is there anything wrong with using camshafts from a 5th gen to re-grind by coltcams to use on a 6th gen. (both engines 5sfe). Would there be any problems?
Thank you
Thank you
camshafts - 6G Celicas Forums
probably not
"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
yes and no.
the 90-91 5th gens (GTs) have different (smaller lobes, less agressive) camshafts than the 92-99 GTs. I would suggest you use the same size cams as the ones in your car. Use any from a 92-99 GT and you should have no problems with a regrind.
the 90-91 5th gens (GTs) have different (smaller lobes, less agressive) camshafts than the 92-99 GTs. I would suggest you use the same size cams as the ones in your car. Use any from a 92-99 GT and you should have no problems with a regrind.
my st205 swapandour Beams swap