Striking4

#1

So, I got back from Iraq a while back to a wonderful surprise. I had let my sister drive my baby around while I was gone and now it is in bad shape. The rear passenger quarter panel is smashed, the header is cracked and the radiator is blown. I don't have the time, money or patience to try and fix it all. So, I am going to part it out in hopes of making a little money and helping some of you guys out if there is stuff that you need.

If there is anything you are interested in let me know. I can send you pics of what I have and talk about pricing and shipping. Everything off of this car is available including a quick shift kit, strut tower bars, and exhaust. Just let me know. Hope to hear from you.

This post has been edited by Striking4: Dec 16, 2007 - 1:53 PM

purplegt4

#2

what shape is your shift knob in?

D_Dawg

#3

intrested in the trd quick shift and strutbar how much would u want for them?

cHinaman727

#4

equally interested in the shifter and strutbars. lmk.

---

"You should take a short walk on a LONG PIER"-Crazy SteveMy Celica's SRI

xs94st

#5

what kind of exhaust? interested in solely the muffler if it is stock. thanks!

---

Pandelica 2.0 in progress.

Striking4

#6

You want just the shift knob? I have a silver TRD one that is in good shape, and then the original stock leather one that is somewhat worn. The strut bars are homemade, so I will get some pics up of them so you can check them out. The muffler is not stock it is a Magnaflow. The shifter is in good shape. I will get pics of everything up hopefully later this afternoon so you guys can take a closer look at them. Thanks for your interest.

jcbass7

#7

off topic i know, but thank you for serving

free bump

Striking4

#8

>

QUOTE(jcbass7 @ Dec 16, 2007 - 3:10 PM) [snapback]623258[/snapback]

>
off topic i know, but thank you for serving

free bump

Hey thanks. I appreciate it. You don't know how frustrating it gets to have people constantly bitch at me and my buddies for going over there. So, thanks for your appreciation. It means a lot to have support.

Striking4

#9

http://im1.shutterfly.com/procserv/47b7cc3...6100BYuGjlq2csc

http://im1.shutterfly.com/procserv/47b7cc3...6100BYuGjlq2csc

K, here is one of the strut tower bars. Like I said, they are homemade. They don't look the prettiest, but I did notice a good effect on handling and response when I put them in. The rear bar is made the same just built for the rear strut towers (obviously).

http://im1.shutterfly.com/procserv/47b7cc3...6100BYuGjlq2csc

http://im1.shutterfly.com/procserv/47b7cc3...6100BYuGjlq2csc

Here is the quick shift kit still installed. If someone wants it, I can take it out and include all the bushings/spacers, etc. I really liked having this in the car, it was nice.

http://im1.shutterfly.com/procserv/47b7cc3...6100BYuGjlq2csc

Well, the shift knobs were in a lot worse shape than I originally thought. The original one I won't even sell, I wouldn't feel good about it. This is the TRD one. The stitching is coming apart. If you wanted to try and re-sew it, that might be an option, or you could take the outer completely off. The underside looks like it is in great shape.

hongkongnerdboy

#10

are your springs in bad condition?

---

QUOTE(thespacepanda @ Feb 21, 2008 - 4:37 PM) [snapback]644164[/snapback]When I worked for Pizza Hut our store won a health code violation.

Striking4

#11

>

QUOTE(hongkongnerdboy @ Dec 16, 2007 - 3:47 PM) [snapback]623269[/snapback]

>
are your springs in bad condition?

No, they are pretty good. They are Eibach, I think the sportline, but I can't remember.

hongkongnerdboy

#12

>

QUOTE(Striking4 @ Dec 16, 2007 - 5:51 PM) [snapback]623274[/snapback]

>
>

QUOTE(hongkongnerdboy @ Dec 16, 2007 - 3:47 PM) [snapback]623269[/snapback]

>
are your springs in bad condition?

No, they are pretty good. They are Eibach, I think the sportline, but I can't remember.

how many miles?

---

QUOTE(thespacepanda @ Feb 21, 2008 - 4:37 PM) [snapback]644164[/snapback]When I worked for Pizza Hut our store won a health code violation.

