PM'd
GT4WRC.COM
GT4WRC.COM
FS: Parting Out the Celica - 6G Celicas Forums
GT4WRC.COM
>
QUOTE
>6) Tein SS & cusco mounts
more info on this please.
1994 GT-S (BEAMS) swap complete
>
center ac vents spoken for by mywhite94celicagt - i'll put u 2nd in line
-- Low Beam DS rubber headlight seal spoken for by Jrost - the rest you can have for $8 + $4 (S/h)
Floor mats - only passenger side (dirty though
back mats - in good condition $15+ $5 (s/h) = $20 if you want - i'll go ahead and put u 1st in line for them
Rear wasjer nozzle - $5 s/h included if you get back mats and headlight seals
my ds speaker is out too - so you wouldn't want it
you can paypal at hunnie4287@yahoo.com or money order to 435 Matt Ln - Arlington, TX 76012 (Scott Nguyen)
QUOTE(dagreat1 @ Apr 14, 2006 - 12:10 AM) [snapback]421379[/snapback]
>
ok i'll take the glove box for the $20, um i dash part i wanted was actually the AC part, um the gasket is that black rubber thing that goes around the headlight and along the front of the hood, i was about to buy one, it might be hard to take off and u might rip it, so only give it to me if you are sure... um do u have floor mats?? and the 2nd he backs outta that rear veiw mirrow let me know and what about that rear washer nozzel... one other thing how much would you sell for you front driver side speaker?? i donno if i need one yet, mine just went out, it could be a wire but whats the price just in case....
ok where do i send the 20 dollars to?
ok i'll take the glove box for the $20, um i dash part i wanted was actually the AC part, um the gasket is that black rubber thing that goes around the headlight and along the front of the hood, i was about to buy one, it might be hard to take off and u might rip it, so only give it to me if you are sure... um do u have floor mats?? and the 2nd he backs outta that rear veiw mirrow let me know and what about that rear washer nozzel... one other thing how much would you sell for you front driver side speaker?? i donno if i need one yet, mine just went out, it could be a wire but whats the price just in case....
ok where do i send the 20 dollars to?
center ac vents spoken for by mywhite94celicagt - i'll put u 2nd in line
-- Low Beam DS rubber headlight seal spoken for by Jrost - the rest you can have for $8 + $4 (S/h)
Floor mats - only passenger side (dirty though
back mats - in good condition $15+ $5 (s/h) = $20 if you want - i'll go ahead and put u 1st in line for them
Rear wasjer nozzle - $5 s/h included if you get back mats and headlight seals
my ds speaker is out too - so you wouldn't want it
you can paypal at hunnie4287@yahoo.com or money order to 435 Matt Ln - Arlington, TX 76012 (Scott Nguyen)
>
rear view mirror (3rd in line)
-- i live like 5 minutes away from UTA -- yeah there are a couple of celica drivers around here - pretty good community we have here -
QUOTE(Nano @ Apr 14, 2006 - 6:38 AM) [snapback]421447[/snapback]
>
I'd like the rearview as well, and can pay for it immediately
On a side note, i was hanging out with a few friends in arlington when i picked up my celi... They live offa mitchell.
I'd like the rearview as well, and can pay for it immediately
On a side note, i was hanging out with a few friends in arlington when i picked up my celi... They live offa mitchell.
rear view mirror (3rd in line)
-- i live like 5 minutes away from UTA -- yeah there are a couple of celica drivers around here - pretty good community we have here -
>
celicarus just inform me when you take apart the sunroof and email me some pix, you can PM me or email me at pedz_5@yahoo.com ...
also if 6th_celi_vert didnt take the driver side high beam hit me up too, therefore i can send payment to your paypal account..
thanks
QUOTE(celicarus @ Apr 13, 2006 - 8:43 PM) [snapback]421283[/snapback]
>
>
driver side high beam on hold for 6th_celi_vert -- $20 (2nd in line)
sunroof motor - will not take apart just yet - so when i do -i'll take pictures- ur 1st in line for that ($15)
>
QUOTE(pedzconcordia @ Apr 13, 2006 - 8:10 PM) [snapback]421268[/snapback]
>
i need driver side high beam...
how much?
and also sunroof motor but i need pics of sunroof motor coz i got one before from 95ST but its different from what i have. i have 97..
i need driver side high beam...
how much?
and also sunroof motor but i need pics of sunroof motor coz i got one before from 95ST but its different from what i have. i have 97..
driver side high beam on hold for 6th_celi_vert -- $20 (2nd in line)
sunroof motor - will not take apart just yet - so when i do -i'll take pictures- ur 1st in line for that ($15)
celicarus just inform me when you take apart the sunroof and email me some pix, you can PM me or email me at pedz_5@yahoo.com ...
also if 6th_celi_vert didnt take the driver side high beam hit me up too, therefore i can send payment to your paypal account..
thanks
metal ac lines and ac condensor (thing behind the radiator)
price?
price?
