Does anyone have a jdm power folding mirror diagram? I saw the sticky but I couldnt find a diagram that applies to me. I have a 8 wire with 10 pin connector for the switch. 11 wire with a 12 pin connector for the relay. The part # on the relay is 87989-20060. If anyone has a diagram or some advise, I would appriciate it. Thanks

>

The pinouts for the relay are in this post:
http://www.6gc.net/forums/index.php?showto...mp;#entry506720

The switch pinouts are in this post:
http://www.6gc.net/forums/index.php?showto...7207&st=140

I suspect you have a mismatched relay and switch. Possibly a 6th gen relay and a 5th gen switch.


This post has been edited by BloodyStupidDavey: Jul 9, 2007 - 3:49 AM

no, that's right. you have the 6th gen relay.

and here's a pic of the wiring diagram.

>
Ok,
so on this diagram, does it matter that the pinouts are out of order according to the diagram? Or are they just put in the diagram in no order? Thanks

Thanks to azian_advanced and the diagram provided I got my mirrors working perfectly! I just threw it together for now. I need to hard wire it in and finish switching the mirror housings onto the jdm power folding motors. Thanks for all the help!
-toyotacrazy

glad you got it working.. btw, DON'T switch to your stock LHD housings! you'll have one side sticking out further than the other while folded..
stick with the jdm housings...

>
Too late. Oh well. I switched the housings, (just the painted parts) I kept the heavy metal mounting bracket that fits on the door, from my gt. I'll see what happens when I mount the pass. side and get them hard wired. Thanks