Starcraftjunkie

#1

Would that fit on our car? It's from a '93 celica

I put the pics on my profile.

This post has been edited by Starcraftjunkie: Feb 24, 2006 - 9:19 PM

presure2

#2

its shorter than the 94+ ones.

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

Bigmeanbulldog55

#3

I don't see the egr thing. I had a 90 GT, it didn't seem different, but I never looked at it too close. I'd take Presure's word for it.

---

Live Free, Be Happy

creis

#4

looks a good 1/2 to an inch shorter, the stock shaped plug wires will not fitt, (both too tall and square) dont konw if 5th gen wires would fit but could mod em.

thats a nice looking cover though, well polished.

Starcraftjunkie

#5

dang it.. someone was selling it local for cheap too.

creamed_corn

#6

That's from a 93 celica? It doesn't look anything like the normal 5S vavle cover.

Would that mean that the cylinder head is longer in a 94+ celica as opposed to a 93- celica?

This post has been edited by creamed_corn: Feb 24, 2006 - 11:59 PM

creis

#7

^ i dont know, never looked close at a 5th gen cover, but if the shop is selling it cheap could buy it, and re-sell it for more.

Silver94CelicaOwner

#8

I've seen a few 93 GT/GTS that have the EXACT same valve cover as 6th gen GT's, thats when they started using the newer generation motor if im not terribly mistaken. I went to high school with a guy that had the exact same motor in his 93' GT as my 94' GT, and he claimed it was stock. Also i know that ive seen 93+ MR2 NA with our valve cover.

If it doesnt look just like your current valve cover and doesnt have an EGR port, then forget it.

---

3rd gen ST205 3SGTE - Alive and boosting.

creamed_corn

#9

OKay, so I have a cylinder head sitting here from a 93 camry (without valve cover) does that mean it won't fit on my 94 celica? All the gaskets I ordered were for a 94, and they all seem to fit. What the hell is up?

Bigmeanbulldog55

#10

>

QUOTE(creamed_corn @ Feb 25, 2006 - 2:01 PM) [snapback]399533[/snapback]

>
OKay, so I have a cylinder head sitting here from a 93 camry (without valve cover) does that mean it won't fit on my 94 celica? All the gaskets I ordered were for a 94, and they all seem to fit. What the hell is up?

I think that will work.

---

Live Free, Be Happy

creamed_corn

#11

>

QUOTE(Bigmeanbulldog55 @ Feb 25, 2006 - 3:02 PM) [snapback]399534[/snapback]

>
>

QUOTE(creamed_corn @ Feb 25, 2006 - 2:01 PM) [snapback]399533[/snapback]

>
OKay, so I have a cylinder head sitting here from a 93 camry (without valve cover) does that mean it won't fit on my 94 celica? All the gaskets I ordered were for a 94, and they all seem to fit. What the hell is up?

I think that will work.

Yeah, I've looked over the heads and the look identical. The only thing I question is that the timing wheel on the camry head looks a lot bigger than the one on the celica. I'll let you know what happens once I swap them in a few weeks.

creis

#12

>

QUOTE

>so I have a cylinder head sitting here from a 93 camry (without valve cover) does that mean it won't fit on my 94 celica?

um, the gen years of the camry and celica are not the same. cant cross compare like that, its all on the motor specs. I think a 93 camry (5sfe) head is identical to the celica (5sfe) head.

This post has been edited by creis: Feb 26, 2006 - 2:39 AM