Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #38543

GB: 5sfe headers...PICS and VIDS ON PAGE 3 - 6G Celicas Forums

Topic #38543 77 posts Started by pimped6gen
pimped6gen
#1
UPDATE ON THE LAST PAGE....

Hey guys I got it in! My car IS 100% completed. The header is a 4-1 design. The header is colored black and only requires modification to the length of the 02 sensors. Everything else bolts right up.

The pricing will be as follows--
1-9 people -215 shipped. Colored with black paint, and all gaskets
10-20 people -205 shipped. Colored with black paint, and all gaskets
I can do the whole system back to the cat, but just pm me if your intersted.

I got the header in, car runs great and pulls strong.

PICS and VIDS on page 3.

Send the money to jcamp13@comcast.net through paypal.
I would appreciate 3% added onto the final price, b/c once again, Im not making any money on this!
Thanks!

We'll end the name taking on Saturday July 15th
4-1 Header, All gaskets included
Only thing you'll need are 3 bolts,a spacer if needed, and wires to make your o2 sensors longer.
Any exhaust shop will be able to do this and should have the wire, and accesories on hand!

UPDATE ON THE LAST PAGE....

This post has been edited by pimped6gen: Sep 7, 2006 - 9:57 AM
My2Celi
#2
shoo im in.
<--- I miss :'' (
j0e_p3t
#3
wish i had a gt.
ss-iii splitters and 404 skirts areon. which means i need to update my sig.
romeovaj
#4

will the cost go down if we get more people?
94 5speed conversion Liftback GT
pimped6gen
#5
>
QUOTE(romeovaj @ Jun 22, 2006 - 7:16 AM) [snapback]447538[/snapback]
>
will the cost go down if we get more people?


yes, the cost is aproximate it will most likely go down depending on how many people we get.

1.)pimped6gen
2.)My2Celi

This post has been edited by pimped6gen: Jun 22, 2006 - 11:04 AM
Bigmeanbulldog55
#6
I'm in, but I want to see a picture of this thing, and I would like to know how "bolt on" it will be. Also, are you making money on this deal, or is this just a service you are offering just to help out?
Live Free, Be Happy
JFrost9
#7
>
QUOTE(Bigmeanbulldog55 @ Jun 22, 2006 - 11:53 AM) [snapback]447639[/snapback]
>
I'm in, but I want to see a picture of this thing, and I would like to know how "bolt on" it will be. Also, are you making money on this deal, or is this just a service you are offering just to help out?


x2. Count me "in" im not sure if ill i have a GT, but if i do, then ill be down.

if this is "This is going to be done. This is not a waste of time like most of the other header gb's. This is for real, my header is almost complete." like you said, why is it a feeler? =( lol.


This post has been edited by JFrost9: Jun 22, 2006 - 12:56 PM
I am now a part of the ihavemorethen16gc club!
pimped6gen
#8
>
QUOTE
>I'm in, but I want to see a picture of this thing, and I would like to know how "bolt on" it will be. Also, are you making money on this deal, or is this just a service you are offering just to help out?


Pics will be up friday june 30th. IT WILL BE BOLT ON..PROMISE. This is a service for you. The header for me will cost about 210 once completed. I am adding about 20 dollars for shipping. He said if I get 10-15 people he will work out a little bit of a price reduction with me.

>
QUOTE
>x2. Count me "in" im not sure if ill i have a GT, but if i do, then ill be down.

if this is "This is going to be done. This is not a waste of time like most of the other header gb's. This is for real, my header is almost complete." like you said, why is it a feeler? =( lol.


I wanted to make it a feeler to see how many of you want this header. I will change the topic name for you to GB:

1.)pimped6gen
2.)My2Celi
3.)Bigmeanbulldog55 (pending on pic)
4.)JFrost9 (pending on gt)

This post has been edited by pimped6gen: Jun 22, 2006 - 5:05 PM
Batman722
#9
I have a few questions...

will this header only replace the exhaust manifold and the primary cat ? and will bolt directly to our stock flex/down pipe ? and have a bung/flange for the front 02 sensor ? will a manifold gasket be included ? or an 02 sensor gasket ?

thanks
my st205 swapandour Beams swap
pimped6gen
#10
>
QUOTE(Batman722 @ Jun 22, 2006 - 11:20 PM) [snapback]447785[/snapback]
>
I have a few questions...

will this header only replace the exhaust manifold and the primary cat ? and will bolt directly to our stock flex/down pipe ? and have a bung/flange for the front 02 sensor ? will a manifold gasket be included ? or an 02 sensor gasket ?

thanks


yes it will replace the primary cat and will directly fit on your stock downpipe. Yes, this does include all flanges and bungs, as of right now i am unsure if it comes with either of the gaskets but ill check tommorow and get back to you.

