When drilling for the motor mount i'm slightly confused on how to get the nut inside the frame?
for the bolt to hold the mount down...

the "how-to" isn't very detailed..

PM Jeff guy, he willasnwer all you questions

You arent able to get inside the frame. You need to buy the drill bit that is pictured in my how-to and drill through the frame. Buy some high strenght threaded rod, nylon lock nuts, thread locker. Make you own bolts

About 7 to 7 1/2 inches long one nut on each end of the rod.

o so your putting it all the way through the frame gotcha

I drilled a 1" hole in the side of the frame, just large enough to get a wrench and nut in there. Just dont drop the nut, cause you'll never get it back!