It's getting a front-mount intercooler.

I'd charge $400 for that conversion, it's a bit more of a pain in butt than most harnesses.


>

Did I do your harness?

--------------

Update, I just cranked up the engine and it started right up on the first try! VROOOM!!!!

>

Very cool.

The man wastes no time!! Rock on Doc.

good job man, looks like your getting better and better at these swaps!

I cant bowdown enough!

Please Dr. TweaK! get mine working!
I should fly you out here and get my damn thing to work. Or tow my car there.
which ever is cheaper...

its been so long since ive been on this forum. to tell the truth i hate going here cuz my car just sits there and dont get any work done.

Actually you should just ship it over here, it's not all that expensive.

-Doc

>

It must be really nice to have such passion about what you do... or am I assuming too much? It looks like you really enjoy your work.

Doc Tweak r0x0rs my b0x0rz.


Great job with all these swaps, I really admire the work you've done and you continue to 1-up yourself each time. Keep it up!!

Thanks for the nice comments everyone. I have some more pics that I haven't uploaded yet, I'll add them tomorrow. I've road tested the car and it runs great! I just needs to go to the exhaust shop and get a couple of custom a/c lines installed.

>

No you're pretty much right, I actually loose sight of that from too much stress, which is a mistake. I DID get into this because I love doing swaps and tuning engines, and sometimes I forget that!

In fact, that's probably 1/2 the reason I post this stuff up, because showing my work and getting feedback on it often inspires me to keep it up.

-Doc

This post has been edited by Dr_Tweak: Jul 30, 2006 - 10:03 AM

>

eash there tweak...i dont know you dude but i'll tell you this. theres 3 people on this site i stop and stair when they post things....tweak...manny and nik. i dont care if its a write up on how the god damn wheel turns.....write it up dude. if people can post pics of their car when it gets a wash then you can post what ever you want. keepit up dude!

Top mount intercooler installed to test the engine...



Front-mount finished up....

>

Can i get 1/2 off the price of the finishing work on mine if i ship it to ya and just keep on giving you wonderful feedback? hehehe

well i thought i'd give it a try.But you have inspired me once again to get under the hood of my car and get my engine going. i just got to get hold of a few friends and a few tools and you should be expecting alot of messages from me when i get everything set.

Heheh alright.

Well the car went home today after a few road tests and a dyno run. It feels very strong and smooth, definetely a worthy swap. When the owner gets home I'm sure he'll post up his impressions.

-Doc

How did the dyno go?

ive always wondered.. doesnt SC engines like the short intercooler piping?

dont tease us doc, what did it dyno?

howd it feel in comparison to the 3sgte swaps? i know youve test drove them before so itd be nice to know how it compares

Tweak you work out of GA right? If I ever get money for a swap im bringing it to you lol.

By the way, found a typo on the site.



This post has been edited by WH95TE: Aug 2, 2006 - 2:01 AM

thanks Doc for the pictures and info.

you make 6gc a better community with all the knowledge you bring.

doc can you get a scale and weigh each engine you put in? i want to know the weight of the 3sgte, beams, 7afe, 4age.. ect.

I'm not going to release the dyno numbers on THIS swap, for two reasons. One, it's up to the owner to do that, and two, there was a hole in the intercooler that he gave me which was causing a boost (and vacuum) leak, and so he wasn't running nearly the amount of boost that he should have been, so the numbers were a little low.

However, I will tell you that another swap I did, same engine, but into a Corolla, was dynoed the same day. Stock besides an SS Autocrap header and a front-mount intercooler, it made 150whp at 9 psi.

The s/c has no problem filling the intercooler system with boost, however ALL forced induction setups benefit from shorter intercooler piping. One warning I will issue about the 4AGZE though, the throttle plate is the first thing in the intake system, so the WHOLE intercooler system is under vacuum. This presents more than the usual number of chances for vacuum leaks and whatnot.

For driving impressions, it's a much different feeling than the 3SGTE. The the 3S feels okay at first, with a WHOOSH of power coming on around 2500-3000 rpm, and holding fairly well up to redline. The GZE on the other hand has no suddeness to it, it has extremely smooth and linear power from idle on up with a slight drop towards redline (like the 3S). The power is instant and if you don't have good tires, will burn rubber at pretty much any point in the RPM band in first or second gear. It feels a lot like you're driving a car with a pretty big V6 in it.

WH96TE, yeah my partner George does the website and he's not too savvy with his spelling skills. I pointed that one out to him a while ago but he hasn't gotten to it.

The 4AGZE is marginally heavier than the 7AFE, but it would be interesting to weigh each of them and see what the numbers are. I'll look into it.

-Doc

This post has been edited by Dr_Tweak: Aug 2, 2006 - 7:05 AM

This really feels like the swap im going for.. rofl how hard would it take to get 200whp on those things?

Ive been reading gze infos at ae92gts.com for a while. (yrs back) would a rebuild really benefit the engine to create more hp

>

To get to 200whp I'd probably be looking at a larger supercharger, like the SC14, injectors, piggyback, and some tuning.

-Doc

This post has been edited by Dr_Tweak: Aug 2, 2006 - 10:21 AM

Just thought I'd chime in, I'm the other guy w/ a running JDM 4agze into a 6th gen. I dont post a lot anymore these days, at least not here, i spend more of my time on club4ag or just researchin on my own. Congrats on joining the gze community to the owner of the black 6th gen

One of these days I'll take some more pictures / video of the car running. I currently have it all apart again to fix some body issues and a few other things. When its back together I'll have upgraded sc'er boost, larger injectors, fmic, and full standalone. I'll keep you guys posted when all that finally goes down

-FAQ

nice to see you posting again on the site bro - cant wait to see more vids and pics of ur car, and good luck w/ the body work and such.... post more often! haha

Hi my name is Richard, and this was my car and my swap. First I would like to say Dr. Tweak did a very good job. Every thing works from my P/S to my A/C. Very professional work. He gave me a set price for labor and stuck to it even though it took many more hours then what i was charged.

Now to the car. I was very disapointed in the numbers on the dyno which was 130hp 145 ft/t. after drivng it i wasnt so upset it was smooth and quite a bit quiker then my modded 7afe. Although I noticed my boost was max psi at only 7lbs i knew there had to be something wrong. We figured out that it was my intercooler leaking a lil. so hopes went up a lil. on my 9.5 hour drive home i noticed my boost not holding at 7 and it just kept getting weaker adn weaker. After I made it home i checked the belt to the S/C and it was slipping a lot. I tighted it down nice and tight took it for a test drive and WOW

IT WAS A WHOLE NEW CAR BOOSTING AROUND 9.5 10 AND IT SCREAMS COMPLETELY DIFFERENT THEN WHEN IT WAS ON THE DYNO. once i get my new intercooler it should be AWSOME. I WOULD RECOMEND THIS SWAP FOR ANY 7AFE. MY BUDDY HAS A 92 300ZX and it should be a good run If your thinking of swaping a 4agze do it and call Tweak even if he doesnt do it he can help.

Thanks again Tweak

I will try to get videos if i can ever figure out how to post them.

That's nice... great work!

I want a 4age lol. Glad you like it

Doc where do u get your 4agze from and how much? Im thinking of going this route for more power.

>

same here.

That one came from Venus Auto and I think it was like $1600 shipped or so.

-Doc

anyone up for a twin charger project ? with the GZE ? I know HKS had a kit years ago but a custom one will be nice dont ya think ?

This post has been edited by teal_terrorGT: Jan 28, 2007 - 10:46 PM