7afe cluster problems - 6G Celicas Forums

Over 1M Posts • 84K Topics • 9K Authors

7afe cluster problems - 6G Celicas Forums

Topic #47742 4 posts Started by Clemy7afe

Clemy7afe

Hi guys/gals i fitted a 4age 20v motor in to a corolla which had the 7afe motor.

Now the problem is when i rev the 4age to 8000rpm , the rev needle bounces and stays at 6700rpm .. it doesnt want to move futher.

How can i fix this...

All help appreciated

95CelicaST

does the engine get to 8000 RPM's? Are you useing the 20V ECU?

1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket

netrata

Yes, what ECU are you running and what 20v engine? Here's a link from club4ag that has a thread on "20v revcut."

http://forums.club4ag.com/zerothread?id=2552

This post has been edited by netrata: Apr 30, 2007 - 11:36 PM

Clemy7afe

I am using the Silvertop 20v motor, and i am using a Aftermarket management...

It revs till 8000rpm , but on the cluster the needle bounces back on 6700rpm.... hope this helpsss

Thank you for your help

7afe cluster problems - 6G Celicas Forums

Contact 6GC Archives