WWSideWinder

#31

delusionz Celica has the 1st type (Jap Import same as my Curren) (1996 SS-III)
Nats SS-I or SS-II has the same as you people.

I'll be working on the lighting for that soon (Pink for Nat)

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

parriehunter

#32

my celica has the first one aswell .

---

1994年 トヨタ 神々しいMy FacebookMy BeboQUOTE (loll6g @ Nov 6, 2008 - 5:53 AM)automatics are for lazy ass drivers who jst want there car so that they can look cool

WWSideWinder

#33

parriehunter

if you come up to auckland I can work on your unit (if you want )

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

DEATH

#34

>

QUOTE (WWSideWinder @ Nov 19, 2008 - 4:10 PM)

>parriehunter

if you come up to auckland I can work on your unit (if you want )

OMG - no comment

I wish someone here would be willing to do ours for us. Out of not just curiosity [I am currently in the market for a red converted CC] - how much do you think it would be to source a simple CC unit liek we get here, convert it and ship it to 77040? If the price isn't terribly bad I'd be down to buy one from you [At a profit to you of course]

This post has been edited by DEATH: Nov 20, 2008 - 9:11 AM

---

ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]

GriffGirl

#35

death if I figure out how to do mine successfully, I'll help you out w/yours cuz that's how I roll yo

bmj67

#36

I ordered 50 3mm blue led off of ebay today so im going to start changing the color on my climate control sometime soon

WWSideWinder

#37

Go for it bmj67

Set aside several houres and do it methodicaly and you doo a sweet job.

I love showing off the changes I have made and enthuse outher people to make the chanhes thay have been thinking about.

Suggestions:

1) If you don't have on Get a Multi Meter that can test Diods (i found 1 bad LED in a batch of 10 I bought, with out testing I would have cursed and cursed to try and figuer out what I had done wrong)

2) Post your progress and finished items you will insire outher people.

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

WWSideWinder

#38

New Stuff

This week-end I made 2 changes to my car.

1) I shorted my Auto Gear selector by about an inch thus giving me quicker shifts ( )
2) I have fitted an electric boot/trunk release to go with the key and Cable release that was standard on my car.
With (2) I was hoping to tie it in with my alarm system but sadly I don't think it will work.
Now all I have to do is find a rely good push switch and a good location (thinking of the coved up hole in the dash Drivers Side or the round think next to the driver's vent)
for the boot/trunk release

Suggestion on Locations and types of push switches most welcome.
Also any one know of a Toyota push switch I might use.

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

WWSideWinder

#39

OK More Updates.

Have been wating for the money to do this upgrade to my Ground Wires.

Changed the puny lead going fromt the top of the engin block (under the hoist hook) to new 8 guage wire and also ran a new 8 Guage wire to the new distributer plate (see last photo)



New 4 Guage wire to engin block next to starter motor. 8 Guage wire goes to Distributer plate.



New Distributer for new ground cables.



Now thats thata all sorted on to cleening up the engin bay.

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

delusionz

#40

Sorry to be a party pooper but is there any chance I could reclaim my V12 1400W 4ch amp? My friend has finished rebuilding his badass Honda and now he has his amp and subs back leaving me with no beats

Your ground cables and blue lights look nice now, given this time you've outdone everything I ever wanted to do, nice work

---

Mike W1996 Toyota Celica ST205 GT-FOURGT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC269awhp / 273ft-lbs

delusionz

#41

Btw, You've added an extra positive to the starter motor, Easier starting now?? What about the alternator, Do you plan on adding an extra positive to that?

---

Mike W1996 Toyota Celica ST205 GT-FOURGT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC269awhp / 273ft-lbs

Rusty

#42

I've got one here of the non climate control (not mine, just one I found off the net)

---

ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.

Sick_Puppy

#43

Hey guys, just wanted to say thanks for putting these up- been wanting to do the same to my Curren (I'm in Wellington), and I'd no idea how... This looks great, and it's given me the push to do stuff with mine again! Good luck with the stuff you're doing, and keep us posted!

WWSideWinder

#44

Thank You Sick Puppy

That was the my idea in posting this was to inspire outher people.

