97lestyousay

#1

:

This post has been edited by 97lestyousay: Apr 4, 2012 - 7:54 PM

---

JDM guy made me do it.

FallenHero

#2

rods explode. >>

97lestyousay

#3

:

This post has been edited by 97lestyousay: Apr 4, 2012 - 7:54 PM

---

JDM guy made me do it.

FallenHero

#4

stock tranny is supposedly good for 200whp. However, I think Frotou was pushing 240whp with the stock tranny and upgraded clutch. Nik is also about to test it's limits... unless he went with a GZE tranny.

nik

#5

the rods are like finger width so they go first or the bearings as for the tranny im looking for an lsd for my c52 i dont know the limit but i think ray hall on his 7agte used a stock mr2 tranny so if this one goes i probably try the gze one

---

yea your 3sgte is cool but ill stick to my 7agte

soulshadow

#6

Bearings on mine went first, then rods

gamesteristj

#7

bearings on mine but that was due to a oil pan gasket leak!

playr158

#8

building a 7afte (7agze)

i'd get all new bearings and rebuild the motor first...
with some upgraded pauter rods...and some better pistons

those are the 3 things that would worry me