I'm having problems with my new jdm 7afe that i just bought, Somehow i crank the car but cant seem to start the car. I check out everthing from wire to fuse but everything seem to work somehow its not getting any spark from the spark plug wires so i went ahead and bought a complete new distributor with cap, rotor including a new set of ngk wires and its still not getting any spark from the engine...any help????

bump! come on help

Could be your coil or ignitor. Check them both out.

its still not working even though i replaced them with new ones !

that new distributor you put in, did it have all new internals? if not you might want to replace the condenser inside the dist. under the cap. it's the little firecracker looking part inside the cap. will only cost you about $3-$4. if not that, make sure there aren't any frayed or pinched wires along the ignition sysytem.

Check to make sure you're getting power at the coil and ignitor.

-Doc

check to make sure that the JDM wiring will actually work with the USDM wiring. You might have a wiring problem. If I am correct, JDM does not have that *Thingy* (oh man im getting rusty on skills not working on my car for a month now....) that regulates smog and stuff.

^egr

This post has been edited by JoKeRkId613: Dec 27, 2005 - 11:40 PM

alright so i decied to took the car to a shop..and they told me that everything seems to be working but they cant seem to find the problemss..so i might think that the motor went out on me....back to the drawing board...urghhhhhhhh.

I was just down there in Fresno for the new year... I coulda check it out for you... =/

Umm... when you crank the car... does the tach move at all?