I was thinking about getting some based on what i saw on a members picture on the forums, but i dont know much about them and i cant seem to find much, or anything, about them on the internet. Are there different kinds of front splitters or are they all the same? and if you've got them on your car or have a pic of them go ahead and post it! thanks
Front Splitters - 6G Celicas Forums
1. SS-III (only fits 96-99)
2. TRD (Fits all)
3. Eurou (Fits all)
This post has been edited by whatthe: Dec 8, 2008 - 2:04 AM
2. TRD (Fits all)
3. Eurou (Fits all)
This post has been edited by whatthe: Dec 8, 2008 - 2:04 AM
[b]My Build Thread|Flickr|My Blog
this are my real TRD front splitter
and what they should look like when they are on (that's rustybolt's car)
There are also SSIII splitters and Euro splitters
and what they should look like when they are on (that's rustybolt's car)
There are also SSIII splitters and Euro splitters
whatthe, if you're going to list the TRD splitters as fitting all years, you have to say the same about the SSIII's...
^ actually the grooves on the end where it was made for the fitting of the 96+ bumpers fogs. It was made for 96+ so that is what i stated. But if it tickles your fancy to put it on a preface lift bumper like your picture you can.
[b]My Build Thread|Flickr|My Blog
Thanks guys, i'm pretty sure the eurou one was the one i saw and liked. I can't find anything on it on the internet though, at least from 5 or 6 different google searches and the parts database on the site here. Is there a place to get them that you know of?
ChrisC got mine from him OEM brand new.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
Nice, thanks man
Edit: is that his member name? i did a search and it didnt come up with anything
This post has been edited by circuscatch85: Dec 8, 2008 - 10:25 AM
Edit: is that his member name? i did a search and it didnt come up with anything
This post has been edited by circuscatch85: Dec 8, 2008 - 10:25 AM
ChrisC makes fibreglass replicas, not OEM 
I haven't seen anything of him for quite a while now....
his company is called Hediko, maybe find something on the net...
I haven't seen anything of him for quite a while now....
his company is called Hediko, maybe find something on the net...
-LukeMy Flickr
>
I got some from him.....cheap and fast service, but fibreglass copies that dont withstand much abuse...but easily repairable and paintable...what more can you want
QUOTE (manphibian @ Dec 8, 2008 - 12:40 PM) 
>ChrisC makes fibreglass replicas, not OEM
I haven't seen anything of him for quite a while now....
his company is called Hediko, maybe find something on the net...
I haven't seen anything of him for quite a while now....
his company is called Hediko, maybe find something on the net...
I got some from him.....cheap and fast service, but fibreglass copies that dont withstand much abuse...but easily repairable and paintable...what more can you want
My Facebook GT4 Build page.https://www.facebook.com/groups/GT4Rebuild
hold on... not trying to threadjack but what rims are those on "rustybolt"?
>
Nice thanks man, I went on to his site and he has a lot of good stuff, including those splitters. Unfortunately they're fiberglass, and i live in the countryside so i'm worried about durability issues. Does anyone know of metal ones?
QUOTE (manphibian @ Dec 8, 2008 - 12:40 PM)
>ChrisC makes fibreglass replicas, not OEM
I haven't seen anything of him for quite a while now....
his company is called Hediko, maybe find something on the net...
I haven't seen anything of him for quite a while now....
his company is called Hediko, maybe find something on the net...
Nice thanks man, I went on to his site and he has a lot of good stuff, including those splitters. Unfortunately they're fiberglass, and i live in the countryside so i'm worried about durability issues. Does anyone know of metal ones?
Trust me - I got OEM euro splitters not fiberglass from him in a Toyota Box with toyota paperwork and he special ordered them not made them. Problem with euro splitters when I had them on was they are thinner than OEM sides and appear to be missing from a rear angle. Only good view of euro splitters is the front or front angle.
This post has been edited by trdproven: Dec 8, 2008 - 3:57 PM
This post has been edited by trdproven: Dec 8, 2008 - 3:57 PM
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
>
Oh okay nice thats good news about him ordering OEM. So by having them on are there any bad angles. i mean, does it look worse than stock from any angle or does it look good from some, and then normal from the others?
QUOTE (trdproven @ Dec 8, 2008 - 3:50 PM)
>Trust me - I got OEM euro splitters not fiberglass from him in a Toyota Box with toyota paperwork and he special ordered them not made them. Problem with euro splitters when I had them on was they are thinner than OEM sides and appear to be missing from a rear angle. Only good view of euro splitters is the front or front angle.
