i dont really wanna stiffen my suspension, i just get tons of horrid noises and vibrations that werent solved by a wheel balancing/rotation, so im trying to get the ride quality improved and im researching little by little
Sway bar end links - 6G Celicas Forums
Would I save a lot of time/effort if I replace both the endlinks and the rear sway bushing at the same time?
>
sway bar bushing are easy, end links are a bit harder.
QUOTE(Starcraftjunkie @ Feb 21, 2007 - 7:14 PM) [snapback]529180[/snapback]
>
Would I save a lot of time/effort if I replace both the endlinks and the rear sway bushing at the same time?
Would I save a lot of time/effort if I replace both the endlinks and the rear sway bushing at the same time?
sway bar bushing are easy, end links are a bit harder.
my st205 swapandour Beams swap
>
i will try that, thanks.
just a quick question though, i've never taken a close look at those bushings, but would i have to unbolt the endlink-to-sway bar connection and slip the bushing through the sway bar? either way, i'll probably figure it out myself.
QUOTE(Batman722 @ Feb 21, 2007 - 12:14 AM) [snapback]528947[/snapback]
>
if you're getting clunking when going over any bumps (like something is knocking around back there) then it's more than likely the sway bar bushings, about $6 each from the dealer.
if you're getting clunking when going over any bumps (like something is knocking around back there) then it's more than likely the sway bar bushings, about $6 each from the dealer.
i will try that, thanks.
just a quick question though, i've never taken a close look at those bushings, but would i have to unbolt the endlink-to-sway bar connection and slip the bushing through the sway bar? either way, i'll probably figure it out myself.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
>
here's a quick link
http://www.colin99.co.uk/home_car.html
QUOTE(azian_advanced @ Feb 21, 2007 - 11:19 PM) [snapback]529228[/snapback]
>
>
i will try that, thanks.
just a quick question though, i've never taken a close look at those bushings, but would i have to unbolt the endlink-to-sway bar connection and slip the bushing through the sway bar? either way, i'll probably figure it out myself.
>
QUOTE(Batman722 @ Feb 21, 2007 - 12:14 AM) [snapback]528947[/snapback]
>
if you're getting clunking when going over any bumps (like something is knocking around back there) then it's more than likely the sway bar bushings, about $6 each from the dealer.
if you're getting clunking when going over any bumps (like something is knocking around back there) then it's more than likely the sway bar bushings, about $6 each from the dealer.
i will try that, thanks.
just a quick question though, i've never taken a close look at those bushings, but would i have to unbolt the endlink-to-sway bar connection and slip the bushing through the sway bar? either way, i'll probably figure it out myself.
here's a quick link
http://www.colin99.co.uk/home_car.html
my st205 swapandour Beams swap
Sway links work. 
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
>
who do we talk to in ordering them?
and where can i get the bushings from? Would they come with the ST swaybars if i got the full set?
thanks
This post has been edited by urbandork: Feb 28, 2007 - 5:31 PM
QUOTE(snapshotgt @ Feb 25, 2007 - 6:00 AM) [snapback]530059[/snapback]
>
Sway links work.
Sway links work.
who do we talk to in ordering them?
and where can i get the bushings from? Would they come with the ST swaybars if i got the full set?
thanks
This post has been edited by urbandork: Feb 28, 2007 - 5:31 PM
Call twosrus, and ask for Dave. Toll free: 1-(877)-328-9285
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
>
that number was for an mr2 club thingy i left a mesg but i dont think it was the right number.
QUOTE(snapshotgt @ Mar 2, 2007 - 8:44 PM) [snapback]532223[/snapback]
>
Call twosrus, and ask for Dave. Toll free: 1-(877)-328-9285
Call twosrus, and ask for Dave. Toll free: 1-(877)-328-9285
that number was for an mr2 club thingy i left a mesg but i dont think it was the right number.
can't you just order off the twosrus website?
>
I got that number from the website .. i think they're the same thing - or something like that.
QUOTE(urbandork @ Mar 2, 2007 - 11:32 PM) [snapback]532372[/snapback]
>
>
that number was for an mr2 club thingy i left a mesg but i dont think it was the right number.
>
QUOTE(snapshotgt @ Mar 2, 2007 - 8:44 PM) [snapback]532223[/snapback]
>
Call twosrus, and ask for Dave. Toll free: 1-(877)-328-9285
Call twosrus, and ask for Dave. Toll free: 1-(877)-328-9285
that number was for an mr2 club thingy i left a mesg but i dont think it was the right number.
I got that number from the website .. i think they're the same thing - or something like that.
