lagos

#1

i have a set of hps pads on order and im thinking about going with brembo blanks. anyone have this combo? how well do they stop? and squealing issues? hows the brake dust?

right now i have a set of satisfied pro ceramic pads with drilled bremobs. ever since i installed them, ive been getting a ton of squeal from my brakes. its very loud and very annoying.

---

15PSI - 30MPG - Megasquirt Tuned

massbrandon

#2

I was thinking about going with the exact same setup. Let me know if you get them Art.

purplegt4

#3

I have brembo blanks & toyota pads. Stop great, no squeal. Minimal dust.

This post has been edited by purplegt4: May 30, 2007 - 3:55 PM

LewFX

#4

doesnt sound like your satisfied

spolski07

#5

>

QUOTE(LewFX @ May 30, 2007 - 3:55 PM) [snapback]563040[/snapback]

>
doesnt sound like your satisfied

lmao took me a second to catch that

---

2015 Subaru WRX. World Rally Blue/Black2001 Honda S2000. Spa Yellow/Black

lagos

#6

>

QUOTE(massbrandon @ May 30, 2007 - 4:10 PM) [snapback]563030[/snapback]

>
I was thinking about going with the exact same setup. Let me know if you get them Art.

will do, brandon.


i thought a few people on this site had this combo?

---

15PSI - 30MPG - Megasquirt Tuned

6strngs

#7

I have HPS pads on irotors drilled and slotted rotors. pretty quiet, and they stop great! but they do make quite a bit of dust, especially on my front wheels.

---

94 GT - Sold -------- 69 Pontiac Lemans - Sold88 Alltrac - Sold ---- 04 WRX - Sold00 GT-S - Sold ------ 91 Miata - project/drift car95 GT - Sold -------- 96 GT - New Daily Drive

LewFX

#8

i got hawks on the ate slotted rotors, works good

95CelicaST

#9

Whats wrong with Toyota pads? Why not some Brembo blanks and a set of Toyota pads?

---

1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket

playr158

#10

toyota pads are probably over priced, and under perform.....

I think you're getting squealing as a result of the pads....crossed drilled rotors (i didn't know brembo made them) don't produce the squeal.

lagos

#11

>

QUOTE(playr158 @ May 31, 2007 - 11:42 AM) [snapback]563367[/snapback]

>
toyota pads are probably over priced, and under perform.....

I think you're getting squealing as a result of the pads....crossed drilled rotors (i didn't know brembo made them) don't produce the squeal.

its all about the combo tho. if you read tirerack reviews, some people with different pad/rotor combo's have squeal and some dont. im also looking to replace the rotors because they are starting to warp.

---

15PSI - 30MPG - Megasquirt Tuned

LewFX

#12

toyota pads are way overpriced and now they dont include shims

6gsillyca

#13

I have brembo blanks and axxis ultimate pads and they stop on a dime. They do squeal a tad though, so I was going to add another coat of antisqueal and properly bed the pads. Would it be better to 40-10 x10 or 60-30, 50-20, 40-10 x 10 each to bed the pads? and how long for cooldown inbetween each?

Rockford

#14

I have the HPS pads on my 4 disc and stop great...



i'm searching for the Brembo max, and couldn't find them

---

Celica ST202