Over 1M Posts • 84K Topics • 9K Authors

Summer meet in the 403 - 6G Celicas Forums

Topic #58088 110 posts Started by 6gsillyca
>
QUOTE (KAOS @ Aug 28, 2008 - 11:50 AM) *
>No we were face to face - you were headed towards Deerfoot and I was in the turning lane to go up the Shaganappi hill...

Usually I notice other celicas if not always, my bad man, I'll be sure to keep an eye out for the yelli celli now.


>
QUOTE (WALKER @ Aug 28, 2008 - 11:53 AM) *
>>
QUOTE (dnyluong @ Aug 28, 2008 - 10:19 AM) *
>>
QUOTE (6gsillyca @ Aug 26, 2008 - 1:46 PM) *
>Yea, its been a few months since I've had a chance to browse the forums. I haven't had a whole lot of free time lately, like I said I hadn't even had the chance to go through my tank of gas from last winters storage. Right now I'm in the process of re-doing the brakes because they squal like a banshee. I guess I didn't put enough anti-squeal spray on. The 2 hour job it should have been has taken me almost 2 months, and I'm only done half the car...


Hey David, mind if i swing by so we could do my breaks too?
They're squealing worse then banshee's it's ****ing unbearable man.


Sometime in September we should set up a day and go to Jeremy's and we can all mess around with your brakes!


haha sounds perfect, she's @ the mechs right now if she still squeals like a pig then we'll call in a meeting for my lameass brakes T_T

This post has been edited by dnyluong: Aug 28, 2008 - 12:48 PM

403
>
QUOTE (WALKER @ Aug 28, 2008 - 10:53 AM) *
>>
QUOTE (dnyluong @ Aug 28, 2008 - 10:19 AM) *
>>
QUOTE (6gsillyca @ Aug 26, 2008 - 1:46 PM) *
>Yea, its been a few months since I've had a chance to browse the forums. I haven't had a whole lot of free time lately, like I said I hadn't even had the chance to go through my tank of gas from last winters storage. Right now I'm in the process of re-doing the brakes because they squal like a banshee. I guess I didn't put enough anti-squeal spray on. The 2 hour job it should have been has taken me almost 2 months, and I'm only done half the car...


Hey David, mind if i swing by so we could do my breaks too?
They're squealing worse then banshee's it's ****ing unbearable man.


Sometime in September we should set up a day and go to Jeremy's and we can all mess around with your brakes!


Wurrd - I gots airtools! lol

KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
So I just got off the phone with my mech, and he's up for doing the swap for me, but he said that I should work on finding a better gearbox first, so keep your eyes peeled for parts cars for me guys! Hit me up with PM or just email straight to me @ dannyluong1@hotmail.com any help would be appreciated guys

403
Danny, when are you going to be getting your car back? I don't know about going all the way down to David's/Jeremy's to do brakes, but if you want to come up the hill we can do/finish them at my place.

Actually I need to do the brakes on my RSX too, so if anyone has a free day, let me know and maybe we can get some beer/pizza/brakes/rockband/cod4 goin.

This post has been edited by 6gsillyca: Aug 28, 2008 - 5:09 PM
>
QUOTE (6gsillyca @ Aug 28, 2008 - 4:02 PM) *
>Danny, when are you going to be getting your car back? I don't know about going all the way down to David's/Jeremy's to do brakes, but if you want to come up the hill we can do/finish them at my place.


Jeremy's in Airdrie. We can go anywhere though. Could also bring tools to your place.

GT4WRC.COM
I know he is in Airdrie, but my car is up on stands right now, and I don't have driving insurance. Danny lives down the hill from my place.

I have a bunch of tools, just nothing air, all my tools are hand/cordless.

The only thing I can think of that we might need if we are going to be working 2 sets of cars, is another pair of stands. I only have 3 pairs.

This post has been edited by 6gsillyca: Aug 28, 2008 - 5:19 PM
Man - that air ratchet + gun saved us a shyte load of labour in the past couple of mod days... lol

But I got a sweet breaker bar I can bring now! LOL!

KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
I just got her back, she doesn't squeal like banshee anymore, but it's still a bit there, I need new axles now too ahah, there's something messed with mine, you guys know if toyotaworld has these parts? I'm just gonna go check now, haha corey, if you need me just send me a text

403
New axles? Front or rear? You can get these at NAPA/auto value for pretty cheap. It would probably be a bit quicker than ordering off toyota world.

Would either David or Jeremy be interested in coming up North to do some brakes (and axles if we get them) in the next week or so?
>
QUOTE (6gsillyca @ Aug 29, 2008 - 11:22 AM) *
>New axles? Front or rear? You can get these at NAPA/auto value for pretty cheap. It would probably be a bit quicker than ordering off toyota world.

Would either David or Jeremy be interested in coming up North to do some brakes (and axles if we get them) in the next week or so?


I would be interested - just have to run it by the "boss" first to see if we have anything planned for whatever day you'd like to meet.

KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
>
QUOTE (KAOS @ Aug 29, 2008 - 11:29 AM) *
>>
QUOTE (6gsillyca @ Aug 29, 2008 - 11:22 AM) *
>New axles? Front or rear? You can get these at NAPA/auto value for pretty cheap. It would probably be a bit quicker than ordering off toyota world.

Would either David or Jeremy be interested in coming up North to do some brakes (and axles if we get them) in the next week or so?


I would be interested - just have to run it by the "boss" first to see if we have anything planned for whatever day you'd like to meet.


I would be interested in helping out as well. Just let me know what day you are thinking and I will check my schedule.

GT4WRC.COM
What days do you guys have off/available?

This post has been edited by 6gsillyca: Sep 2, 2008 - 5:20 PM
How does this weekend sound? Would either Saturday or Sunday work for anyone?
>
QUOTE (6gsillyca @ Sep 2, 2008 - 4:21 PM) *
>How does this weekend sound? Would either Saturday or Sunday work for anyone?


This weekend won't work for me. I probably am out until the end of the month now. Sorry guys.

GT4WRC.COM
>
QUOTE (WALKER @ Aug 29, 2008 - 1:05 PM) *
>>
QUOTE (KAOS @ Aug 29, 2008 - 11:29 AM) *
>>
QUOTE (6gsillyca @ Aug 29, 2008 - 11:22 AM) *
>New axles? Front or rear? You can get these at NAPA/auto value for pretty cheap. It would probably be a bit quicker than ordering off toyota world.

Would either David or Jeremy be interested in coming up North to do some brakes (and axles if we get them) in the next week or so?


I would be interested - just have to run it by the "boss" first to see if we have anything planned for whatever day you'd like to meet.


I would be interested in helping out as well. Just let me know what day you are thinking and I will check my schedule.


got a number you could hook me up with? I need new front axles lol, they make clunking noises when i turn right, it's ****ing horrible. I've been thinking about selling her and grabbing a 7th gen, but I know it just wouldn't be the same, also my wheel allignment is a bit messed now, ugh, hopefully i'll get a new job soon and be able to start repairs on this beast

403
hey guys there's a year end toyota meet for beyond anyone interested in coming its on October 12th I think or 14th k

403
Are you going Danny?

KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
I think so, I want to, but i wanna roll with the 6gc's man not a massive amount of MR2's LOL

403
Can you copy that link to the beyond forums - I went there today to read up on details but couldn't find a Calgary Toyota meet...

I think the majority of us should do this as a "end of the season" meet too... might be fun! I wouldn't mind getting some photos with some MR2's, Supra's, etc... that'd be BA.

Who's all in!?

KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|