Here's how I've done my projector conversion. I followed the guidelines of two dutch Celicas.eu members, Kadett en BacerTune:

The projectors





Removing small parts



In the oven



Remove the glass with a plastic object to prevent damaging the glass



Remove Projector



Remove magnifying glass



Remove the metal thing by unscrewing the adjusting bolts



Cut the straight side



Straighten the diagonal side by attaching a metal plate





Attach everything in reverse order, before attaching the glass put both side in the oven. When the kit is soft add some new kit and attach the glass to the rest. After eveything has cooled down, assemble the small parts. The projector back together again:



After both are converted it's time to install them. This is how the car looked like with the old headlights:



This post has been edited by Paul_Celica_GT: Nov 27, 2007 - 5:16 PM

Continued:

Remove the frontbumper, according to this thread:



Close-up on the old lights:



And there gone:



Installed High beam



You need universal H4 connectors for the low beams



Low beams installed on the right side:



Check the difference:



Installed on the other side:



Both sides installed:



After you've put on the front bumper it's time for a beer and...

Mini photoshoot:









Also, have the lights adjusted by the Toyota Dealer. Perfect light image:





This post has been edited by Paul_Celica_GT: Nov 27, 2007 - 5:17 PM

Nice work man. That is way better than the one in dutch.

STICKY!!!

lol does that look like a surprised smiley face thing to anyone else now? oi i'll never look at my celi the same again