Striking4

#13

>

QUOTE(hongkongnerdboy @ Dec 16, 2007 - 4:04 PM) [snapback]623278[/snapback]

>
>

QUOTE(Striking4 @ Dec 16, 2007 - 5:51 PM) [snapback]623274[/snapback]

>
>

QUOTE(hongkongnerdboy @ Dec 16, 2007 - 3:47 PM) [snapback]623269[/snapback]

>
are your springs in bad condition?

No, they are pretty good. They are Eibach, I think the sportline, but I can't remember.

how many miles?

On the springs themselves? Ummm, prob about 40,000. ??

goferris

#14

hey i'm in utah and could use both your springs and front strut bar. are you ever up in the provo area? if so i will take both off you and you won't have to worry about shipping them. sorry that you have to part it out though.
LMK
Thanks

also do you have any pics of the wheels that are on it? you parting with them as well?

This post has been edited by goferris: Dec 16, 2007 - 7:12 PM

---

Call me a traitor! See if I care. ;)

Celicam8

#15

how much for the ac unit? I need just the defroster unit but doubt you want to part it out... do you have tweeter covers?

lazarpaul

#16

how much for the clear turns?
how do your seats look like?(pics would help)
how much for the cai?
also how many miles on the shocks?r they still good?
thanks:)

Agent21

#17

How much for the passenger high beam assembly? and possibly the drivers high beam assembly. Also the passenger side airbag.

This post has been edited by Agent21: Dec 16, 2007 - 9:03 PM

---

94 GT Liftback86 GTS Coupe (Racecar) #99 Crew Chief

zero07

#18

PM sent

---

Sorry, no animated sigs allowed.

CelicaST_CALI

#19

Wat condition are the front seats,passenger door outside panel,and the hood in?

---

BANNED. for life, you moron.

Muggs

#20

What is the condition of the interior door panels? I may be interested if they are nicer than mine.

Thanks.

bojangles_8686

#21

Does the power antenna work? I might be interested.

black13

#22

if your willing to sell, I'll buy the whole manual conversion parts. (shift nob, pedal assembly, drivelines, shift cables, etc.)
I want the whole thing but I won't be needing the transmission as I'll likely be getting that with my new 3sgte engine.

So let me know and give me a price of what your looking at. THanks.

EDIT:Forgot I'm also interested in the head unit setup. What I mean is all the pieces required to hold the main cd deck in place.

This post has been edited by black13: Dec 17, 2007 - 3:52 AM

zero07

#23

Striking4 check your pm's

---

Sorry, no animated sigs allowed.

CJOHNST3

#24

I need the clip under the hood that holds the hood pole up - it's the little thing you clip the pole on to when you close the hood.

also need one of the dash 2 inch by 1 inch covers like just under the right of the steering wheel

dabazied

#25

How many miles are on the clutch and flywheel? Also, how much for the piece of trim that is curved above the gauges(looks like a sun visor for the gauges, meaning just the part that is on the underside with the screws in it)? Cover for the "kick panel" fuse box near the pop hood latch? Driver's side low beam whole headlight assembly?

---

She's Alive...... Again!!!QUOTE (95CelicaST @ Nov 17, 2009 - 5:53 AM)QUOTE (SwissFerdi @ Nov 16, 2009 - 8:53 PM)QUOTE (95CelicaST @ Nov 16, 2009 - 11:51 PM)Sweet Jesus.You rang?Sorry, wrong number. :laugh:

Striking4

#26

Hey everyone. Thanks for your interest on this. I am currently working on getting pics and prices for the pieces you have each asked about. I will send them to you in a PM sometime in the next couple days. Thanks for you patience and interest.

StrikerFox

#27

bump for pics

goferris

#28

nvm

This post has been edited by goferris: Jan 16, 2008 - 3:06 PM

---

Call me a traitor! See if I care. ;)

trd94

#29

would you want to get rid of the drivers side wheel assemble with the bearing and the hub in it i am talking about everything , that the axle goes into and the control arm and tie rod,and the strut fastens to . if so send me a price on it and shipping to 44883 ohio.

pittfirefighter

#30

if you're still selling parts please let me know

---

Breaking Axles...