About a week ago i tried to pull my passanger seat forward, and well it only moved an inch. I checked under it and the wire that connects the two sides is fine. I cant seem to find anythign wrong with it, but it will only budge an inch. It in only on the side closest to the middle on the car, the outside one will give some play.

I was going to try and take it out, but it looks liek its covering up the bolt on the inside.

I run a carpool to school , and i kinda fell sorry for the dude behidn that seat, any help is much apresheated.
Thanks

This post has been edited by Vissi: Sep 19, 2006 - 5:28 PM

pop the caps off from over the bolts and just take the seat out and take a look. Theres 4 12mm bolts(i think), then you just have to unclip the harness from the belt sensor. Its easy enough to take out and just check the sliders and inbetween the rails on the sliders. Ive dropped coins out of my pockets like pennies and nickels and they have made my tracks stick.

Alright, I looked at the rails, but i didnt see any notisable problems, I could only find 2of the 4 bolts though, does anyone have any write-ups, or diagrams I can look at for getting the seat out,?I think the inner back bolt may be blocked by the seat though .

Also does anyone know the part# for the bolts that hold on the hatchback lifters? Mine were broke so i took em off, and i got new ones but they didnt come with screws.