tryn to wire this thing in and yea i dont think the how to is right....i wired the whole thing up and it didnt even come on! so i went to every wire to find the ig power wire and i found that but idk if i wanna try to start the car because the other wires may be hooked up wrong thanks to that how to. can somone send me the correct wiring diagram

hmmm its funy how alot! of ppl have this installed on their cars here but noone is willing to help.......

Here is the engine control schematic for your 95 ST:
http://www.celicatech.com/vfewdsou/1995/95...ic/engcon7a.pdf
This should be all you need.

>
that's cause the how to is how to install it on a GT! the GT and ST probably have different ECU's, and thus, different pin-outs. ask hurley97 or Dr_Tweak if they have the pinout for the ST.

>
you would not believe how much this helped just by looking at it haha it kinda matches up with the how to but they counted backwards when naming the ecu pinouts. im gona give it a try tomorrow before work and we'll see what happens but im still not too sure on the ig power...

heres my thread on my 97ST http://www.6gc.net/forums/index.php?showtopic=45724&hl=

and presure2's on his 94GT http://www.6gc.net/forums/index.php?showtopic=22175&hl=

IIRC I found the pinouts to be the same but the wire colors were different. you should not go by wire color alone anyway, you need to double check the pinout and connector

I was wondering if someone could do a writeup on this and make it a sticky, as this would be some really useful info...i would, but i dont have a 3sgte, lol

hooked it up and everything works perfect thanks alot guys!!