So after I repainted my rims this winter i had them balanced this spring on the inside instead of the outside like they were before ( i took the weights off to repaint). Well they looked good but i had some vibration over 70mph, but i rarely go over 70 bc of where i live. I know i talked to migga and jeff and they say its a common vibration but i didn't have it when i had my rims balanced with weights on the outside.

Now only my drivers side tire has wear in the middle of the tire, and i check my tire pressure every couple of weeks to make sure they are at the right level. So do I have wear bc of balancing on the inside or do i possibly have a bad drivers side ??????. I know that there are no CV problems, clunking or noise coming from my suspension. When i brake there is no vibrations to indicate a worn rotor, and wouldn't an alignment affect both tires?

What do you think?

Bad tire?
Balancing?
A bad part that isn't normally noticable?
S.O.L.....??

BTW I run on Falken 512's....

>

normally if the tires wear more in the middle its from overinflation, but seems odd in your case since you check tire pressure.

i wouldnt think it would be caused by the weights