what do you guys do to keep your couplers from poping off your intercooler piping? i just tryed sealing it with high temp silicone then clamping it down but i only did it in one spot to see if it would work. so far so good
BOOST GETS YOU LAID!!!!
tbolts. in almost 3yrs i have not had a single pipe come loose with them installed.
15PSI - 30MPG - Megasquirt Tuned
^^^ Tbolts are indeed the way to go.
Visit My Automotive & Tech Blog.
QUOTE (Galcobar @ Oct 15, 2008 - 2:44 AM)You want power but have no money. That's a problem.Cheap. Reliable. Fast. Pick two.
T-bolt clamps will hold them for sure in most cases.
For higher boost application, use t-bolt clamps and get some bead weld on the ends of the piping or flare them.
This post has been edited by Gary: Apr 9, 2007 - 4:44 AM
_Gary
put some deep scratches on the ends of the pipe.... spray brake cleaner on then before putting'em on......works for me.......but i'm only pushing 10psi