>
how does $50 sound?
QUOTE(brianforster @ Apr 14, 2006 - 2:21 PM) [snapback]421555[/snapback]
>
metal ac lines and ac condensor (thing behind the radiator)
price?
metal ac lines and ac condensor (thing behind the radiator)
price?
how does $50 sound?
pmd about the ac vents. when u get around to takin your other stuff apart, shoot me a price on the entire sunroof assembly with wiring and switch. i noticd the one guy already spoke for the motor and thats fine. shoot me a price for all that, including the headliner. can u send me some pics of the headliner, cause im sure i can cut mine to fit but id rather not. send pics to treyhester@yahoo.com. thanks
94 celica GT90 Civic Si
how much for the rotors?
To live, is to sufferTo survive, thats to find meaning, in the suffering....
>
how about $30 for all 4
QUOTE(bloodrain @ Apr 14, 2006 - 5:26 PM) [snapback]421637[/snapback]
>
how much for the rotors?
how much for the rotors?
how about $30 for all 4
>
sounds great! shipping will be to 20636, these seem like parts you wont take off untill your completely done with the car so thats totally fine, just PM me when you have them ready for shipping!
QUOTE(celicarus @ Apr 14, 2006 - 7:33 PM) [snapback]421560[/snapback]
>
>
how does $50 sound?
>
QUOTE(brianforster @ Apr 14, 2006 - 2:21 PM) [snapback]421555[/snapback]
>
metal ac lines and ac condensor (thing behind the radiator)
price?
metal ac lines and ac condensor (thing behind the radiator)
price?
how does $50 sound?
sounds great! shipping will be to 20636, these seem like parts you wont take off untill your completely done with the car so thats totally fine, just PM me when you have them ready for shipping!
If dagreat1 doesn't take the passenger window motor, how much for both driver and passenger side power window assemblies?
>
I'm also interested
QUOTE(Outsider @ Apr 15, 2006 - 2:36 AM) [snapback]421514[/snapback]
>
>
more info on this please.
>
QUOTE
>6) Tein SS & cusco mounts
more info on this please.
I'm also interested
98 ST204 ZR - Black Beauty - Roaming the streets of Sydney73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser75 TA22 LT - Snow White - Mint Classic Weekend Cruiser77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser94 MX-5 NA8 Clubman - Red Racer - Looking for cornersWIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona86 Corona RT142 - Daily Driver6GC 4 Life Baby!!!
>
guys read that post again, its #6 among the list of things he is keeping, so chances are you being interested doesnt do alot of good lol....
QUOTE(celicarus @ Apr 13, 2006 - 5:45 PM) [snapback]421197[/snapback]
>
Hello All.
I got a great deal on a 98 GT Manual for my 3sgte project, so I will be parting out the 96 GT auto I have.
Parts that WILL NOT be parted out -
1)front bumper
2) hood
3) passenger fender
4) steering wheel
5) Passenger side headlights
6) Tein SS & cusco mounts
other than that every thing else can go.
on another note - this car has a little over 210k miles on it - so the engine is not in its best shape
The only catch is I will still need the 96 for 3 more wks to drive around, but if there are parts that I can remove but still have car driveable than I can send right away. As far as price goes - shoot me reasonable offers here or pm or email me directly. Not really looking to make profit, but just wanted to get some $$$ back from the 98 that I purchased. Part Pics can be taken upon request. For shipping quotes go to UPS and you can do the estimations from my zip 76012
Hello All.
I got a great deal on a 98 GT Manual for my 3sgte project, so I will be parting out the 96 GT auto I have.
Parts that WILL NOT be parted out -
1)front bumper
2) hood
3) passenger fender
4) steering wheel
5) Passenger side headlights
6) Tein SS & cusco mounts
other than that every thing else can go.
on another note - this car has a little over 210k miles on it - so the engine is not in its best shape
The only catch is I will still need the 96 for 3 more wks to drive around, but if there are parts that I can remove but still have car driveable than I can send right away. As far as price goes - shoot me reasonable offers here or pm or email me directly. Not really looking to make profit, but just wanted to get some $$$ back from the 98 that I purchased. Part Pics can be taken upon request. For shipping quotes go to UPS and you can do the estimations from my zip 76012
guys read that post again, its #6 among the list of things he is keeping, so chances are you being interested doesnt do alot of good lol....
