my air bag light pop up all of a sudden so what should i do? is there any way to kill the light or see what the problem is like a dianostic test or something? or do i have to go to the shop to turn the light off?

The ABS has it's own ABS ECU and if there is a prob with the system (sensor or whatever) it shuts the system down and you have normal braking ability and the ABS light will remain illuminated. You can then read the ABS codes


94-95
ignition in the ON position,
bridge E1 & TC in the diagnostics box, just like checking codes, read the code from the ABS light
codes 31-34 are the sensors @ each wheel.

31 Malfunction of right front wheel speed sensor signal. Check
speed sensor, sensor rotor, wiring harness and connector

32 Malfunction of left front wheel speed sensor signal. Check
speed sensor, sensor rotor, wiring harness and connector

33 Malfunction of right rear wheel speed sensor signal. Check
speed sensor, sensor rotor, wiring harness and connector

34 Malfunction of left rear wheel speed sensor signal. Check
speed sensor, sensor rotor, wiring harness, and connector

for the air bag light your need the scan tool to pull codes.

you have a 97 correct?

you need an OBDII scanner. depending on the scanner you get it'll either just give you a code which you'll have to look up or it'll tell you exactly what the problem is. some OBDII's allow you to clear CEL's so maybe its the same for the airbag light

Advance auto parts should let you use there's for free....at least they do by my house

This post has been edited by Daftboy: Sep 27, 2006 - 11:33 AM

thanx guys...ill see what i can do.