Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #65221

ST205 Reinforcement Frame Brackets - 6G Celicas Forums

Topic #65221 3 posts Started by Random_Stranger
Random_Stranger
#1
Ok, I haven't taken my bumper apart yet, although I noticed on the frame brackets, there are places where bolts go. The hole is very long. Am I going to be able to bolt it up with bolts from my old reinforcement bar or am I going to need those long ass bolts that require a nut to be screwed into like the bolts that go through the motor mounts? If so, do you have any clue where I might be able to pick these up at?
91 MR2 Turbo SW20, 92 MR2 Turbo SW20, 95 Celica GT ST204
presure2
#2
>
QUOTE (Random_Stranger @ Jan 30, 2009 - 3:09 PM) *
>Ok, I haven't taken my bumper apart yet, although I noticed on the frame brackets, there are places where bolts go. The hole is very long. Am I going to be able to bolt it up with bolts from my old reinforcement bar or am I going to need those long ass bolts that require a nut to be screwed into like the bolts that go through the motor mounts? If so, do you have any clue where I might be able to pick these up at?

all the old hardware will work.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
Random_Stranger
#3
>
QUOTE (presure2 @ Jan 30, 2009 - 12:37 PM) *
>>
QUOTE (Random_Stranger @ Jan 30, 2009 - 3:09 PM) *
>Ok, I haven't taken my bumper apart yet, although I noticed on the frame brackets, there are places where bolts go. The hole is very long. Am I going to be able to bolt it up with bolts from my old reinforcement bar or am I going to need those long ass bolts that require a nut to be screwed into like the bolts that go through the motor mounts? If so, do you have any clue where I might be able to pick these up at?

all the old hardware will work.



Oh Excellent! Thanks Manny. Sorry I wasted a thread about this. You can delete it if you like.
91 MR2 Turbo SW20, 92 MR2 Turbo SW20, 95 Celica GT ST204
← Back to Topics