I own a 98 Celica GT hatchback with the 4-speed automatic. Im wanting to get a hold of a BRAND NEW JDM motor for the car. I want the 3SGE vvti (red valve cover) that came on SS-11, and SS-111 models, or the 3SGTE turbo from the 97-99 turbo GT4's. Does anyone know where I can buy, or order one of these brand new engines and everything i would need with it to do the swap?

Dare I say......

www.ToySport.com!!!

Jon

(they have everything you have ever dreamed of.)

WELLL

the GT-FOUR only went until 98


since they ended in 98 not 2003 you wont be able to find a brand new engine...they werent made to be purchased separately.


the LOWEST pricest that I have came across is at www.jarcoinc.com


call them though...they wont respond to e-mails.

HEY,
if you want a vvti-motor my supplier will have one in at the end of Aug or early sept .. it is not brand new . if you wanted a brand new one be prepared to pay huge $$$$$ as used these motors are in short supply even in japan .. production numbers are low compared to other engines in celica range..oly made late 97- spring 99 ..

this is just motor / harness/ ecu and vvt-i guage cluster(white dials, and higher redline tach) .. you will need cluster to get tach set up for D.I.S


no offense to anyone but jarco is not the only cheap , reliable jdm importer out there .. Jarco sells stuff on ebay now that i paid double for last year from them.. they are very 2 faced about prices and parts on ebay ..
not saying they sell bad clips but just double check the net and shop around.. (also if you wanted to buy a clip and except projector headlights and such they almost always pull to sell on ebay unless you pay a lot extra ) .. bottomline just shop around..

my supplier emails comp test pix with every clip his sells..

drop me a email at kanji92@yahoo.com

derek

This post has been edited by 95WRC: Aug 6, 2003 - 1:18 AM

--95WRC+Aug 6, 2003 - 12:28 AM

QUOTE (95WRC @ Aug 6, 2003 - 12:28 AM)

no offense to anyone  but jarco is not the only cheap , reliable jdm importer out there .. Jarco sells stuff on ebay now that i paid double for last year from them.. they are very 2 faced about prices and parts on ebay ..   not saying they sell bad clips but just double check the net and shop around.. (also if you wanted to buy a clip and except projector headlights and such they almost always pull to sell on ebay  unless you pay a lot extra ) .. bottomline just shop around..

i understand what you're saying, but just think about what you said. "paid double for LAST YEAR". meaning...demand has gone up, yet, supply is still very low...therefore, price goes up...take economics. and as far as them being 2faced, as long as you talk w/ them, and develop a nice relationship, you will never be led astray. while i was shoppin for my clip, the only people cheaper were the peeps at Venus auto...and lemme just say, i would NEVER deal w/ them... i was lookin for the 4agze, and there is a MAP sensor, and AFM sensor version, and i was inquiring which types they had...and i got emails and phone calls sayin they were AFM, and some sayin they were MAP...so i requested pics, and sure enough, both AFM...and when i asked abou tmilage, they said "i think they ahve about 70k kilometers" and when asked about the gauge cluster "no, that's gone." so you have no way to tell (veeeeery shadey)......jarco gives you all that, and everything (from my experience) was very straight forward and honest... >>.

-John-

ps. i realize you meant no offense, and i don't take any, but i'm just kinda doin like you did, and offering an opinion. >>.

Derek, hey, who is your supplier that would beable to get me one of these motors? does he have a website? Does he have a front clip coming in, or just the parts you listed? If not a front clip, what else will i need inorder to do the sway to a vvti 3sge? I would greatly appreciate more info. from you.
jason
jjbenzo

--jjbenzo+Aug 5, 2003 - 11:21 PM

QUOTE (jjbenzo @ Aug 5, 2003 - 11:21 PM)

Derek, hey, who is your supplier that would beable to get me one of these motors? does he have a website? Does he have a front clip coming in, or just the parts you listed? If not a front clip, what else will i need inorder to do the sway to a vvti 3sge? I would greatly appreciate more info. from you. jason jjbenzo

You do realize that these motors aren't going to BRAND NEW, like you requested... right? If you want BRAND NEW... all I have to say is good luck...

Actually, you can order the JDM engines new from Toyota or TTE. Expect to pay $6000 + shipping for a new ST205 motor (no trans, no wiring harness, no sensors....).

I know one place that has (red top)beams '99 engine.They asking $2700 for it.If you are not scared of the price I can give you their information.That's the place that was selling black st205 on ebay couple month ago.

If you don't want a clip, you can get the engine, tranny, ecu, axles, harness, etc. from Storm Performance. That's where I got my engine(s) from, and their customer service and prices are great!

this might have been posted before but what are the specs for the 2nd gen 3sge?
I heard these were pretty good and were relatively cheap, and parts from the 1st gen in the U.S. can easily be used on the 2nd gen which was only released in Japan and Europe

-Phr0z3n664+Aug 7, 2003 - 10:57 PM

I'm currently converting a 3rd gen 3SGE to turbo for my wife's car. So far, the 3rd gen 3SGE is nearly identical to the 3rd gen 3SGTE except for a few area's (high compression pistons, more aggressive cams, and no oil feed line for the turbo). This engine is really quite built in it stock form - same bullet-proof crank and rods as the 3SGTE and it even has the oil squirters for the pistons.

The bad thing is that all the gaskets, oil pump, and water pump are the same as the 3rd gen - so you wont be able to use any US parts for them.

I saw another one of these engines on ebay yesturday for $850. I was tempted to pick it up and keep it NA for a future car.... with an exhaust, intake, and tuning this engine can push 200HP. But my wife would kill me.

-scothaniel+Aug 8, 2003 - 8:03 AM

Really? Hmmm, I didn't check the part number on it, but it physically looks the same. Toyota is known for having different part number for the same parts. I'll have to take a close look at it and compare to the ST205.

-scothaniel+Aug 8, 2003 - 9:37 AM

So, the SW20 with the 3rd gen 3SGTE and the ST185 use the same water pump?

-scothaniel+Aug 8, 2003 - 3:51 PM

-scothaniel+Aug 8, 2003 - 1:51 PM