Batman722
#11
>
QUOTE(pimped6gen @ Jun 22, 2006 - 11:28 PM) [snapback]447885[/snapback]
>
>
QUOTE(Batman722 @ Jun 22, 2006 - 11:20 PM) [snapback]447785[/snapback]
>
I have a few questions...

will this header only replace the exhaust manifold and the primary cat ? and will bolt directly to our stock flex/down pipe ? and have a bung/flange for the front 02 sensor ? will a manifold gasket be included ? or an 02 sensor gasket ?

thanks


yes it will replace the primary cat and will directly fit on your stock downpipe. Yes, this does include all flanges and bungs, as of right now i am unsure if it comes with either of the gaskets but ill check tommorow and get back to you.

good answers thumbsup.gif

I am in 70%, gotta decide a little more
my st205 swapandour Beams swap
LewFX
#12
how much is a dp gasket?
Batman722
#13
>
QUOTE(LewFX @ Jun 22, 2006 - 11:38 PM) [snapback]447889[/snapback]
>
how much is a dp gasket?

dp gasket is part # 90917-06066, about $7 - $8 from a dealer

also the ex manifold gasket is part # 17173-74040, about $20 - $25 from a dealer

also, 02 sensor gasket is part # 89466-20020, about $5 from the dealer
my st205 swapandour Beams swap
pimped6gen
#14
>
QUOTE(Batman722 @ Jun 23, 2006 - 4:13 AM) [snapback]447897[/snapback]
>
>
QUOTE(LewFX @ Jun 22, 2006 - 11:38 PM) [snapback]447889[/snapback]
>
how much is a dp gasket?

dp gasket is part # 90917-06066, about $7 - $8 from a dealer

also the ex manifold gasket is part # 17173-74040, about $20 - $25 from a dealer

also, 02 sensor gasket is part # 89466-20020, about $5 from the dealer


I do not believe that is needed is it? I believe its just suggested, is it not?
cg97
#15
im liking the sounds of this, gotta check the funds and ill get back to ya.
Batman722
#16
>
QUOTE(pimped6gen @ Jun 23, 2006 - 12:15 AM) [snapback]447898[/snapback]
>
>
QUOTE(Batman722 @ Jun 23, 2006 - 4:13 AM) [snapback]447897[/snapback]
>
>
QUOTE(LewFX @ Jun 22, 2006 - 11:38 PM) [snapback]447889[/snapback]
>
how much is a dp gasket?

dp gasket is part # 90917-06066, about $7 - $8 from a dealer

also the ex manifold gasket is part # 17173-74040, about $20 - $25 from a dealer

also, 02 sensor gasket is part # 89466-20020, about $5 from the dealer


I do not believe that is needed is it? I believe its just suggested, is it not?

it depends on the condition of your old gaskets. I would get new ones because mine are over 10 years old and baked, but it is up to you.

the other thing I have a problem with is 94 fed (non cali) GTs only have 1 02 sensor, all of the rest have 2. The front 02 sensor has the same fitting each year (flange) while 96+ has a bung fitting for it's rear 02 sensor.

It is shown in this pic (thanks Lew)

IPB Image

the top (front) is a flange while the bottom (rear) is a bung. I have 2 flanges for my 02s (94-95), other members have 1 of each (96+). There is no header that will accomidate 94-99 GTs easily.

my st205 swapandour Beams swap
creis
#17
if there only $230 I'll give it a try, kinda pissing me off that I can just swap the motor but thats a diff story.

anyway, I'm in.
chucho
#18
>
QUOTE(pimped6gen @ Jun 22, 2006 - 11:15 PM) [snapback]447898[/snapback]
>
>
QUOTE(Batman722 @ Jun 23, 2006 - 4:13 AM) [snapback]447897[/snapback]
>
>
QUOTE(LewFX @ Jun 22, 2006 - 11:38 PM) [snapback]447889[/snapback]
>
how much is a dp gasket?

dp gasket is part # 90917-06066, about $7 - $8 from a dealer

also the ex manifold gasket is part # 17173-74040, about $20 - $25 from a dealer

also, 02 sensor gasket is part # 89466-20020, about $5 from the dealer


I do not believe that is needed is it? I believe its just suggested, is it not?


