Will rearview mirrors from '93-97 Corollas fit our cars? Somebody please confirm this. I need one asap!
other parts from other gens or other cars? - 6G Celicas Forums
>
tried that it doesn't bolt setup is different but if u did get them to work let me know cause i had to buy mine from yoter and it was pricy
QUOTE(cjh4l22 @ Feb 13, 2008 - 4:12 PM) [snapback]641071[/snapback]
>
90-93gts fogs are same fogs found in 96-99s?
90-93gts fogs are same fogs found in 96-99s?
tried that it doesn't bolt setup is different but if u did get them to work let me know cause i had to buy mine from yoter and it was pricy
pretty much any toyota shiftknob will fit on a stick celica. I was driving a 89 Trecel yesterday at work and they have an OEM ball shiftknob thats extreamly similar to the ball style TRD knob.
dont know if this is alreaady covered but anyone looking for a stage 2 clutch, you can get one thats for these cars from exedy:
Part # : 16950
94-99 TOYOTA CELICA 1.8 7AFE/1ZZ-FE
00-05 TOYOTA CELICA GTS 1.8 1ZZ-FE/2ZZ-GE VVLT-1
93-97 TOYOTA COROLLA 1.8 7A-FE
03-06 TOYOTA MATRIX 1.8 1ZZ-FE/2ZZ-GE
86-89 TOYOTA MR-2 1.6 4AGE
00-05 TOYOTA MR-S SPYDER 1.8 1ZZ-FE
03-06 SCION XA
03-06SCION XB
Part # : 16950
94-99 TOYOTA CELICA 1.8 7AFE/1ZZ-FE
00-05 TOYOTA CELICA GTS 1.8 1ZZ-FE/2ZZ-GE VVLT-1
93-97 TOYOTA COROLLA 1.8 7A-FE
03-06 TOYOTA MATRIX 1.8 1ZZ-FE/2ZZ-GE
86-89 TOYOTA MR-2 1.6 4AGE
00-05 TOYOTA MR-S SPYDER 1.8 1ZZ-FE
03-06 SCION XA
03-06SCION XB
i forgot to add that rear ash trays off early 90s *like 92, 93 etc* corolla's will fit. I broke mine and grabbed on off a 94 corolla 4dr and it fit fine.
>
So the clutches from this list of cars are all the same?
QUOTE(mikecelica @ Mar 2, 2008 - 5:56 PM) [snapback]648438[/snapback]
>
dont know if this is alreaady covered but anyone looking for a stage 2 clutch, you can get one thats for these cars from exedy:
Part # : 16950
94-99 TOYOTA CELICA 1.8 7AFE/1ZZ-FE
00-05 TOYOTA CELICA GTS 1.8 1ZZ-FE/2ZZ-GE VVLT-1
93-97 TOYOTA COROLLA 1.8 7A-FE
03-06 TOYOTA MATRIX 1.8 1ZZ-FE/2ZZ-GE
86-89 TOYOTA MR-2 1.6 4AGE
00-05 TOYOTA MR-S SPYDER 1.8 1ZZ-FE
03-06 SCION XA
03-06SCION XB
dont know if this is alreaady covered but anyone looking for a stage 2 clutch, you can get one thats for these cars from exedy:
Part # : 16950
94-99 TOYOTA CELICA 1.8 7AFE/1ZZ-FE
00-05 TOYOTA CELICA GTS 1.8 1ZZ-FE/2ZZ-GE VVLT-1
93-97 TOYOTA COROLLA 1.8 7A-FE
03-06 TOYOTA MATRIX 1.8 1ZZ-FE/2ZZ-GE
86-89 TOYOTA MR-2 1.6 4AGE
00-05 TOYOTA MR-S SPYDER 1.8 1ZZ-FE
03-06 SCION XA
03-06SCION XB
So the clutches from this list of cars are all the same?
the stage 2 from EXEDY one clutch fits all i dont know if oem clutches are one fits all or other companies
>
rsx is 5x114
QUOTE(goferris @ Feb 19, 2008 - 12:12 AM) [snapback]643048[/snapback]
>
from what i have read RX-7 injectors
corolla steering wheel (hell most toyota steering wheels LOL)
camry motor
mr2 motor parts
mr2 shift knobs
any 5x100 bolt pattern wheels (jetta, tc, rsx, 7gc, i can go on for a while
)
did anyone ever find out if the scion pioneer headunit would work in our car? i thought someone was trying it out.
from what i have read RX-7 injectors
corolla steering wheel (hell most toyota steering wheels LOL)
camry motor
mr2 motor parts
mr2 shift knobs
any 5x100 bolt pattern wheels (jetta, tc, rsx, 7gc, i can go on for a while
)did anyone ever find out if the scion pioneer headunit would work in our car? i thought someone was trying it out.
rsx is 5x114
Gen 7 M-sport alloys fit and look really nice
I have heard the 4AFE head will fit the 7AFE engine block, but i'm not sure about the waterways, some may not line up properly?
I have heard the 4AFE head will fit the 7AFE engine block, but i'm not sure about the waterways, some may not line up properly?