Oh okay nice thats good news about him ordering OEM. So by having them on are there any bad angles. i mean, does it look worse than stock from any angle or does it look good from some, and then normal from the others?
They look good anywhere near the front. I wouldn't really expect to see front splitters from the back of the car They can never look worse than without any....
They can never look worse than without any....
-LukeMy Flickr
Sorry to hi-jack this thread, though if anyone's interested I've got a set of the Euro splitters (unpainted) for sale. £45+p&p? (not sure what that comes to in $$)
pm me if you're interested.
[hijack mode off/]
and to contribute to the thread, my personal fave is the SSIII splitters, totally suits the lines of the facelift bumper and gives such a beatiful stance to the front of the car.
This post has been edited by raz128: Dec 8, 2008 - 6:12 PM
pm me if you're interested.
[hijack mode off/]
and to contribute to the thread, my personal fave is the SSIII splitters, totally suits the lines of the facelift bumper and gives such a beatiful stance to the front of the car.
This post has been edited by raz128: Dec 8, 2008 - 6:12 PM
My GT4..http://www.geocities.com/raz_128/celica.html
Yea you can't see the front splitters from the rear angle. They are not leveled evenly with OEM side skirts from the side view. But they do look awesome from the front view and front angled view even with sides. Manphibian is right though, better to have it than not at all. His set up actually goes well with his whole euro styling. Good job, I noticed you had the splitters, sides, and blocks.
This post has been edited by trdproven: Dec 8, 2008 - 7:20 PM
This post has been edited by trdproven: Dec 8, 2008 - 7:20 PM
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
how much does the euro splitters run
>
The Hediko guys website says 80 pounds i believe, so 120 bucks plus shipping i suppose
QUOTE (Akirad1 @ Dec 8, 2008 - 8:36 PM)
>how much does the euro splitters run
The Hediko guys website says 80 pounds i believe, so 120 bucks plus shipping i suppose
Its about that price - only thing is that make sure he gives the OEM version and not the fiberglass one.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
>
No:
>
They fit pre-facelift's, no modifications. Just like TRD splitters were made for pre-facelift bumpers but still fit 96+ cars.
QUOTE (whatthe @ Dec 8, 2008 - 5:52 AM)
>^ actually the grooves on the end where it was made for the fitting of the 96+ bumpers fogs. It was made for 96+ so that is what i stated. But if it tickles your fancy to put it on a preface lift bumper like your picture you can.
No:
>
QUOTE
>SS-III (only fits 96-99)
They fit pre-facelift's, no modifications. Just like TRD splitters were made for pre-facelift bumpers but still fit 96+ cars.
I've just added my 'euro' style splitters to give it a subtle aggressive front look.
You can see a parts diagram on my facebook photo album.
You can see a parts diagram on my facebook photo album.
san0.:GT-SS2:.
>
Nice, that looks good. Thanks for the diagram. It looks pretty straight forward, in terms of installing it.
QUOTE (san0 @ Dec 21, 2008 - 12:48 PM)
>I've just added my 'euro' style splitters to give it a subtle aggressive front look.
You can see a parts diagram on my facebook photo album.
You can see a parts diagram on my facebook photo album.
Nice, that looks good. Thanks for the diagram. It looks pretty straight forward, in terms of installing it.
wow so u paid $165 for each front splitter????
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
Just contacted Crisc,
Euro splitters are $140 shipped to the US and are made from fiberglass. They aren't made till you order them.
-TC
Euro splitters are $140 shipped to the US and are made from fiberglass. They aren't made till you order them.
-TC
Live your life for yourself. Don't hold back for anything or anyone.
>
gt_driffter, how did you manage to put these on your car? Did you just bolt them on, i was told ssIII splitters would not fit on a 95 GTS, those are basically theonly splitters i like and was bummed when i heard they wouldn't fit. Did you have to mod them to make them fit or did you just bolt them on?
QUOTE (gt_driFFter @ Dec 8, 2008 - 2:28 AM)
>whatthe, if you're going to list the TRD splitters as fitting all years, you have to say the same about the SSIII's...
gt_driffter, how did you manage to put these on your car? Did you just bolt them on, i was told ssIII splitters would not fit on a 95 GTS, those are basically theonly splitters i like and was bummed when i heard they wouldn't fit. Did you have to mod them to make them fit or did you just bolt them on?
-Protection mode, For when your amp tries to blow its load.1995 Toyota Celica GTS-Daily Driver1999 Chevy Cavalier-Winter Beater1994 Honda Civic CX Hatchback-DeadMy Celica!