Once you release the pressure by removing the old manifold the used gaskets are going to expand. So your gonna need new gaskets. Not like its that expensive. If you use the old one your chancing a leak which is not a good thing.
LewFX
#19
do you need a dp gasket, because i currently do not have one.

my header is a 4-1 not a 4-2-1

This post has been edited by LewFX: Jun 23, 2006 - 12:14 AM
BBW 99GT
#21
I'd like 2 see a few pics first and then depending on the final price....I could b down.
My Celi isFOR SALE
pimped6gen
#22
Ok guys sounds like we got a lot of interest here....enough to tell my man to start production. We will move forward once i get pics (June 30th), final pricing, and as we all know now we NEED gaskets. Thanks to everyone for your knowledge and help with answering everyone questions!

This post has been edited by pimped6gen: Jun 23, 2006 - 11:13 PM
Batman722
#23
your still missing something...did you read my post about the 02 sensors ? they are different for different years. There is no way to make one header to accomidate all years.

will this header be for 94-95 guys or 96+ ?
my st205 swapandour Beams swap
pimped6gen
#24
>
QUOTE(Batman722 @ Jun 24, 2006 - 5:13 AM) [snapback]448310[/snapback]
>
your still missing something...did you read my post about the 02 sensors ? they are different for different years. There is no way to make one header to accomidate all years.

will this header be for 94-95 guys or 96+ ?



Ok for sure, for 94 and 95 becuase I have a 95. Can someone please post up a pic of 96-99? I will be able to make them for that year too...just need to see where the o2 sensors are!
Thanks!
Bigmeanbulldog55
#25
All you need to do is add another o2 hold and have the header come with an optional cover plate for it. That way us 94-95 guys have our singal, and those 96+ guys can have their 2.
Live Free, Be Happy
QuintinGT
#26
that sounds like a good idea. but if you still need a Picture of the O2 sensors, heres one of my 96 celi.
IPB Image
Check out my thread
pimped6gen
#27
PLEASE READ....


Ok guys, I need someones 96-99 old gt header, so I have something to go off of. Is anyone willing to give there thiers? And, I will have one ready to make so the day I recieve your header I will send you your new one out the next day. Someone preferably on the east coast so I could have it to you as soon as possible, which will be only about 3 days from the day I recieved your old header to get the new one back to you. You will also be getting a deduction on your new header!

Anyone?

This post has been edited by pimped6gen: Jun 24, 2006 - 10:59 PM
creis
#28
should be easy to just add a 2nd tap for the 2nd senser lower to the base, dont really have to make it in the "exact location" since its gana be compleatly diff anyway I doubt it would make a big enough deal. actualy since the 2nd factory one is just mounted below the 1st cat you could go without it since its gana get the same reading as the top one and just put a Y in the wire to the first so it fakes it, (not 100% sure if you can put a Y in it and split the signal light that but its a thought.)
pimped6gen
#29
>
QUOTE(creis @ Jun 26, 2006 - 12:28 AM) [snapback]448782[/snapback]
>
should be easy to just add a 2nd tap for the 2nd senser lower to the base, dont really have to make it in the "exact location" since its gana be compleatly diff anyway I doubt it would make a big enough deal. actualy since the 2nd factory one is just mounted below the 1st cat you could go without it since its gana get the same reading as the top one and just put a Y in the wire to the first so it fakes it, (not 100% sure if you can put a Y in it and split the signal light that but its a thought.)



Can anyone second that? If the 96-99 gt's could splice the one o2 sensor into the other, I could just mass produce the one header for all gt's. Although, if this is not the case I will definatley make it possible to have 2 seperate bung holes for each o2 sensor.
Bigmeanbulldog55
#30
>
QUOTE(pimped6gen @ Jun 25, 2006 - 11:18 PM) [snapback]448852[/snapback]
>
>
QUOTE(creis @ Jun 26, 2006 - 12:28 AM) [snapback]448782[/snapback]
>
should be easy to just add a 2nd tap for the 2nd senser lower to the base, dont really have to make it in the "exact location" since its gana be compleatly diff anyway I doubt it would make a big enough deal. actualy since the 2nd factory one is just mounted below the 1st cat you could go without it since its gana get the same reading as the top one and just put a Y in the wire to the first so it fakes it, (not 100% sure if you can put a Y in it and split the signal light that but its a thought.)



Can anyone second that? If the 96-99 gt's could splice the one o2 sensor into the other, I could just mass produce the one header for all gt's. Although, if this is not the case I will definatley make it possible to have 2 seperate bung holes for each o2 sensor.

I've heard of the 96+ guys doing this before. I've never done it myself, but it's very possible to do.
Live Free, Be Happy
← Back to Topics

Page 1 of 3 (77 total posts)