Over 1M Posts • 84K Topics • 9K Authors

Help me find a 2sge part - 6G Celicas Forums

Topic #46758 13 posts Started by playr158
I'm looking for a 2sge (toyota motor) bell housing

it came on the RWD 2.2L TOYOTA CORONA back in the 60s and the 70s

if anyone could help me find this i'm sure i could reward a prize wink.gif
Dun dun dunnnnnn..... secrets!!!!!!

1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
i might have some one in toronto who can get u one.
Why? wink.gif

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
whoa buddy thats old school stuff right there.
2SGE?
Or 2SE?

I don't think there are any Toyota engines from the 60s or 70s [maybe 78/79] that are an E [EFI].
They are all carbureted.
yes it was carburated...2sge

and valo if you do let me know....

i still know very little about this setup and not 100% sure but if you can find someone with one and let me know their asking price i'll look into

hopefully i can figure this setup out kindasad.gif

This post has been edited by playr158: Apr 1, 2007 - 11:21 PM
u sure it was out of a corona?...cuz apparently late 60s corona's had 3RC and 3RB motors...and i dont think toyota even used any 1 number, 3 letter engine codes untill they went with fuely...even then it was still alot of 1 or 2#, 2 letter engine codes. Like my 83 is only a 22RE still. Ill keep looking though but i havent heard of a 2sge. I actually just looked it up and the 2sge is out of an older camry apprently confused.gif If you need a bellhousing from a 60s/70s corona, its gonna be out of a 3RC or 3RB motor, and i can get you one most likely.
this is what i've been told
"well toyota made a 1sge and a 2sge in the corona back in the 70s80s. these are near impossable to find so someone in the philapeins recast them and now these are pretty hard to find to.
hope this answers your questions"


but basically the task at hand....

find a bell housing and transmission combo (W series tranny!?) for RWD that will mate up to a 3sgte

This post has been edited by playr158: Apr 2, 2007 - 1:04 PM
oh..if you need a w series tranny, i can get you one no problem. Or do you just need the bell housing?? I can get both. Theres a guy i know through my classic toyotas club whos sellin a RWD 3s setup with the motor but i dont think he has a W series tranny. But i could definatly find you one. W series came in most mid 80s rwd toyotas *supra,celica,cresedia, older corollas*..just lemme know if you need the bellhousing adaptor for a 3s to a w series, or if you need the adaptor + the tranny
>
QUOTE(Valo666 @ Apr 2, 2007 - 2:10 PM) [snapback]542355[/snapback]
>
oh..if you need a w series tranny, i can get you one no problem. Or do you just need the bell housing?? I can get both. Theres a guy i know through my classic toyotas club whos sellin a RWD 3s setup with the motor but i dont think he has a W series tranny. But i could definatly find you one. W series came in most mid 80s rwd toyotas *supra,celica,cresedia, older corollas*..just lemme know if you need the bellhousing adaptor for a 3s to a w series, or if you need the adaptor + the tranny


i can find a tranny but the adaptor to make the 3s mount to a W series to make it RWD is what i'm after...

INFO!!!!!!!!1

forum link or such?

This post has been edited by playr158: Apr 2, 2007 - 2:22 PM
ill call the guy i know who has the conversion kit...see how much he wants just for the bellhousing adaptor...he was sellin a 2nd gen 3s with the adaptor for $1100 CND..so im gonna just ask about the adaptor for you.