Lemme know.
WTB: headers for an ST - 6G Celicas Forums
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
I've found those, as well as at least a dozen corolla headers on there. I'd rather buy from someone who's already had them on their car and had them work out fine rather than buy a set on ebay that I cant tell the quality of the welds on and that havent been put to the test.
trust me, I'm very familiar with ebay
Somethings I'd rather buy from someone who is in it for the cars, not just the profits
trust me, I'm very familiar with ebay
Somethings I'd rather buy from someone who is in it for the cars, not just the profits
Thats all their is. There are only a couple companies that make headers for the Celica, and those are really Corolla headers too. Your best bet is buy a set of ebay headers and have the welds reinforced.
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
dont trust drivingear headers i bought the exact same headers and it was short an inch and a half on the downpipe and thiers no way the 02 sensor can stay still in the slot the hole is too big for the 02 sensor and thiers no tread for the o2 sensor to screw on and i believe the other headers are going to be exactly the same TRUST ME i paid almost 140 for mines WASTE OF MONEY i would rather go to the shop custom make headers
huh?
jk. exactly why I'm asking about them.
jk. exactly why I'm asking about them.
the ones on ebay are ideal for the 94-95 ST. You just need to extend the b pipe and have a second o2 flange welded on (the 94-95 o2 sensors are completely different from the 96-97) so the first o2 sensor fits just fine in that header.
for the 96-97...you guys are screwed
for the 96-97...you guys are screwed
my st205 swapandour Beams swap
so there's nothin then? not even modified?
dude i got the 7afe headers for a corolla, all that you gotta do is get your exhaust guy to weld the 3 inch gap inbetween your CC and downpipe
its no big deal and they sound hella nice.
119 dollars made me holler :-p
its no big deal and they sound hella nice.
119 dollars made me holler :-p
**If you play My Brute, joing the 6gc.net clan!**--A section of a kid's actual test that had been scanned--
nice reference there.
holla-olla-olla-olla-olla
Word. Works for me. Still if anybody has a set they're trying to sell, let me know. I'm not buying em for like a week.
holla-olla-olla-olla-olla
Word. Works for me. Still if anybody has a set they're trying to sell, let me know. I'm not buying em for like a week.
>
i just had mine welded yesterday they sound really good. Exhaust shop charged me $65. Its worth it trust me!
This post has been edited by djestylez401: Apr 7, 2007 - 9:06 PM
QUOTE(tonytutino @ Apr 7, 2007 - 12:50 AM) [snapback]544202[/snapback]
>
dude i got the 7afe headers for a corolla, all that you gotta do is get your exhaust guy to weld the 3 inch gap inbetween your CC and downpipe
its no big deal and they sound hella nice.
119 dollars made me holler :-p
dude i got the 7afe headers for a corolla, all that you gotta do is get your exhaust guy to weld the 3 inch gap inbetween your CC and downpipe
its no big deal and they sound hella nice.
119 dollars made me holler :-p
i just had mine welded yesterday they sound really good. Exhaust shop charged me $65. Its worth it trust me!
This post has been edited by djestylez401: Apr 7, 2007 - 9:06 PM
"breakin necks since 1994"94 Toyota Celica ST -Project Car91 Acura Integra LS/VTEC SWAP-SOLD90 Honda Civic Hatch DX LS SWAP-The Racing Whip
yessuh!
**If you play My Brute, joing the 6gc.net clan!**--A section of a kid's actual test that had been scanned--
so theres pretty much nothing made for the 96-97's unless its custom made?
my cardomain