If you haev any questions, Please, just ask and the 6gc team (us wallies) will sprinf to your aid.

I have see someone car that has I mos I want to do and I've asked him how he did it.

If there ia anything I can help with just ask.


Delusionz I have, as yet, not added a posotive wire to the starter and Altinator but I will (when I have more money) as I have just purchased a pioneer amp I'll be returning your one back to you as soon as I can.

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

Sick_Puppy

#45

Cheers man, right now I'm in the midst of prepping a pile of stuff to get my car in decent shape again- I've let it go over the years I've had it, so it's due for quite a tidy up as well as a few mods! I'll be changing the gauges and interior lighting to red- I don't want to use LEDs, but finding red caps for bulbs is a PITA, TRD muffler (and possibly some generic headers), replace the broken monsoon visors, repair sunroof, cut and polish and a general detail... but I have a few other things in my life that are taking priority first!

I was considering getting the wiring done, but from this and a few other sites I'm willing to have a crack myself- how much all up do you reckon it would cost for the wiring you've installed/ are installing? Is the one you've installed the one off of trademe? I love the red/blue lights to reflect the change of temperature...

This post has been edited by Sick_Puppy: Jan 25, 2009 - 4:07 AM

WWSideWinder

#46

I got the 8 guage wiering from trade me $30 or so and then bought a 1 meter 4 guage wire fron JB-HIFI for about $12 and the Gold terminal at the end of the 4 guage for about $5.
Battery Terminal cosy me $28 (trademe) for the pair.

Then lost and lots of time to get it installed.

The red/blue in the temprature is 4 red LED's and 5 Blue ones.

As I have written before I'm working on a better solution but I kneed to get out to a scrap yard and get another unit so I can work on it.

Also currently They only work with the lights on and I want to see if I can do a day light and night light situation.

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

WWSideWinder

#47

So things have been a little slow since I helped delusionz rig up the Electric Boot/Trunk and Fuel Releses.

I did the Fuel and Trunk Releces on my car, as well, and I'd been looking for a place to put the switches.
I was also looking for a stelth way to do them So this week end I did the following
(Yes delusionz this is ver 2.0 you saw ver 1.0 with the Big switches.)


Stelth Mode


Switches Revield.


Switches Again


Starting at the Top the switches do the Following.

1st Switch - Enables the Truk Relese (Flick switch to 1 and press the big Siler Button (on dash board)

2ns Switch - Enables the Fuel Release (Flick switch to 1 and press the big Siler Button (on dash board)

3rd Switch - Blue LED Curtesy lighting.

4th Switch - lets me see things on the Head unit - this is also wired to the Handbreak as per safty instructions. (PS this is a secret)

5th Switch - This is a big Secret for now

6th Switch - (Blue momentary) Also Secret for now.

I hope to have more updates soon.
nuge nuge

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

WWSideWinder

#48

My Old sound system Sucked as delusionz wanted his Amp back and the Sub was louzy so I have updated my Sound System

1) Changed the head unit to an Alpine FVA-W306 [4 x 45w output and a rca output + volume control for the sub]


2) Installed 8" 3 way Ulitmate Titanium II Full Range Speakers in the fron doors - Left the 6.5" Pioneers in the Back.



3) Bought a 2nd hand (but good) Pioneer GM-X802 (good for 300W in Mono mode) + (Sitll have to change the lights to Blue) [now delusionz wants to swap amps with me]


4) Bought another 2nd hand Sub (Mutch better than the 1st one)


I just love the Sound in my car now (But I still have to sound insulate it).

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

Cavegod

#49

this is my CC how did you fix the leds in the dial to get them that bright?

delusionz

#50

Hey man, Can you do my (2x) CC units?

PS. All the bulbs are burnt out in mine, however I don't think it's the bulbs, since they went out in rows? 1st the bottom row, then the middle row, now everything.

I finally finished the cold air intake on the SS-III Celica, man it goes so hard! I'm getting my exhaust redone and my wastegate actuator sorted on Wednesday. I like 18psi but it's a little more useful at 7000rpm as opposed to 5000rpm when its got a fuel cut

---

Mike W1996 Toyota Celica ST205 GT-FOURGT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC269awhp / 273ft-lbs

Cavegod

#51

what you want doing??

freddy121389

#52

wtf the PRNDL is in the gauge cluster on euro cars?

