground-controls
Looks like stock still Scott. Go lower Promasta. Go with full coilovers or Intrax. Best to have 1 finger gap or slightly none. Our cars are so damn high.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
Mine´s little bit lowered but it´s sometimes hardcore on our roads here in Czech Republic, mainly after winter there´s lot of holes everywhere .. :-(
´95 T20 GT
^what springs are u runing
´95 T20 GT
