yyet

#1

I had a quick question for all the 3S swappers... I wanted to do a swap too, but was just wondering if you guys have air conditioning in your 3S? B/c i always drive with the AC on, so i was just wondering if the 3s motor has AC b/c i didn't read anything about that before and my friends who did like k20 and sr20 swaps don't have ac.


Wyatt

Defgeph

#2

You have a GT, I believe you can use your stock AC unit and bolt it right up to the 3S. You just need to have the wiring hooked up for it.

---

I will return one day.

zipstrips

#3

im still working on getting mine hooked up. need to bolt upthe lines and charge the system... supposedly the wireing was done to keep it

2slow2nervous

#4

i need to get my lines ran also i dont have ac as of rite now.

lagos

#5

i have fully working AC, with the AC idle up system and everything. boost+ac=awesome.

---

15PSI - 30MPG - Megasquirt Tuned

yyet

#6

Okay cool... so most of you took the ac from the stock motor and bolted right up.

Wyatt

toyotacrazy

#7

My a/c works fine. Im using the 5s-fe compressor. My a/c idle up isnt hooked up though.

95celgt

#8

i installed mine a few weeks ago but I had to wire up the compressor to a switch because when the pressure switch would send 12V to the compressor it would make my engine die, but it works now, i just turn it off when im gonna go over 3500 rpm and run the car..

lagos

#9

>

QUOTE(95celgt @ Aug 12, 2007 - 2:16 PM) [snapback]587402[/snapback]

>
i installed mine a few weeks ago but I had to wire up the compressor to a switch because when the pressure switch would send 12V to the compressor it would make my engine die, but it works now, i just turn it off when im gonna go over 3500 rpm and run the car..

thats cause you dont have the idle up system.
hardwiring it to a switch will burn up your ac comp, because the system needs to cycle on/off ever few sec on its own.

---

15PSI - 30MPG - Megasquirt Tuned

115celi

#10

Do you need to replace the AC compressor or can you use the one on the 3s? What would I need to do to get it to work with an ST?

Dr_Tweak

#11

>

QUOTE(115celi @ Aug 15, 2007 - 8:09 PM) [snapback]588213[/snapback]

>
Do you need to replace the AC compressor or can you use the one on the 3s? What would I need to do to get it to work with an ST?

For an ST, you're going to need to use the 3SGTE compressor and then have some custom lines made. If you have the ST lines and at least part of the lines of the 3SGTE, a good tig-weldor can weld them together for you.

-Doc

---

-Dr Tweak, 6GC's resident engine swap wiring expert extraordinaireClick here to see my swapsdrtweak@phoenixtuning.com

zipstrips

#12

>

QUOTE(Dr_Tweak @ Aug 15, 2007 - 1:35 PM) [snapback]588219[/snapback]

>
>

QUOTE(115celi @ Aug 15, 2007 - 8:09 PM) [snapback]588213[/snapback]

>
Do you need to replace the AC compressor or can you use the one on the 3s? What would I need to do to get it to work with an ST?

For an ST, you're going to need to use the 3SGTE compressor and then have some custom lines made. If you have the ST lines and at least part of the lines of the 3SGTE, a good tig-weldor can weld them together for you.

-Doc

gt 5sfe lines should bolt up. i have them and they looked good,,guess ill have to get it on there to say for sure.

3rdgen3SGTE

#13

I remove all of that today...a/c radiator location is nice place to put my intercooler rad

I need to do many try to find 40 inch strap for alternator

---

Celica GTS turbo 19943sgte genIII Ct20b