What parts i need to make my 3gen 3sge to beams?
Or its better to swap?
Or its better to swap?
Greets from GermanyICQ: 270423730
Greets from GermanyICQ: 270423730
Parts needed to make a beams 3sge? - 6G Celicas Forums
Greets from GermanyICQ: 270423730
>
I did this swap 4 months ago ...
what you need is :
exhaust Y pipe
and top of air-box ..
if you dont have with beams engine You need MAF sesnsor
swap is PnP ......no problems
1. Air intake + MAF sensor (beams -> right )
2. Y-pipe (beams bellow)
3. You need cut and make longer wiring (about 1m ...RHD to LHD conversion)
(I will make photo later)
I see You are located in Germany ... Im in Brno CZ
This post has been edited by pasqual: Jan 20, 2008 - 12:21 PM
QUOTE(GER-CELI @ Jan 20, 2008 - 6:44 AM) [snapback]632544[/snapback]
>
What parts i need to make my 3gen 3sge to beams?
Or its better to swap?
What parts i need to make my 3gen 3sge to beams?
Or its better to swap?
I did this swap 4 months ago ...
what you need is :
exhaust Y pipe
and top of air-box ..
if you dont have with beams engine You need MAF sesnsor
swap is PnP ......no problems
1. Air intake + MAF sensor (beams -> right )
2. Y-pipe (beams bellow)
3. You need cut and make longer wiring (about 1m ...RHD to LHD conversion)
(I will make photo later)
I see You are located in Germany ... Im in Brno CZ
This post has been edited by pasqual: Jan 20, 2008 - 12:21 PM
BEAMS swaped .......
no more?
camshafts....
did u feel the difference.
u cam efrom poland, where u get the parts , and how expensive?
camshafts....
did u feel the difference.
u cam efrom poland, where u get the parts , and how expensive?
Greets from GermanyICQ: 270423730
>
You cant just swap in some parts designed for the BEAMS, you need the ENTIRE engine.
QUOTE(GER-CELI @ Jan 20, 2008 - 6:16 PM) [snapback]632596[/snapback]
>
no more?
camshafts....
did u feel the difference.
u cam efrom poland, where u get the parts , and how expensive?
no more?
camshafts....
did u feel the difference.
u cam efrom poland, where u get the parts , and how expensive?
You cant just swap in some parts designed for the BEAMS, you need the ENTIRE engine.
JDM Powerplant installed, BPU coming very soon!
>
no more
parts needed ........ read my prev post .. I edited it ...
camshaft are ok and will fit beams gearbox ....
difference is BIG LSD power etc .....
I get parts from ASO not so much expensive ... I will provide You later ...
so Do you have Your beams ???? or just thinking about buy it ???
I have only one problem (I dont have time to fix it ) old RPM gauge dont want work .... with beams (diff signal ... )
QUOTE(GER-CELI @ Jan 20, 2008 - 12:16 PM) [snapback]632596[/snapback]
>
no more?
camshafts....
did u feel the difference.
u cam efrom poland, where u get the parts , and how expensive?
no more?
camshafts....
did u feel the difference.
u cam efrom poland, where u get the parts , and how expensive?
no more
parts needed ........ read my prev post .. I edited it ...camshaft are ok and will fit beams gearbox ....
difference is BIG
LSD power etc .....I get parts from ASO not so much expensive ... I will provide You later ...
so Do you have Your beams ???? or just thinking about buy it ???
I have only one problem (I dont have time to fix it ) old RPM gauge dont want work .... with beams (diff signal ... )
BEAMS swaped .......
before my corolla was crashed, i´d ordered an 4efte, but i dont need it 
This importeur does have an Beams, grey or red top.
now i had to decide
This importeur does have an Beams, grey or red top.
now i had to decide
Greets from GermanyICQ: 270423730
>
or maybe swap 3s-gte rev3 from MR2 (LSD ) .. more complicated but .... more power ..turbo etc
QUOTE(GER-CELI @ Jan 20, 2008 - 12:39 PM) [snapback]632606[/snapback]
>
before my corolla was crashed, i´d ordered an 4efte, but i dont need it
This importeur does have an Beams, grey or red top.
now i had to decide
before my corolla was crashed, i´d ordered an 4efte, but i dont need it
This importeur does have an Beams, grey or red top.
now i had to decide
or maybe swap 3s-gte rev3 from MR2 (LSD ) .. more complicated but .... more power ..turbo etc
BEAMS swaped .......
