so we got over the whoe issue with the 5sfe headers, but i need a cat back and i found people that made them but they either don't sell them anymore or they are discontiued. what other car could i buy a cat back from?, or the mr2 again?
5sfe cat-back - 6G Celicas Forums
Try Greddy SP2 cat back exhaust.
Someone said they are discontinued, but they were
still available on ebay the last time I saw them.
Someone said they are discontinued, but they were
still available on ebay the last time I saw them.
98 ST204 ZR - Black Beauty - Roaming the streets of Sydney73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser75 TA22 LT - Snow White - Mint Classic Weekend Cruiser77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser94 MX-5 NA8 Clubman - Red Racer - Looking for cornersWIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona86 Corona RT142 - Daily Driver6GC 4 Life Baby!!!
go custom for $250-$300 ($100 muffler, $40 resonator, $100-150 piping with labor), sp2 is $450 or more.
it wouldnt make a differnce between hks, greddy, or any other brand if u go custom?? What makes name brand exhaust system differnt from any exhaust? beside size
<--- I miss :'' (
>
Your better to go custom because it's rather a 5sfe, or a 7afe. You're not going to pick up a ton with exhaust. Just make it as free flowing and strate as possable. Best size is 2.25. Good luck finding it though. You'll most likely have to go with 2.0 or 2.5.
QUOTE(My2Celi @ Jan 29, 2006 - 11:33 PM) [snapback]386289[/snapback]
>
it wouldnt make a differnce between hks, greddy, or any other brand if u go custom?? What makes name brand exhaust system differnt from any exhaust? beside size
it wouldnt make a differnce between hks, greddy, or any other brand if u go custom?? What makes name brand exhaust system differnt from any exhaust? beside size
Your better to go custom because it's rather a 5sfe, or a 7afe. You're not going to pick up a ton with exhaust. Just make it as free flowing and strate as possable. Best size is 2.25. Good luck finding it though. You'll most likely have to go with 2.0 or 2.5.
Live Free, Be Happy
hmm i might as well do a swap! geeeshus hard to find parts lol.
<--- I miss :'' (
last I sw you can get the SP2 system at http://www.importsolutions.net for about 350$
-Brian
>
they only have the SP and it's $354.
I would say to go custom with like a magnaflow muffler, cat or no cat (i still don't know if i'll get one since i don't have emissions restrictions here), and a resonator. Have a shop fabricate the rest. 2.25 inch piping
QUOTE(Celiracer18 @ Feb 4, 2006 - 7:27 PM) [snapback]389000[/snapback]
they only have the SP and it's $354.
I would say to go custom with like a magnaflow muffler, cat or no cat (i still don't know if i'll get one since i don't have emissions restrictions here), and a resonator. Have a shop fabricate the rest. 2.25 inch piping
1999 Celica GT
I went custom for about $250...Big Als Muffler shop did it lol.
>
Yeah but the sound of the greddy vs. your magnaflow is night and day
QUOTE(blu94gt @ Feb 5, 2006 - 2:50 AM) [snapback]389124[/snapback]
>
>
they only have the SP and it's $354.
I would say to go custom with like a magnaflow muffler, cat or no cat (i still don't know if i'll get one since i don't have emissions restrictions here), and a resonator. Have a shop fabricate the rest. 2.25 inch piping
>
QUOTE(Celiracer18 @ Feb 4, 2006 - 7:27 PM) [snapback]389000[/snapback]
they only have the SP and it's $354.
I would say to go custom with like a magnaflow muffler, cat or no cat (i still don't know if i'll get one since i don't have emissions restrictions here), and a resonator. Have a shop fabricate the rest. 2.25 inch piping
Yeah but the sound of the greddy vs. your magnaflow is night and day
how many people have a mandrel bent custom exhaust? most places here can make a custom exhaust for 200-300cdn + taxes w/o hi-flo cat but they are all crush-bent which probably does more bad then good
when i ask for a mandrel bent w/ t304(?) stainless steel the price skyrockets to around 700-1000cdn + taxes
greddy sp2 over here is 800cdn + tax
This post has been edited by elvasoshexai: Feb 5, 2006 - 6:09 PM
when i ask for a mandrel bent w/ t304(?) stainless steel the price skyrockets to around 700-1000cdn + taxes
greddy sp2 over here is 800cdn + tax
This post has been edited by elvasoshexai: Feb 5, 2006 - 6:09 PM
98 Celica GT -- 5S-FTE: 230WHP 237FT-LBS06 Civic EXMy For Sale Thread