I took a good look at the offset chart, looked through a bunch of topics, and I can't figure everything out so I'm gunna ask so I don't get the wrong parts.

I am getting 17"x7" rims w/an ET 35. What size spacers do I need to make it look flush? (I have stock suspension)

ALSO during my search I saw people write different specs for the front and rear, does this mean I need different sized spacers for the front than the rear?

Thanks

This post has been edited by I3arruka: May 23, 2007 - 2:04 PM

That should sit pretty flush as it is. +39 is stock, so it should be fine with +35. If it sits a little sucked in you can use a 5mm spacer.

Some people put more spacers on the back to give it a sort of staggered look, which is what I believe you are referring to with different spacers front and back.

This post has been edited by 95CelicaST: May 23, 2007 - 2:06 PM

Does stock come somewhat staggered?

Thanks for the help

Not really, no. If it does it is so small you don't notice it.