abstavros

#1

I am looking for 3rd generation 3sgte engine used cylinder block, in good condition.
Please, it's emergency.

slow_yota

#2

haha.
Good luck.
Im pretty sure you can use any 3sfe or
3sge short block if you swap over the turbo
stuff onto the new block.

abstavros

#3

>

QUOTE (slow_yota @ Jan 22, 2009 - 6:20 AM)

>haha.
Good luck.
Im pretty sure you can use any 3sfe or
3sge short block if you swap over the turbo
stuff onto the new block.

Thanks a lot for your help!!!
I will ask my mechanic for this.

slow_yota

#4

No problem, Only hard part would be is to find the turbo oil feed and return line.
Prolly have to buy it new Unless you already have these parts on the 3rd gen.

abstavros

#5

>

QUOTE (slow_yota @ Jan 25, 2009 - 8:14 AM)

>No problem, Only hard part would be is to find the turbo oil feed and return line.
Prolly have to buy it new Unless you already have these parts on the 3rd gen.

No, my only problem is the brocken cylinder block.

slow_yota

#6

>

QUOTE (abstavros @ Jan 26, 2009 - 10:07 PM)

>>

QUOTE (slow_yota @ Jan 25, 2009 - 8:14 AM)

>No problem, Only hard part would be is to find the turbo oil feed and return line.
Prolly have to buy it new Unless you already have these parts on the 3rd gen.

No, my only problem is the brocken cylinder block.

I just received a bare 1st gen 3sgte block.
I could sell you it if you couldt find anything else.
Shipping alone would prolly be in the $300-ish range though.

abstavros

#7

>

QUOTE (slow_yota @ Jan 26, 2009 - 11:56 PM)

>I just received a bare 1st gen 3sgte block.
I could sell you it if you couldt find anything else.
Shipping alone would prolly be in the $300-ish range though.

Thanks for your offer, your interest and your help.
But my mechanic says that the 1st and 2nd gen. bocks are not so strong and they will not bear.
Finally I thing that I will buy a new one.

abstavros

#8

End of searching.
Locked it please.