Hi Guys,

Installing a new electronic boost controller. Now, every one says it is the easiest thing, and I am sure I must have missed something simple.

On the CT-26 the are 2 ports coming off the wastegate actuator. One has a hose from the turbo and the other from the intake manifold. All images I can find for the installs on the net only have the one port.

Are both of these ports to be connected to the boost controller or is one port an in and the other an out?

Thanks

The controller goes in between the compressor & wg actuator. You can hook the pressure sensor to the intake mani tubing.

>

ok got the first bit. So i use the port that has the hose from the compressor. When does the other port from the actuator go to?

The other port on the actuator need to be disconnected and capped.

>Bingo. Remove that vacuum line and cap the extra connection on the wastegate actuator and the hardline that the hose used to go to.

Then just hook up the boost controller between the turbo and the wastegate, following the correct "in" and "out" ports (see your boost controller documentation for that).

-Charlie

Awesome, thanks guys.

Hopefully won't oveboost anything today. lol