I am now a part of the ihavemorethen16gc club!
How about the sunroof visor thing? It looks stylish. Is it stock? In good condition? How much? Thanks.
I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.
Former Celica Owner... RIP 08-2007Now proud owner of a 2007 Solara w/ TRD exhaust, TRD FTSB, TRD Lowering Springs & many other goodies...
>
1st in line for that - yes in good condition - and stock - $15 - need zip code to confirm s/h cost through usps
>
both for $10 - need zip code to confirm s/h cost through usps (1st in line)
----------------------------------------------
Side Skirts Sold to kash1355 (paid)
This post has been edited by celicarus: Apr 15, 2006 - 12:50 PM
QUOTE(Celicav @ Apr 15, 2006 - 9:21 AM) [snapback]421853[/snapback]
>
How about the sunroof visor thing? It looks stylish. Is it stock? In good condition? How much? Thanks.
How about the sunroof visor thing? It looks stylish. Is it stock? In good condition? How much? Thanks.
1st in line for that - yes in good condition - and stock - $15 - need zip code to confirm s/h cost through usps
>
QUOTE(beastman @ Apr 15, 2006 - 11:23 AM) [snapback]421873[/snapback]
>
I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.
I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.
both for $10 - need zip code to confirm s/h cost through usps (1st in line)
----------------------------------------------
Side Skirts Sold to kash1355 (paid)
This post has been edited by celicarus: Apr 15, 2006 - 12:50 PM
How much do you want for these pieces? The plastic things that the screws go into on my bar broke and the piece comes up instead of staying down. So I'd like a new bar. I assume it's to keep water out.
Also, this plastic piece that the bar attaches to broke, I'd need this piece as well. The left side, if it matters.
Sorry for the over-exposed pictures..someone was messing with my camera.
Also, this plastic piece that the bar attaches to broke, I'd need this piece as well. The left side, if it matters.
Sorry for the over-exposed pictures..someone was messing with my camera.
>
60439 is the zip code and PM your paypal and final price to me. Thanks.
QUOTE
>QUOTE(beastman @ Apr 15, 2006 - 11:23 AM)
I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.
both for $10 - need zip code to confirm s/h cost through usps (1st in line)
I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.
both for $10 - need zip code to confirm s/h cost through usps (1st in line)
60439 is the zip code and PM your paypal and final price to me. Thanks.
Former Celica Owner... RIP 08-2007Now proud owner of a 2007 Solara w/ TRD exhaust, TRD FTSB, TRD Lowering Springs & many other goodies...
Could i also get your mud guard, if its in good condition?
hey, when u take the car down, quote me on a price for throttle cables incase my other lead for the parts goes thru. thanks!
94' ST Coupe - 5sfe Motor swap and brake swap.
>
yoou can take it, something is wrong with my passenger window, but i dont' think its the motor
>
could u gimmie a final total with shipping and everything? don't do ups do usps and then i'll pay yo uafter everything goes through, and thats ok ill just buy floor mats
QUOTE(Flyinghumanoid @ Apr 14, 2006 - 7:14 PM) [snapback]421663[/snapback]
>
If dagreat1 doesn't take the passenger window motor, how much for both driver and passenger side power window assemblies?
If dagreat1 doesn't take the passenger window motor, how much for both driver and passenger side power window assemblies?
yoou can take it, something is wrong with my passenger window, but i dont' think its the motor
>
QUOTE(celicarus @ Apr 14, 2006 - 1:10 PM) [snapback]421535[/snapback]
>
>
center ac vents spoken for by mywhite94celicagt - i'll put u 2nd in line
-- Low Beam DS rubber headlight seal spoken for by Jrost - the rest you can have for $8 + $4 (S/h)
Floor mats - only passenger side (dirty though
back mats - in good condition $15+ $5 (s/h) = $20 if you want - i'll go ahead and put u 1st in line for them
Rear wasjer nozzle - $5 s/h included if you get back mats and headlight seals
my ds speaker is out too - so you wouldn't want it
you can paypal at hunnie4287@yahoo.com or money order to 435 Matt Ln - Arlington, TX 76012 (Scott Nguyen)
>
QUOTE(dagreat1 @ Apr 14, 2006 - 12:10 AM) [snapback]421379[/snapback]
>
ok i'll take the glove box for the $20, um i dash part i wanted was actually the AC part, um the gasket is that black rubber thing that goes around the headlight and along the front of the hood, i was about to buy one, it might be hard to take off and u might rip it, so only give it to me if you are sure... um do u have floor mats?? and the 2nd he backs outta that rear veiw mirrow let me know and what about that rear washer nozzel... one other thing how much would you sell for you front driver side speaker?? i donno if i need one yet, mine just went out, it could be a wire but whats the price just in case....