---

Representing the Convertible Crew since 2008

Cavegod

#53

prndl??

oh for the auto gearbox

WWSideWinder

#54

>

QUOTE (Cavegod @ Aug 15, 2009 - 11:45 PM)

>

this is my CC how did you fix the leds in the dial to get them that bright?

This is still a work in Progress.....

So Far I have 4 red leds and 5 Blue but I'm looking at 3mm leds to get the best look.

As to How
1) I removed the Clear plastic the normaly surrounds the temperature knob.
2) I solderd up some LEd and placed them inside
3) Drilled a few holes to get the wires out.
4) Connected up the wires.
5) LOL above took me 3 weeks to get to this stage but now it should be quicker.

As I have sead this is a work in Progress and I'm hoping to have a better solution soon
The Problem is that I have to use the Car every day so I cant leve the AC unit out to work on and it's getting a bit batterd with all the in and out stuff.

I will make all plans, mesurements and componets avalable to all at 6GC as soon as I can.

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

Cavegod

#55

ah i did the same , i also fitted an led in each button to light them up at night, i have now connected it to the dash dimmer as it was a bit bright at night!

WWSideWinder

#56

>

QUOTE (delusionz @ Aug 15, 2009 - 11:56 PM)

>Hey man, Can you do my (2x) CC units?

PS. All the bulbs are burnt out in mine, however I don't think it's the bulbs, since they went out in rows? 1st the bottom row, then the middle row, now everything.

I finally finished the cold air intake on the SS-III Celica, man it goes so hard! I'm getting my exhaust redone and my wastegate actuator sorted on Wednesday. I like 18psi but it's a little more useful at 7000rpm as opposed to 5000rpm when its got a fuel cut

Long time no see mate....

How is the boot and fuel release going (Still love playing with the new switches I installed )

If you can drop one off and do with out if for about 2 weeks I can do it (over worked at work BUT hay I have a job so not all bad )

I can then re work all the LED's and do a better job of the Temp scale.

Still got to take the GT4 out for a decent spin.... soon

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

WWSideWinder

#57

>

QUOTE (freddy121389 @ Aug 16, 2009 - 5:41 AM)

>wtf the PRNDL is in the gauge cluster on euro cars?

I have green ones in the guage cluster

Note the Green P and Blue RND2L




And next to the Shifter on the center console Blue - But it has stoped working (cheap LED is broken - 1 sunny non work week end and it will be great again.



This is a Jap import into New Zealand not a euro car euro cars may not have this.

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

delusionz

#58

Hows progress?

Hey do u have a star screw driver with a dot in the middle? Sorry I can't explain it any better, but those screws are on the seatbelt latch. The flashing light on the dash that tells u that you aren't wearing your seatbelt has never worked in my st205.

i had my factory boost controller capped off and it still hasnt fixed my overboost problem I may need to install an intake restricter or something

---

Mike W1996 Toyota Celica ST205 GT-FOURGT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC269awhp / 273ft-lbs

WWSideWinder

#59

HI delusionz

I can get one from work if you want...

Could do with your help I'm just finishing installing guages on my dash.

Now for the hard part installing the adapter plate onto the block.

When are you going to drop off the AC unites for me to work on?

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"

WWSideWinder

#60

Latest Updates.......


Aftermarket Oil Press, Oil Temp and Water Temp Guages







Unfortinatly they are only in White but I'm looking into changing to blue.


Now a lot of People will go "What a wast his engine is stock" BUT

I love my Guages and have been wanting to get these for a long time.
I have fond out that on my daily trip to work and back only in the last 5 - 10% is my oil temprature in the correct place (90 to 95 Dec C).
So now I know when to floor the accelareter and when not to.

In the next few days I'll poost more pictures of the sender units. (Something I was looking for before I installed)

---

WWSideWinder - 1996 - 3S-FE - Auckland New Zealand~ signature made by jaws4god ~Have a look at my thread for updates on my progress."http://www.6gc.net/forums/index.php?showtopic=63338&hl=0"