OK so I replaced my front driver's side whell bearing and used and aftermarket bearing and it slid in pretty easy, only had to usea dead blow hammer. Had a bit off a loose feeling since I put it in.. I'm hoping it's just the bearing and NOT the spindle.. SO my question is are they sposed to be a press in fit bearing.. I have access to a pres so thats no worries but don't wanna go out and buy toy bearing only to have same problem.. Thanks
Wheel bearings?? - 6G Celicas Forums
yea it should be pressed in.. and now there shouldn't be a loos feel to them..
[TeamNJCT
lol, you got the bearing in with a hammer? Ouch, you need it pressed in man.
Thats what I thought,, >
> Gonna have to get a Toy bearing and try it HOPEFULLY the spindle isn't ****ed DOOOH!!!
> Gonna have to get a Toy bearing and try it HOPEFULLY the spindle isn't ****ed DOOOH!!!
the bearing will get damnged befor anything else
[TeamNJCT
--macavely+Jul 10, 2003 - 9:37 PM
I know that, just thinkin that it may have been wore before I put new bearing in, or if bearing isn't quite big enough it may be rattlin around in there chaffing on the spindle..
| QUOTE (macavely @ Jul 10, 2003 - 9:37 PM) |
| the bearing will get damnged befor anything else |
I know that, just thinkin that it may have been wore before I put new bearing in, or if bearing isn't quite big enough it may be rattlin around in there chaffing on the spindle..