ok where do i send the 20 dollars to?
ok i'll take the glove box for the $20, um i dash part i wanted was actually the AC part, um the gasket is that black rubber thing that goes around the headlight and along the front of the hood, i was about to buy one, it might be hard to take off and u might rip it, so only give it to me if you are sure... um do u have floor mats?? and the 2nd he backs outta that rear veiw mirrow let me know and what about that rear washer nozzel... one other thing how much would you sell for you front driver side speaker?? i donno if i need one yet, mine just went out, it could be a wire but whats the price just in case....
ok where do i send the 20 dollars to?
center ac vents spoken for by mywhite94celicagt - i'll put u 2nd in line
-- Low Beam DS rubber headlight seal spoken for by Jrost - the rest you can have for $8 + $4 (S/h)
Floor mats - only passenger side (dirty though
back mats - in good condition $15+ $5 (s/h) = $20 if you want - i'll go ahead and put u 1st in line for them
Rear wasjer nozzle - $5 s/h included if you get back mats and headlight seals
my ds speaker is out too - so you wouldn't want it
you can paypal at hunnie4287@yahoo.com or money order to 435 Matt Ln - Arlington, TX 76012 (Scott Nguyen)
could u gimmie a final total with shipping and everything? don't do ups do usps and then i'll pay yo uafter everything goes through, and thats ok ill just buy floor mats
>
$10 for both pieces -
>
$15 total paypal - hunnie4287@yahoo.com
>
on hold for another buyer
>
$20 -
'Flyinghumanoid' - you have been bumped up to 2nd in line for passenger window motor assembly - driver side also 2nd in line
---------------------------------------------------------------------------------------------
you can paypal at hunnie4287@yahoo.com or money order to 435 Matt Ln - Arlington, TX 76012 (Scott Nguyen)
Dagreat1
could u gimmie a final total with shipping and everything? don't do ups do usps and then i'll pay yo uafter everything goes through, and thats ok ill just buy floor mats
Rear Washer Nozzle - $5
Glove Box - $20
head lights rubber seal + front hood rubber seal(except for DS low beam) - $8
not sure if i have your zip code to confirm shipping - but it'll proabably cost $15 for shipping
so total would be $48.00 -
QUOTE(AMCMoe @ Apr 15, 2006 - 1:18 PM) [snapback]421897[/snapback]
>
How much do you want for these pieces? The plastic things that the screws go into on my bar broke and the piece comes up instead of staying down. So I'd like a new bar. I assume it's to keep water out.
Also, this plastic piece that the bar attaches to broke, I'd need this piece as well. The left side, if it matters.
Sorry for the over-exposed pictures..someone was messing with my camera.
How much do you want for these pieces? The plastic things that the screws go into on my bar broke and the piece comes up instead of staying down. So I'd like a new bar. I assume it's to keep water out.
Also, this plastic piece that the bar attaches to broke, I'd need this piece as well. The left side, if it matters.
Sorry for the over-exposed pictures..someone was messing with my camera.
$10 for both pieces -
>
QUOTE(beastman @ Apr 15, 2006 - 3:47 PM) [snapback]421928[/snapback]
>
>
60439 is the zip code and PM your paypal and final price to me. Thanks.
>
QUOTE
>QUOTE(beastman @ Apr 15, 2006 - 11:23 AM)
I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.
both for $10 - need zip code to confirm s/h cost through usps (1st in line)
I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.
both for $10 - need zip code to confirm s/h cost through usps (1st in line)
60439 is the zip code and PM your paypal and final price to me. Thanks.
$15 total paypal - hunnie4287@yahoo.com
>
QUOTE(Nano @ Apr 15, 2006 - 6:44 PM) [snapback]421965[/snapback]
>
Could i also get your mud guard, if its in good condition?
Could i also get your mud guard, if its in good condition?
on hold for another buyer
>
QUOTE(celicast3sgte @ Apr 15, 2006 - 7:52 PM) [snapback]421986[/snapback]
>
hey, when u take the car down, quote me on a price for throttle cables incase my other lead for the parts goes thru. thanks!
hey, when u take the car down, quote me on a price for throttle cables incase my other lead for the parts goes thru. thanks!