>
I believe the ST185 fronts only work the the ST (could be wrong)
and since the GT rear fits on the ST (hubs/bearings are the same) what makes you say the St205 is GT only rear?
QUOTE(azian_advanced @ Feb 13, 2008 - 2:14 PM) [snapback]641110[/snapback]
>
st205 rear brake assembly (for GT only)
st185 'dual piston' front brake assembly
st205 rear brake assembly (for GT only)
st185 'dual piston' front brake assembly
I believe the ST185 fronts only work the the ST (could be wrong)
and since the GT rear fits on the ST (hubs/bearings are the same) what makes you say the St205 is GT only rear?
From what other car does a gas tank fit a 6gc?
>
my bad.. i was wrong. totally forgot about the fact the gt discs can be swapped into the st.
i also looked into this a bit more, the st205 rear brake assembly won't fit in either the gt or st. the knuckle on the gt-four is different (from the awd of course), and after personally trying a set of superstrut rear shocks (the bolt pattern is narrower, only the springs and mounts work which i'm using now) and a few statements from another member explaing the e-brake components being totally different too.
This post has been edited by azian_advanced: Mar 16, 2008 - 10:39 PM
QUOTE(playr158 @ Mar 11, 2008 - 9:47 AM) [snapback]651923[/snapback]
>
>
I believe the ST185 fronts only work the the ST (could be wrong)
and since the GT rear fits on the ST (hubs/bearings are the same) what makes you say the St205 is GT only rear?
>
QUOTE(azian_advanced @ Feb 13, 2008 - 2:14 PM) [snapback]641110[/snapback]
>
st205 rear brake assembly (for GT only)
st185 'dual piston' front brake assembly
st205 rear brake assembly (for GT only)
st185 'dual piston' front brake assembly
I believe the ST185 fronts only work the the ST (could be wrong)
and since the GT rear fits on the ST (hubs/bearings are the same) what makes you say the St205 is GT only rear?
my bad.. i was wrong. totally forgot about the fact the gt discs can be swapped into the st.
i also looked into this a bit more, the st205 rear brake assembly won't fit in either the gt or st. the knuckle on the gt-four is different (from the awd of course), and after personally trying a set of superstrut rear shocks (the bolt pattern is narrower, only the springs and mounts work which i'm using now) and a few statements from another member explaing the e-brake components being totally different too.
This post has been edited by azian_advanced: Mar 16, 2008 - 10:39 PM
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Time to revive an old thread...
So, as most of us know, the front strut bar is the same as the universal 94-99 Dodge Neon. What about the rear though?
Ebay Listing
This would be pretty important for some of the users here since there are a bunch of Ebay sellers that will sell BOTH (front and rear) for $20.
-TC
This post has been edited by razor7: Oct 9, 2008 - 6:52 PM
So, as most of us know, the front strut bar is the same as the universal 94-99 Dodge Neon. What about the rear though?
Ebay Listing
This would be pretty important for some of the users here since there are a bunch of Ebay sellers that will sell BOTH (front and rear) for $20.
-TC
This post has been edited by razor7: Oct 9, 2008 - 6:52 PM
Live your life for yourself. Don't hold back for anything or anyone.
>
thank you i agree
lets get some more parts up here!!
QUOTE (tin_foil @ Feb 21, 2008 - 2:12 AM) 
>stop hijacking the thread. I wanna know about more parts; this is one of the best threads I've ever seen on the 6gc forums.
I wanna know about more parts; this is one of the best threads I've ever seen on the 6gc forums.thank you i agree
lets get some more parts up here!!
proud =3sgte SWAPPED= '95 Celica ST owner [calling it the GT2 or half-trac]309,000 miles n' ....dead-> ALIVE AGAIN!! ~14,000 miles driven
what abt 7gen front brake pads fit ST202 3SFE?
I heard that a 2JZ bolts right up to the celica 
Now SR powered
>
So 5th gen shocks/springs work, can someone confirm this?
-Matt
QUOTE (azian_advanced @ Feb 13, 2008 - 1:14 PM)
>5th gen shocks and rear brake pads (except alltracs)
4th & 5th gen springs, struts and topmounts
4th & 5th gen springs, struts and topmounts
So 5th gen shocks/springs work, can someone confirm this?
-Matt
PUt a 2JZ-GTe (supra motor) in the celica
its possible and it will run like a beast
its possible and it will run like a beast
Anything is possible, its just how deep your pockets go...
--------------------------------私は銀行に漂う,TRDInspired
>
try the paseo shift knob, its better!!!1
QUOTE (Valo666 @ Feb 25, 2008 - 12:26 AM)
>pretty much any toyota shiftknob will fit on a stick celica. I was driving a 89 Trecel yesterday at work and they have an OEM ball shiftknob thats extreamly similar to the ball style TRD knob.
try the paseo shift knob, its better!!!1
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
has anybody tried the 7th gen strut bars, I mean is the lenght the same. Maybe a different hole pattern?
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
>
proof please!!!
QUOTE (razor7 @ Oct 9, 2008 - 7:47 PM)
>Time to revive an old thread...
