We have map sensors too but they are 1 bar, so they read -15 vacume to 0 pressure. Thats why we need a 2 bar to be able to read till 15psi from -15psi.

well what i would have to do is send him a flange that matches my turbo and if he could copy your dp and just use my flange that would be awsome

if its a good price i might be down for this too.

ok i'll speak to him.

yes, i have 2 2BAR map sensor at the minute.

woop woop.

Car is all finished, and mapped. I'm getting 11-13 AFR on boost and 14's on low boost. I did all this with wideband, a trusty passenger friend (and note taker) and on the road.

What I'm not sure off is my fuel pressure. I have 2bar map sensor and adjustable FPR.

At present, on idle, and vacuum hose connected, fuel pressure is just under 2bar. I also have Walbro fuel pump fitted (bit noisy isnt it??) ha ah.

Gonna fit my boost guage today.

Do you have a wastegate?

yes, it's an internal wastegate