Anyone? Let me know for how much, i checked parts.com, but i want to check here and allow people to make some money here at least. Plus ill probably get a better deal here.
WTB: GT harness and ECU(manual tranny) - 6G Celicas Forums
I have a 5sfe ecu (5 spd) from a 94 celica
$50 + shipping
let me know
$50 + shipping
let me know
>
If you are doing a tranny swap, I've been told there is some trick you can do to keep the same ecu (but wire the clutch pressed switch in, instead of the shift lock switch. It was posted on the old celica.net way back when (I think a guy named Dazed - something posted it....I will do some searching...)
Not sure if that's why you needed it or not, but just a heads up...
QUOTE(sugarfree @ Jan 17, 2006 - 2:25 PM) [snapback]379953[/snapback]
>
Anyone? Let me know for how much, i checked parts.com, but i want to check here and allow people to make some money here at least. Plus ill probably get a better deal here.
Anyone? Let me know for how much, i checked parts.com, but i want to check here and allow people to make some money here at least. Plus ill probably get a better deal here.
If you are doing a tranny swap, I've been told there is some trick you can do to keep the same ecu (but wire the clutch pressed switch in, instead of the shift lock switch. It was posted on the old celica.net way back when (I think a guy named Dazed - something posted it....I will do some searching...)
Not sure if that's why you needed it or not, but just a heads up...
sugarfree didn't you just buy the BEAMS engine? If so, you will need the ECU for that engine.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
>
Ah, I didn't realize he was switching engines as well.... Good call.
QUOTE(jgreening @ Jan 18, 2006 - 7:29 AM) [snapback]380303[/snapback]
>
sugarfree didn't you just buy the BEAMS engine? If so, you will need the ECU for that engine.
sugarfree didn't you just buy the BEAMS engine? If so, you will need the ECU for that engine.
Ah, I didn't realize he was switching engines as well.... Good call.
>
The beams will come with an ECU and harness, but im wanting to buy an ECU and harness for a Manual GT because im going to send both Beams and GT harness and ECU to Dr. Tweak so he can harness them for me, while i can still use my car to drive.
QUOTE(jgreening @ Jan 18, 2006 - 9:29 AM) [snapback]380303[/snapback]
>
sugarfree didn't you just buy the BEAMS engine? If so, you will need the ECU for that engine.
sugarfree didn't you just buy the BEAMS engine? If so, you will need the ECU for that engine.
The beams will come with an ECU and harness, but im wanting to buy an ECU and harness for a Manual GT because im going to send both Beams and GT harness and ECU to Dr. Tweak so he can harness them for me, while i can still use my car to drive.
PM orvillescelica and rjb23 - they may have spare ECU's sitting around.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
Cool. Thanks.
what year is your car? that will depend on what ecu you need to buy. i have and obd2 manual ecu if u need that.
15PSI - 30MPG - Megasquirt Tuned
hell yea lagos thats what im talkin about.
You don't need the GT ecu. Just get the harness. 
-Doc
-Doc
-Dr Tweak, 6GC's resident engine swap wiring expert extraordinaireClick here to see my swapsdrtweak@phoenixtuning.com