So, as most of us know, the front strut bar is the same as the universal 94-99 Dodge Neon. What about the rear though?
Ebay Listing
This would be pretty important for some of the users here since there are a bunch of Ebay sellers that will sell BOTH (front and rear) for $20.
-TC
So, as most of us know, the front strut bar is the same as the universal 94-99 Dodge Neon. What about the rear though?
Ebay Listing
This would be pretty important for some of the users here since there are a bunch of Ebay sellers that will sell BOTH (front and rear) for $20.
-TC
proof please!!!
QUOTE (Galcobar @ Oct 15, 2008 - 2:44 AM)You want power but have no money. That's a problem.Cheap. Reliable. Fast. Pick two.
>
I'm actually going to get one and try it out. Doesn't seem like anyone has any info on it, and since it's so cheap, I can find another use for it if it doesn't work.
If anyone has tried it already, please chime in. I'd love to hear what you have to say!
-TC
QUOTE (easternpiro1 @ Oct 13, 2008 - 10:30 PM)
>>
proof please!!!
QUOTE (razor7 @ Oct 9, 2008 - 7:47 PM)
>Time to revive an old thread...
So, as most of us know, the front strut bar is the same as the universal 94-99 Dodge Neon. What about the rear though?
Ebay Listing
This would be pretty important for some of the users here since there are a bunch of Ebay sellers that will sell BOTH (front and rear) for $20.
-TC
So, as most of us know, the front strut bar is the same as the universal 94-99 Dodge Neon. What about the rear though?
Ebay Listing
This would be pretty important for some of the users here since there are a bunch of Ebay sellers that will sell BOTH (front and rear) for $20.
-TC
proof please!!!
I'm actually going to get one and try it out. Doesn't seem like anyone has any info on it, and since it's so cheap, I can find another use for it if it doesn't work.
If anyone has tried it already, please chime in. I'd love to hear what you have to say!
-TC
Live your life for yourself. Don't hold back for anything or anyone.
>
Different hole pattern. Am currently in the process of modding one for my own car
QUOTE (njccmd2002 @ Oct 12, 2008 - 2:29 PM)
>has anybody tried the 7th gen strut bars, I mean is the lenght the same. Maybe a different hole pattern?
Different hole pattern. Am currently in the process of modding one for my own car
what about length, holes can be drilled!
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
>
Yeah, that's my main concern. I have no issue re-drilling the holes, already did it for the front one! :-D
-TC
QUOTE (njccmd2002 @ Oct 26, 2008 - 1:26 PM)
>what about length, holes can be drilled!
Yeah, that's my main concern. I have no issue re-drilling the holes, already did it for the front one! :-D
-TC
Live your life for yourself. Don't hold back for anything or anyone.
>
i put my 6th gen shocks on my dad's old 5th gen. so 5th gen shocks should technically work on a 6th gen.
QUOTE (GotToyota @ Oct 11, 2008 - 1:14 AM)
>>
So 5th gen shocks/springs work, can someone confirm this?
-Matt
QUOTE (azian_advanced @ Feb 13, 2008 - 1:14 PM)
>5th gen shocks and rear brake pads (except alltracs)
4th & 5th gen springs, struts and topmounts
4th & 5th gen springs, struts and topmounts
So 5th gen shocks/springs work, can someone confirm this?
-Matt
i put my 6th gen shocks on my dad's old 5th gen. so 5th gen shocks should technically work on a 6th gen.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
>
your dad drives a 5th gen? AWWSOMEE
QUOTE (azian_advanced @ Oct 27, 2008 - 1:50 PM)
>>
i put my 6th gen shocks on my dad's old 5th gen. so 5th gen shocks should technically work on a 6th gen.
QUOTE (GotToyota @ Oct 11, 2008 - 1:14 AM)
>>
So 5th gen shocks/springs work, can someone confirm this?
-Matt
QUOTE (azian_advanced @ Feb 13, 2008 - 1:14 PM)
>5th gen shocks and rear brake pads (except alltracs)
4th & 5th gen springs, struts and topmounts
4th & 5th gen springs, struts and topmounts
So 5th gen shocks/springs work, can someone confirm this?
-Matt
i put my 6th gen shocks on my dad's old 5th gen. so 5th gen shocks should technically work on a 6th gen.
your dad drives a 5th gen? AWWSOMEE
[b]My Build Thread|Flickr|My Blog
>
so did you fit the 7th gen bar for the front?
QUOTE (razor7 @ Oct 26, 2008 - 10:08 PM)
>>
Yeah, that's my main concern. I have no issue re-drilling the holes, already did it for the front one! :-D
-TC
QUOTE (njccmd2002 @ Oct 26, 2008 - 1:26 PM)
>what about length, holes can be drilled!
Yeah, that's my main concern. I have no issue re-drilling the holes, already did it for the front one! :-D
-TC
so did you fit the 7th gen bar for the front?
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
6th gen convertible inside rearview mirror is same as 90s Corolla and Geo Prizm. Identical. Can't speak for coupe and hatch cars.