>
Huh???? You don't make sense. I think you misunderstood the question.
Anyway... to make your 3rd gen 3SGE into a beams, you'll need a COMPLETE Beams head with both manifolds and all sensors. You'll need Beams pistons, and finally, the exhaust pipes and intake studd mentioned. It's easier to just swap in a Beams.
QUOTE(pasqual @ Jan 20, 2008 - 5:08 PM) [snapback]632592[/snapback]
>
I did this swap 4 months ago ...
what you need is :
exhaust Y pipe
and top of air-box ..
if you dont have with beams engine You need MAF sesnsor
swap is PnP ......no problems
1. Air intake + MAF sensor (beams -> right )
3. You need cut and make longer wiring (about 1m ...RHD to LHD conversion)
(I will make photo later)
I see You are located in Germany ... Im in Brno CZ
I did this swap 4 months ago ...
what you need is :
exhaust Y pipe
and top of air-box ..
if you dont have with beams engine You need MAF sesnsor
swap is PnP ......no problems
1. Air intake + MAF sensor (beams -> right )
3. You need cut and make longer wiring (about 1m ...RHD to LHD conversion)
(I will make photo later)
I see You are located in Germany ... Im in Brno CZ
Huh???? You don't make sense. I think you misunderstood the question.
Anyway... to make your 3rd gen 3SGE into a beams, you'll need a COMPLETE Beams head with both manifolds and all sensors. You'll need Beams pistons, and finally, the exhaust pipes and intake studd mentioned. It's easier to just swap in a Beams.
"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
>
for me is clear for beams swapo You need buy comlete beams engine (exhaut , harnes ,all sensors etc )
He just told us he have ordered 4efte for corolla and want change order for beams (means comple beams engine )
......i´d ordered an 4efte, but i dont need it frown.gif
This importeur does have an Beams, grey or red top.
ok maybe my mistake topic(question) is not about swap just make beams
so ...I forgot add one part more
1. BEAMS
a) (best chose is RedTop manual from celica st202 jdm .... but can be from mr2)
This post has been edited by pasqual: Jan 20, 2008 - 2:19 PM
QUOTE(Kwanza26 @ Jan 20, 2008 - 1:54 PM) [snapback]632618[/snapback]
>
>
Huh???? You don't make sense. I think you misunderstood the question.
Anyway... to make your 3rd gen 3SGE into a beams, you'll need a COMPLETE Beams head with both manifolds and all sensors. You'll need Beams pistons, and finally, the exhaust pipes and intake studd mentioned. It's easier to just swap in a Beams.
>
QUOTE(pasqual @ Jan 20, 2008 - 5:08 PM) [snapback]632592[/snapback]
>
I did this swap 4 months ago ...
what you need is :
exhaust Y pipe
and top of air-box ..
if you dont have with beams engine You need MAF sesnsor
swap is PnP ......no problems
1. Air intake + MAF sensor (beams -> right )
3. You need cut and make longer wiring (about 1m ...RHD to LHD conversion)
(I will make photo later)
I see You are located in Germany ... Im in Brno CZ
I did this swap 4 months ago ...
what you need is :
exhaust Y pipe
and top of air-box ..
if you dont have with beams engine You need MAF sesnsor
swap is PnP ......no problems
1. Air intake + MAF sensor (beams -> right )
3. You need cut and make longer wiring (about 1m ...RHD to LHD conversion)
(I will make photo later)
I see You are located in Germany ... Im in Brno CZ
Huh???? You don't make sense. I think you misunderstood the question.
Anyway... to make your 3rd gen 3SGE into a beams, you'll need a COMPLETE Beams head with both manifolds and all sensors. You'll need Beams pistons, and finally, the exhaust pipes and intake studd mentioned. It's easier to just swap in a Beams.
for me is clear for beams swapo You need buy comlete beams engine (exhaut , harnes ,all sensors etc )
He just told us he have ordered 4efte for corolla and want change order for beams (means comple beams engine )
......i´d ordered an 4efte, but i dont need it frown.gif
This importeur does have an Beams, grey or red top.
ok maybe my mistake topic(question) is not about swap just make beams
so ...I forgot add one part more
1. BEAMS
a) (best chose is RedTop manual from celica st202 jdm .... but can be from mr2)
This post has been edited by pasqual: Jan 20, 2008 - 2:19 PM
BEAMS swaped .......