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
so did anyone find out if the 185 front endlinks will work for our cars??
will front end links from a SW20 work on our car??? I got a guy who lives 10 min away from me back in toronto whos got a set from twosrus for cheap.
dave called me back and let me know that hes collecting the parts to get the links built and hopfully will have them on his site soon.
i was on twosrus.com yesterday and they are listing them for the ST202 now. Time for me to order some up.
>
is there a discount on them or do we pay the full price...
i'm about to order my ST sways, along with installing my springs and most likely get these while i'm at it
QUOTE(Valo666 @ Mar 9, 2007 - 7:29 PM) [snapback]534745[/snapback]
>
i was on twosrus.com yesterday and they are listing them for the ST202 now. Time for me to order some up.
i was on twosrus.com yesterday and they are listing them for the ST202 now. Time for me to order some up.
is there a discount on them or do we pay the full price...
i'm about to order my ST sways, along with installing my springs and most likely get these while i'm at it
ordered mine..and no discounts..only person who got one was the first person to try em cuz they were the giunie pig. Should b here next week, will post pics when i get them.
Just to make sure...the front and rear links are compatible with our 6gen, right???
>
Yep, Dave has got the perfect setup.
QUOTE(Davesceli @ Mar 30, 2007 - 11:49 PM) [snapback]541641[/snapback]
>
Just to make sure...the front and rear links are compatible with our 6gen, right???
Just to make sure...the front and rear links are compatible with our 6gen, right???
Yep, Dave has got the perfect setup.
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
here you go ..
rears and fronts straight bolt on .. fronts are a tad bigger than oem but i dont think you will notice any diff
will driving
rears and fronts straight bolt on .. fronts are a tad bigger than oem but i dont think you will notice any diff
will driving
Old guy with the toys95 ST205 WRC (the real deal)94 MR2 HARDTOP Supercharged 2GR/6SPD 22 owned
Pure sex.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
i received my set friday...hopefully install them by this wknd
btw anyone know a good places/prices to get the ST sway bars? anyone have deals on them now?
btw anyone know a good places/prices to get the ST sway bars? anyone have deals on them now?
dam, these look cool, but i just ordered oem replacements for $30 shipped for the pair....stupid hex was stripped already when i started my bilstien strut-setup:(
installed (rear)
^^ those are loosly fitted
then I tightened them and here's a shot 100% done
^^ those are loosly fitted
then I tightened them and here's a shot 100% done
my st205 swapandour Beams swap
>
i was just wondering... didn't everyone's sway bar set come with new bushings/brackets? cause i think mine did... (was a while ago when i got them) i get some sounds in the rear when going over bumpy roads but i never looked into it bcuz it sounded like my spare tire jack
QUOTE(Batman722 @ Feb 21, 2007 - 2:14 AM) [snapback]528947[/snapback]
>
if you're getting clunking when going over any bumps (like something is knocking around back there) then it's more than likely the sway bar bushings, about $6 each from the dealer.
if you're getting clunking when going over any bumps (like something is knocking around back there) then it's more than likely the sway bar bushings, about $6 each from the dealer.
i was just wondering... didn't everyone's sway bar set come with new bushings/brackets? cause i think mine did... (was a while ago when i got them) i get some sounds in the rear when going over bumpy roads but i never looked into it bcuz it sounded like my spare tire jack
98 Celica GT -- 5S-FTE: 230WHP 237FT-LBS06 Civic EXMy For Sale Thread
ordered mine today woot woot.
crap... i completely forgot about this thread... i just bought new oem endlinks because mine were messed up after someone hit me...
i have ST sway bars. i know you can't feel it, but are they actually stronger so a stiffer sway bar won't cause it to wear/break as easily?
if so i think i'm gonna refund the ones i just bought and get these instead.
or since i got new ones anyway will they hold up just as good as these?
i have ST sway bars. i know you can't feel it, but are they actually stronger so a stiffer sway bar won't cause it to wear/break as easily?
if so i think i'm gonna refund the ones i just bought and get these instead.
or since i got new ones anyway will they hold up just as good as these?
98 Celica GT -- 5S-FTE: 230WHP 237FT-LBS06 Civic EXMy For Sale Thread
>
Was there a noticable difference when you installed them?
QUOTE(Batman722 @ Apr 11, 2007 - 9:52 PM) [snapback]545659[/snapback]
>
Was there a noticable difference when you installed them?
"Remember, amateurs built the ark and professionals built the Titanic. Butrevolutionariesbuilt the Celica!"- Me
Did anyone install the front sway bar end links?