well got my new celica black but its a 94 but i still like it. does anyone have a good set up in mind if i would want to do autocrossing. i have tein ss springs and kyb shocks but i dont think that they would do for autocrossing..what do you guys thin would be good for my i mean suspension wise...
auto cross set up - 6G Celicas Forums
depends what class you plan on running in. Light suspension tuning differs between cars and drivers... so there isn't really an ideal set-up. Lower and stiffer is always good... the rest of it depends on how you drive.
This post has been edited by Kwanza26: Nov 9, 2005 - 12:08 AM
This post has been edited by Kwanza26: Nov 9, 2005 - 12:08 AM
"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
tein ss springs? I believe the SS are coilovers and the S-techs are springs..
MY ideal setup would be as follows:
TEIN SS coilovers w/EDFC
ST Sway bars
Cusco Strut bars
Brembo big brake kit
Advan Supers (black w/ red lip)
Energy Suspension Bushings and all that crap
MY ideal setup would be as follows:
TEIN SS coilovers w/EDFC
ST Sway bars
Cusco Strut bars
Brembo big brake kit
Advan Supers (black w/ red lip)
Energy Suspension Bushings and all that crap
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
>
> roll cage wouldn't hurt either
> roll cage wouldn't hurt either
yes and a roll cage. If I bought another Celica I would make it my autocross car. Gut it and put on all the stuff above and go have fun.
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
remember that just some minor mods might put you in a different bracket than stock...
o YEAAA!!!!!! dont forget that blacktop 20v
-purplegt4+Nov 9, 2005 - 2:59 PM
Yah, high revs around the corners are really good especially if you have an cast iron block that can take any abusing.
QUOTE(purplegt4 @ Nov 9, 2005 - 2:59 PM)
o YEAAA!!!!!! dont forget that blacktop 20v
[right][snapback]355096[/snapback][/right]
[right][snapback]355096[/snapback][/right]
Yah, high revs around the corners are really good especially if you have an cast iron block that can take any abusing.
If you want to run in stock class just get sway bars, they make huge difference and may be nobody will notice them.
well if a judge is inspecting them...he might see my red bushings, you can see them through the rim i believe >
>
>