$20 -
'Flyinghumanoid' - you have been bumped up to 2nd in line for passenger window motor assembly - driver side also 2nd in line
---------------------------------------------------------------------------------------------
you can paypal at hunnie4287@yahoo.com or money order to 435 Matt Ln - Arlington, TX 76012 (Scott Nguyen)
Dagreat1
could u gimmie a final total with shipping and everything? don't do ups do usps and then i'll pay yo uafter everything goes through, and thats ok ill just buy floor mats
Rear Washer Nozzle - $5
Glove Box - $20
head lights rubber seal + front hood rubber seal(except for DS low beam) - $8
not sure if i have your zip code to confirm shipping - but it'll proabably cost $15 for shipping
so total would be $48.00 -
is the center console plastic trim still available? (trim around deck)
also i'd like the gauge cluster and the a/c control if they are available
lmk, thanks
also i'd like the gauge cluster and the a/c control if they are available
lmk, thanks
----------------------6GC's FIRST V6----------------------JDM 96 MR2-T Faster - 94 Celica GT 3MZFE Funner - 99 Rav 4 AWD Handy
>
center console plastic trim $10.00
gauge cluster $15.00
ac control $15.00
1st in line for all 3 pieces
QUOTE(K-ESD @ Apr 16, 2006 - 5:29 PM) [snapback]422263[/snapback]
>
is the center console plastic trim still available? (trim around deck)
also i'd like the gauge cluster and the a/c control if they are available
lmk, thanks
is the center console plastic trim still available? (trim around deck)
also i'd like the gauge cluster and the a/c control if they are available
lmk, thanks
center console plastic trim $10.00
gauge cluster $15.00
ac control $15.00
1st in line for all 3 pieces
see page 1 for an updated list of whats on hold and for who along with price given --
i guess you can put me 2nd in line for the metal AC lines...
i still plan on buying the ac condensor + metal lines just waiting on the car to actually be torn down
also on your spreadsheet you have me down as 2nd in line for side skirts but its not actually under my name
how much would you want for the 2 pieces the crash bar mounts to? they slide into the frame and are held in by 2 bolts each.
just waiting on the car to actually be torn downalso on your spreadsheet you have me down as 2nd in line for side skirts but its not actually under my name
how much would you want for the 2 pieces the crash bar mounts to? they slide into the frame and are held in by 2 bolts each.
>
glad u caught my mistake - though i would of figured it out -
i may need those 2 pieces for the 98 -- not sure yet until the 98 arrives --
on another note -- does anyone have any information on shipping to canada from the US -- the rate quotes I'm getting from DHL and UPS are over $100 -- more than what the item cost -- after speaking to the representatives - they said they only use one international rate, which is express - no standard, no ground - nothing cheap -- thats hard to believe --
and USPS - won't accept my package saying the size is more than what they can handle - and if i choose to go through with it - the surcharge will be very high
any suggestions from the canadian community is appreciated --
what i'm trying to ship off are my side skirts to kash1355
QUOTE(brianforster @ Apr 17, 2006 - 6:43 PM) [snapback]422666[/snapback]
>
i still plan on buying the ac condensor + metal lines just waiting on the car to actually be torn down
also on your spreadsheet you have me down as 2nd in line for side skirts but its not actually under my name
how much would you want for the 2 pieces the crash bar mounts to? they slide into the frame and are held in by 2 bolts each.
i still plan on buying the ac condensor + metal lines
just waiting on the car to actually be torn downalso on your spreadsheet you have me down as 2nd in line for side skirts but its not actually under my name
how much would you want for the 2 pieces the crash bar mounts to? they slide into the frame and are held in by 2 bolts each.
glad u caught my mistake - though i would of figured it out -
i may need those 2 pieces for the 98 -- not sure yet until the 98 arrives --
on another note -- does anyone have any information on shipping to canada from the US -- the rate quotes I'm getting from DHL and UPS are over $100 -- more than what the item cost -- after speaking to the representatives - they said they only use one international rate, which is express - no standard, no ground - nothing cheap -- thats hard to believe --
and USPS - won't accept my package saying the size is more than what they can handle - and if i choose to go through with it - the surcharge will be very high
any suggestions from the canadian community is appreciated --
what i'm trying to ship off are my side skirts to kash1355
how much for the hatch panel door? the door that you open for access to the jack?
also the entire rear interior hatch panel(covers the area for taillights...
also the entire rear interior hatch panel(covers the area for taillights...