hey guys what mm bolts are soposed to screw in the 2 mounting spots on the fire wall on the stock gt front strut bar?
quick question about stock gt front strut bar - 6G Celicas Forums
14mm
$1.99 for 2 at autozone.
This post has been edited by LewFX: Nov 19, 2005 - 1:29 PM
This post has been edited by LewFX: Nov 19, 2005 - 1:29 PM
thanks a lot for your help guys.
i went to my used toyota dealership & got them free. just look thru their box-o-nuts&bolts
>
i got a big bag full of nuts and bolts i took off from my clip for stuff like that..hahaha
QUOTE(purplegt4 @ Nov 20, 2005 - 12:46 AM) [snapback]357445[/snapback]
>
i went to my used toyota dealership & got them free. just look thru their box-o-nuts&bolts
i went to my used toyota dealership & got them free. just look thru their box-o-nuts&bolts
i got a big bag full of nuts and bolts i took off from my clip for stuff like that..hahaha
15PSI - 30MPG - Megasquirt Tuned
yea every shop basically has one! my drawer didn't have these bolts that's why i went up there! i just took the box out to my car and trial & errored.
ok guys its not 14mm its prab going to be a 12mm im guessin.14MM DID NOT FIT!
lol good old reliable 6gc.net knowledge lol
KawiLove
>
it is 14mm, because i just bought em for my c-one. mayube the thread on yours is bad.
QUOTE(trdevelopment @ Nov 22, 2005 - 12:38 AM) [snapback]358252[/snapback]
>
ok guys its not 14mm its prab going to be a 12mm im guessin.14MM DID NOT FIT!
ok guys its not 14mm its prab going to be a 12mm im guessin.14MM DID NOT FIT!
it is 14mm, because i just bought em for my c-one. mayube the thread on yours is bad.
10 or 12mm, bolts are measured by the thread diameter and pitch, 14mm is the wrench size, so probably 10mm,
be sure you get the correct pitch also, those come in 1.0, 1.25 or 1.5 threads per mm pitch. body bolts are usually the coarser thread, so most likely a 10x1.0.
Whatever size it is, be SURE it will start and go in at least 3 or 4 turns by hand before you put it together, dont force anything.
be sure you get the correct pitch also, those come in 1.0, 1.25 or 1.5 threads per mm pitch. body bolts are usually the coarser thread, so most likely a 10x1.0.
Whatever size it is, be SURE it will start and go in at least 3 or 4 turns by hand before you put it together, dont force anything.