Im about to order a short shifter, the 7th gen ones. but i wanted to see first how short the shaft actualy is? Anyone got a pic of their car with a 7th gen short shifter? thanks
Short shifter - 6G Celicas Forums
before:
after
after
~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207
hmm i see a diff but it aint that much shorter......which one did you like better jaws?
>
QUOTE(illneversellmycelli @ Feb 29, 2008 - 9:36 PM) [snapback]647837[/snapback]
>
hmm i see a diff but it aint that much shorter......which one did you like better jaws?
hmm i see a diff but it aint that much shorter......which one did you like better jaws?
Short shifters are sweet but I just put on a razo shift knob the long thin one and the way it sits on the arm makes it feel like a shorter throw. I love it..
- Matt
- Matt
>
Remind me about that - I have something you may like.
QUOTE(politicsareevil @ Feb 29, 2008 - 8:45 PM) [snapback]647916[/snapback]
>
Short shifters are sweet but I just put on a razo shift knob the long thin one and the way it sits on the arm makes it feel like a shorter throw. I love it..
- Matt
Short shifters are sweet but I just put on a razo shift knob the long thin one and the way it sits on the arm makes it feel like a shorter throw. I love it..
- Matt
Remind me about that - I have something you may like.
ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
>
There is a difference between a short shifter and a short throw shifter, if you want a short shift cut your shaft and reweld it.
If you want a short throw weld any type of extension to the underside of the shifter. The longer the extension the shorter the throw.
QUOTE(mikecelica @ Feb 28, 2008 - 11:10 PM) [snapback]647495[/snapback]
>
Im about to order a short shifter, the 7th gen ones. but i wanted to see first how short the shaft actualy is? Anyone got a pic of their car with a 7th gen short shifter? thanks
Im about to order a short shifter, the 7th gen ones. but i wanted to see first how short the shaft actualy is? Anyone got a pic of their car with a 7th gen short shifter? thanks
There is a difference between a short shifter and a short throw shifter, if you want a short shift cut your shaft and reweld it.
If you want a short throw weld any type of extension to the underside of the shifter. The longer the extension the shorter the throw.
>
maybe the angle of the picture doesn't really show but its a lot shorter (height)
it does have a shorter throw and is nice. Def goes into gears faster and smoother.
QUOTE(illneversellmycelli @ Feb 29, 2008 - 9:36 PM) [snapback]647837[/snapback]
>
hmm i see a diff but it aint that much shorter......which one did you like better jaws?
hmm i see a diff but it aint that much shorter......which one did you like better jaws?
maybe the angle of the picture doesn't really show but its a lot shorter (height)
it does have a shorter throw and is nice. Def goes into gears faster and smoother.
~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207
>
X2 thats exactly what I did. I bought a 7gc short throw shifter and cut the bottom part off and welded it to the bottom of my 6gc shifter. Much better and accurate shifting experience.
QUOTE(bootslimo @ Feb 29, 2008 - 10:21 PM) [snapback]647946[/snapback]
>
>
There is a difference between a short shifter and a short throw shifter, if you want a short shift cut your shaft and reweld it.
If you want a short throw weld any type of extension to the underside of the shifter. The longer the extension the shorter the throw.
>
QUOTE(mikecelica @ Feb 28, 2008 - 11:10 PM) [snapback]647495[/snapback]
>
Im about to order a short shifter, the 7th gen ones. but i wanted to see first how short the shaft actualy is? Anyone got a pic of their car with a 7th gen short shifter? thanks
Im about to order a short shifter, the 7th gen ones. but i wanted to see first how short the shaft actualy is? Anyone got a pic of their car with a 7th gen short shifter? thanks
There is a difference between a short shifter and a short throw shifter, if you want a short shift cut your shaft and reweld it.
If you want a short throw weld any type of extension to the underside of the shifter. The longer the extension the shorter the throw.
X2 thats exactly what I did. I bought a 7gc short throw shifter and cut the bottom part off and welded it to the bottom of my 6gc shifter. Much better and accurate shifting experience.
3sgteing...burns twice as bright, lasts half as long."The weight of the world is love. Under the burden of solitude, under the burden of dissatisfaction."-Allen Ginsberg-
Concerning the short shifters, has anyone ever tried one of these:
http://cgi.ebay.com/ebaymotors/00-04-Toyot...sspagenameZWDVW
I'm looking on Ebay, and all these 7th gen ones look the exact same. Will they work? And how well made are they?
-Matt
http://cgi.ebay.com/ebaymotors/00-04-Toyot...sspagenameZWDVW
I'm looking on Ebay, and all these 7th gen ones look the exact same. Will they work? And how well made are they?
-Matt
i have a 7th gen, looks like that too...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Well, I don't have any 7th gen's
BUT here's a pic when i took out my stock shifter comparing it with a 6th gen TWM short-shifter.
BUT here's a pic when i took out my stock shifter comparing it with a 6th gen TWM short-shifter.
Heres what would probably do best. Cut a link out of the top portion and reweld a bit shorter. Cut the bottom and add a bit of length to it... should work yes?
- Matt
- Matt
>
i believe there is a how to about that, but it would be easier to buy
QUOTE(politicsareevil @ Mar 12, 2008 - 2:03 AM) [snapback]652500[/snapback]
>
Heres what would probably do best. Cut a link out of the top portion and reweld a bit shorter. Cut the bottom and add a bit of length to it... should work yes?
- Matt
Heres what would probably do best. Cut a link out of the top portion and reweld a bit shorter. Cut the bottom and add a bit of length to it... should work yes?
- Matt
i believe there is a how to about that, but it would be easier to buy
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
So I could buy the shifter I linked to on Ebay and it would work just fine?
How do you take out the stock piece for that in the first place?
-Matt
How do you take out the stock piece for that in the first place?
-Matt
^ yeah, that ebay ss will work just fine. as far as quality, its just a metal stick. not much can go wrong. best 40 bucks you can spend. there's a pdf file on how to install the twm ss. same exact instructions. someone should have it saved on their computer.
ss-iii splitters and 404 skirts areon. which means i need to update my sig.
the short throw won't look all that much shorter because you have to put the assembly on risers so you don't hit on the bottom. it's designed shorten the throw, not necessarily the height of the shifter. if you want a short throw/short shift stick, get a cheap ebay one, cut a bit off the top portion then weld it back together. now you have a shorter throw (distance between gears when shifting) and the shift stick now looks shorter.
all i can say is i love mine and most people who have been in my car have made comments about it. best 30 bucks spent IMO.
hey jaws, i used to have that same shift boot (except red) on my old 97 LE. i do miss that car sometimes.
This post has been edited by goferris: Mar 13, 2008 - 1:03 AM
all i can say is i love mine and most people who have been in my car have made comments about it. best 30 bucks spent IMO.
hey jaws, i used to have that same shift boot (except red) on my old 97 LE. i do miss that car sometimes.
This post has been edited by goferris: Mar 13, 2008 - 1:03 AM
Call me a traitor! See if I care. ;)