snapshotgt

#1

Hey guys, i have a toggle switch i'm installing in the cabin...and i cannot figure where to put it? Any suggs?

shoot me your thoughts?

later,
snapshotgt

This post has been edited by snapshotgt: Nov 22, 2005 - 1:10 PM

---

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor

afroman

#2

i voted middle panel,but dude come on. there are a million and ahalf threads about switches and switch panles where people put them. if you searched do it again untill you find something.its out there.
-Aaron-

purplegt4

#3

i put my antenna switch underneath the steering wheel...if you look there's two rectangle pieces that can pop out. the little black switch i used fits perfectly there.

Coomer

#4

What's the toggle switch for? If it's something not used often, like something to change alarm settings, I'd put it inside the glovebox. Above the glovebox, under the dash would work well for a fairly hidden switch if your friends are easily entertained by toggle switches.

---

New Toyota project coming soon...

creis

#5

For that switch I would put it some place easy to reach, I did not like it down on the kick plate. its kinda a big switch though, you might want to replace it, I think one with a little LED to show that its on would be cool.

snapshotgt

#6

thanks guys for the suggs...

i like your idea chris.....

it is a toggle switch that i'll be using quite a bit...on/off

...think LED by the window control...that's my vote...what do you think?

out-

---

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor

snapshotgt

#7

Alright boyzzzzz, the poll has spoken! (and myself--lol) Somewhere in the center! Post pics soon on where i'm putting it...

later dudes...

---

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor

celi_gt_racer

#8

NOOOOO... i must put in my 2 cents.... you need to turn your ciggarette lighter into a switch... and when you push it in - current flows, when you pull it out - current is blocked..... my dad converter the lighter into a switch on my old 94 celica- it was pretty pimp

Cutrara

#9

I just have to show off:

---

QUOTE (cjh4l22 @ May 15, 2009 - 4:02 AM)hey, nice mod does it come in hetero?Need parts?I'm parting out a '94 ST

creis

#10

^ yeah I like that.

do you have a stock alarm, how about putting the switch on that little plasic peace there the stock alarm LED is, just pop out that peace and drill a hole and place the switch, its deff not perminate if you ever want to take it out, and its kinda hidden if you want that too.

blu94gt

#11

I still vote the AC vent spot, there's a button at Autozone that fits there perfectly. When I finally pick some fogs that's where my button will be

---

1999 Celica GT

snapshotgt

#12

alright, here are the pics...



another one:



what do yo guys think - - i dig it myself...

---

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor

Phat_99CeliGT

#13

not bad.
same place i put all my switches, but i glassed over the cig lighter and the hole and i have 1-round switch for my underbodies, 1-round switch for my police strobes with a small momentary button to change the pattern. next im getting about 3 small toggles to use for other neons.

---

Jared Harwell

jdg371

#14

I like cutrara's theyr stealthy hehe

snapshotgt

#15

yeah, cutrara's switches are pretty nice in the hizzzo, i'd do that if i had more...lol...plus that bay is holding my remote for my head unit:D...

i really liked how it turned out...

---

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor

Cutrara

#16

Thanks guys, I just got a scrap piece of plexiglass from school and cut it. I like things to look stock.

Looking good snapshot

---

QUOTE (cjh4l22 @ May 15, 2009 - 4:02 AM)hey, nice mod does it come in hetero?Need parts?I'm parting out a '94 ST

blu94gt

#17

>

QUOTE(Phat_99CeliGT @ Nov 22, 2005 - 3:36 PM) [snapback]358496[/snapback]

>
not bad.
same place i put all my switches, but i glassed over the cig lighter and the hole and i have 1-round switch for my underbodies, 1-round switch for my police strobes with a small momentary button to change the pattern. next im getting about 3 small toggles to use for other neons.

where did you get your police strobe controller? i've been looking for a controller but can't find a good one. idk how well a cheapo ebay one would be but who knows lol

---

1999 Celica GT

Phat_99CeliGT

#18

i have REAL police strobes.
Whelen 60 watts.

i got everything for under $200 shipped.

---

Jared Harwell

snapshotgt

#19

thanks guys...

btw, today i fix the switch...it was a little crooked (like in the pics)...but i'm a perfectionist....so it look hopin' now...LOL

later.

---

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor

creis

#20

looks good.

snapshotgt

#21

>

QUOTE(creis @ Nov 23, 2005 - 12:27 AM) [snapback]358686[/snapback]

>
looks good.

thx

---

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor

95CelicaST

#22

what exactly is the switch for?

---

1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket